Export limit exceeded: 409968 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409968 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98540 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Terminate the fgraph_data list when the reservation is not filled fprobe_fgraph_entry() reserves shadow stack space for every fprobe with an exit handler, but only fills it for those whose entry handler returns 0. fgraph_reserve_data() does not clear the area, so fprobe_return() parses the unused tail as headers left over from an earlier call, and an exit handler can run twice or despite its entry handler asking to skip it. Write a zero word after the last entry to terminate the walk. A zeroed slot does not decode to a NULL fprobe on the arches that encode the header into one unsigned long, since arch_decode_fprobe_header_fp() ORs in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL for a zeroed slot. | ||||
| CVE-2026-98541 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fou: reject omitted FOU_ATTR_IPPROTO on FOU_ENCAP_DIRECT Commit 7a9bc9e3f423 ("fou: Don't allow 0 for FOU_ATTR_IPPROTO.") added NLA_POLICY_MIN(NLA_U8, 1) to fou_nl_policy[FOU_ATTR_IPPROTO], which rejects an explicitly supplied FOU_ATTR_IPPROTO == 0 attribute with -ERANGE. However, FOU_ATTR_IPPROTO is an optional netlink attribute. When a user sends FOU_CMD_ADD with FOU_ATTR_TYPE set to FOU_ENCAP_DIRECT and omits FOU_ATTR_IPPROTO entirely, nla_policy validation succeeds and parse_nl_config() leaves cfg->protocol as 0 (from memset(cfg, 0, sizeof(*cfg))). fou_create() then creates a FOU_ENCAP_DIRECT socket with fou->protocol == 0. In fou_udp_recv(), returning -fou->protocol to udp_queue_rcv_one_skb() triggers IP protocol resubmission when fou->protocol > 0, whereas returning 0 tells the UDP tunnel layer that the skb was consumed without freeing it. When fou->protocol == 0, every packet received on the socket returns 0 from fou_udp_recv() and leaks the sk_buff. Reject FOU_ENCAP_DIRECT when !cfg->protocol in fou_create() so that creating a direct encapsulation port without FOU_ATTR_IPPROTO fails with -EINVAL while leaving FOU_CMD_DEL and FOU_CMD_GET (which share parse_nl_config()) unaffected. Tested in QEMU against Linux 7.3.0-rc3 by sending a FOU_CMD_ADD Generic Netlink request with FOU_ATTR_PORT = 5555 and FOU_ATTR_TYPE = FOU_ENCAP_DIRECT while omitting FOU_ATTR_IPPROTO. On the unfixed kernel, FOU_CMD_ADD succeeds (err = 0), FOU_CMD_GET reports fou->type = 1 and fou->protocol = 0, and sending 4000 UDP packets to 127.0.0.1:5555 leaks all 4000 sk_buffs (SUnreclaim in /proc/meminfo grows from 41456 kB to 59008 kB, +17552 kB); with this patch applied, FOU_CMD_ADD is rejected with -EINVAL (-22). | ||||
| CVE-2026-98544 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bna: prevent IOC timer rearm during teardown bna: prevent IOC timer rearm during teardown bnad_pci_remove() and the probe disable_ioceth path call timer_delete_sync() for ioc_timer, sem_timer and hb_timer, but not for iocpf_timer. bnad_iocpf_timeout() then takes bnad->bna_lock after free_netdev() has freed the struct bnad. Deleting iocpf_timer last does not fix this. sem_timer and iocpf_timer rearm each other: bnad_iocpf_sem_timeout() can arm iocpf_timer, and bnad_iocpf_timeout() arms sem_timer from bfa_ioc_hw_sem_get() when the semaphore is busy. timer_delete_sync() only waits out its own callback. bnad_ioceth_disable() can time out and leave that callback live. Shut all four IOC timers down with timer_shutdown_sync() on both paths, so a later mod_timer() is ignored. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98545 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: bound the ATA passthru sense descriptor writes When an ATA PASS-THROUGH command to an ATAPI device fails, the sense buffer holds the device's REQUEST SENSE reply, and ata_scsi_set_passthru_sense_fields() trusts its additional length byte, sb[7], when adding the ATA Status Return descriptor. A faulty or malicious device can use that to make the kernel read and write past the 96-byte buffer in three ways: - scsi_sense_desc_find() is passed sb[7] + 8 as the buffer length, so its clamp against sb[7] does nothing and the walk runs off the end. - A type-9 descriptor found near the end is filled in unchecked. - A new descriptor at sb[8 + len] needs len + 22 bytes, not len + 14, so len 75..82 writes up to 8 bytes past the end. Reproduced with KASAN under qemu, with the emulated ATAPI REQUEST SENSE reply patched: BUG: KASAN: slab-out-of-bounds in scsi_sense_desc_find+0x1a5/0x210 BUG: KASAN: slab-out-of-bounds in ata_scsi_qc_complete+0x1a15/0x1a50 Both are gone with this patch, and a valid descriptor is still filled in. | ||||
| CVE-2026-85327 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7.8 High |
| Heap-based buffer overflow in Windows Print Spooler Components allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-95641 | 1 Adobe | 1 Photoshop | 2026-10-18 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-95640 | 1 Adobe | 1 Photoshop | 2026-10-18 | 5.5 Medium |
| Photoshop Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-95636 | 1 Adobe | 1 Photoshop | 2026-10-18 | 7.8 High |
| Photoshop Desktop is affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-95637 | 1 Adobe | 1 Photoshop | 2026-10-18 | 7.8 High |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-95638 | 1 Adobe | 1 Photoshop | 2026-10-18 | 7.8 High |
| Photoshop Desktop is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-98443 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix cursor and pointer handling when recovering iunlink buckets LOLLM pointed out a bug in xlog_recover_iunlink_bucket: 1. We don't null out prev_ip after releasing it, which can lead to UAF problems if the inodegc flush call in the loop fails. at which point I noticed even more bugs: 2. If the inodegc flush inside the loop fails, we also leak @ip. 3. We set prev_agino to agino having already advanced agino, which results in inodes with i_prev_unlinked set to itself. 4. If we exit the bottom of the loop with prev_ip set, then prev_ip aliases ip and we also set its i_prev_unlinked to itself. Bugs 3 and 4 introduce loops into the unlinked list, though these loops don't surface because we immediately flush each unlinked inode after loading it. Fix all of these issues. | ||||
| CVE-2026-98444 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: drop dquot flush lock when we can't find a buffer to flush LOLLM noticed that xfs_qm_flush_one fails to drop the dquot flush lock if it can't grab the buffer associated with the dquot. Since there's no buffer, nobody else is going to drop the dqflock, so we need to do it ourselves. | ||||
| CVE-2026-98445 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't let memory failures leak blocks and kill repairs LOLLM complains that a memory allocation failure in xrep_newbt_add_blocks results in online repair leaking blocks that were previously allocated to write a new btree, but the problem is worse than that -- a limitation of the codebase is that the callers cannot undo the transaction /and/ return the error -- either you undo all changes and commit the transaction, or you error out and the filesystem goes down. However, the new btree space reservation object isn't that big (~48 bytes). Let's just do a NOFAIL allocation and the problem goes away. | ||||
| CVE-2026-98448 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: release orphanage dir inode if chown fails LOLLM points out that we leak the igrab'd reference to the orphanage directory inode if chowning it fails. Fix that. | ||||
| CVE-2026-98464 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and destroys the VM supplies the teardown side of the race; no post-launch host ioctl is needed to arm or request teardown. On upstream master 62cc90241548, generic KASAN reported: BUG: KASAN: slab-use-after-free in do_raw_spin_lock Write of size 4 at addr ff60000005e58898 kvm_riscv_vcpu_set_interrupt kvm_riscv_vcpu_hrtimer_expired __hrtimer_run_queues hrtimer_interrupt The object was allocated by KVM_CREATE_VCPU and freed concurrently by: kvm_destroy_vcpus kvm_arch_destroy_vm kvm_destroy_vm __fput For deterministic validation, I added mdelay(1000) immediately after the existing next_set = false assignment. This only widens the existing post-clear callback window. A no-delay trace build naturally reached the callback-after-teardown-start/before-deinit ordering in 12 of 200 runs, but 1,500 stock-kernel stress iterations did not produce a KASAN report, so natural reproduction is timing-sensitive. Always invoke hrtimer_cancel() for an initialized timer. Preserve the existing -EINVAL result when the timer is no longer set, but only after synchronizing with a running callback. With this patch, hrtimer_cancel() blocked for the full widened callback window before vCPU destruction. KASAN reported no error in 100 fixed-and-widened runs or 200 fix-only timing-sweep runs. | ||||
| CVE-2026-98466 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Transfer the hyp stack pages out of the host stage-2 fix_host_ownership() walks only the linear-map alias of each memblock region, and the per-CPU hyp stack, mapped in the private VA range for its guard page, has none. Walk each stack's VA range with the same walker. | ||||
| CVE-2026-98479 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task and copies the PDU's data segment into that command's scatterlist without asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE. A target that answers a WRITE command's ITT with a Data-In therefore has the initiator write target-supplied bytes into the pages that write was about to send. Those are the caller's own pinned pages for an O_DIRECT write, and page cache pages for a buffered one. Observed against a test target that emits one 512-byte Data-In naming a 128 KB write's ITT, after the R2T for that write. With O_DIRECT the caller's buffer ends up holding 512 bytes of the target's data while pwrite() returns 131072. Buffered is quieter: pwrite() and fsync() both succeed, nothing is logged, and reading those blocks back returns the target's bytes out of the page cache without a command going on the wire. Check the direction before using the scatterlist, the way the R2T path already does. | ||||
| CVE-2026-98484 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip expired catchall elements on insert and delete nft_setelem_catchall_insert() looks up duplicates with nft_set_elem_active() only, while nft_set_catchall_lookup() and the dump path additionally skip expired elements. Once a catchall element with a timeout expires, this predicate drift makes it invisible to userspace dumps, yet it still blocks re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and without it the request reports success but silently inserts nothing. The stale entry only goes away when the (user-tunable) gc interval elapses, so the catchall rule may silently stop matching for an arbitrarily long time after its first expiration. The delete path shows the same drift: nft_setelem_catchall_deactivate() picks the first active-next entry in the catchall list, so with an expired entry still pending GC it retires the stale entry instead of the fresh one, and it deactivates an element that userspace no longer sees instead of failing with -ENOENT. Align both walks with the lookup and dump predicates: only an element that is active and not expired counts as a duplicate or delete candidate, using the per-netns timestamp taken at transaction start, in line with the set backend .insert/.deactivate and catchall GC sync paths. | ||||
| CVE-2026-98485 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0 even when address matching (IP6T_RT_FST_MASK) is requested. In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing addresses against rtinfo->addrs[i] and terminates backwards at the bottom of the loop: if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { i++; } if (i == rtinfo->addrnr) break; When addrnr is 0, if the first packet address matches rtinfo->addrs[0], i is incremented to 1. Because i is now strictly greater than addrnr (0), the loop termination condition (i == rtinfo->addrnr) is bypassed and will never be satisfied. If a crafted IPv6 packet contains matching routing addresses, i will advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal() reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings or kernel panics. Fix this by: 1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but rtinfo->addrnr is zero. 2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr) into the for-loop header condition and removing the backwards break at the end of the loop body. | ||||
| CVE-2026-98489 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: atl1c: fix soft lockup on out-of-range tpd_cons read The hardware can report an out-of-range tpd_cons (seen as 0xffff) while the PCIe link/MAC is resetting. An out-of-range value can never be reached and the loop below would spin forever. To avoid a soft lockup treat it as "nothing new to clean" instead. Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0, 4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that the ports are directly linked to: - Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap precursor, before the lockup was captured with a full trace elsewhere: atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex> 65535 (0xffff) here is the same value tpd_cons reads back once the loop below gets stuck. - Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time caught by the soft lockup watchdog with a full stack trace: watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329] CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy) RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c] Call Trace: <TASK> __napi_poll+0x32/0x1e0 napi_threaded_poll_loop+0x286/0x2e0 napi_threaded_poll+0xfd/0x140 kthread+0xf7/0x130 ret_from_fork+0x2da/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> | ||||