| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane. |
| knowns versions before 0.30.0 contain a path traversal vulnerability in the POST /api/templates/preview endpoint that allows unauthenticated attackers to read arbitrary files. Attackers can supply directory traversal sequences in the templateFile parameter to bypass path restrictions and read sensitive files like credentials and configuration through the JSON response. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: run deferred work on a module-owned workqueue
ovpn queues several work items whose callbacks execute module text.
These works currently run on the global system workqueues, so module
exit has no driver-owned drain point that guarantees the callbacks have
fully returned before the module text can be freed.
Object references protect the objects used by the callbacks, but they do
not prove that a workqueue function has returned. In particular, a
worker can drop the final reference that unblocks device teardown while
it is still executing ovpn code.
Add a module-owned workqueue and queue all ovpn work items on it. During
module exit, unregister rtnl and netlink first, flush the workqueue so
ordinary ovpn workers finish, run the final RCU barrier, and destroy the
workqueue last. This keeps the workqueue available for cleanup work
queued from RCU callbacks, while ensuring no ovpn work item can outlive
the module text.
The per-device delayed keepalive work remains explicitly disabled during
netdev teardown (disable_delayed_work_sync in ndo_uninit), since
flush_workqueue does not flush delayed work that is still only pending
on its timer. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: vmclock: prevent read-only mappings from becoming writable
vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock
ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the
page read-only and then upgrade it to writable with mprotect(), after
which the guest can corrupt the host-written timekeeping data (sequence
counter, UTC time, TSC offset) that the vmclock ABI defines as read-only.
Clear VM_MAYWRITE on the read-only path so the mapping cannot be
upgraded, as i915 does for its read-only objects and as fixed in drm/vc4
(CVE-2026-68445) and drm/panthor (CVE-2024-53071). |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for handle opening
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix incorrect pruning due to atomic fetch precision tracking
When backtrack_insn encounters a BPF_STX instruction with BPF_ATOMIC
and BPF_FETCH, the src register (or r0 for BPF_CMPXCHG) also acts as
a destination, thus receiving the old value from the memory location.
The current backtracking logic does not account for this. It treats
atomic fetch operations the same as regular stores where the src
register is only an input. This leads the backtrack_insn to fail to
propagate precision to the stack location, which is then not marked
as precise!
Later, the verifier's path pruning can incorrectly consider two states
equivalent when they differ in terms of stack state. Meaning, two
branches can be treated as equivalent and thus get pruned when they
should not be seen as such.
Fix it as follows: Extend the BPF_LDX handling in backtrack_insn to
also cover atomic fetch operations via is_atomic_fetch_insn() helper.
When the fetch dst register is being tracked for precision, clear it,
and propagate precision over to the stack slot. For non-stack memory,
the precision walk stops at the atomic instruction, same as regular
BPF_LDX. This covers all fetch variants.
Before:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs=r2 stack= before 2: (b7) r2 = 0
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit
After:
0: (b7) r1 = 8 ; R1=8
1: (7b) *(u64 *)(r10 -8) = r1 ; R1=8 R10=fp0 fp-8=8
2: (b7) r2 = 0 ; R2=0
3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2) ; R2=8 R10=fp0 fp-8=mmmmmmmm
4: (bf) r3 = r10 ; R3=fp0 R10=fp0
5: (0f) r3 += r2
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 4: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 3: (db) r2 = atomic64_fetch_add((u64 *)(r10 -8), r2)
mark_precise: frame0: regs= stack=-8 before 2: (b7) r2 = 0
mark_precise: frame0: regs= stack=-8 before 1: (7b) *(u64 *)(r10 -8) = r1
mark_precise: frame0: regs=r1 stack= before 0: (b7) r1 = 8
6: R2=8 R3=fp8
6: (b7) r0 = 0 ; R0=0
7: (95) exit |
| In the Linux kernel, the following vulnerability has been resolved:
ip_tunnel: adapt iptunnel_xmit_stats() to NETDEV_PCPU_STAT_DSTATS
Blamed commits forgot that vxlan/geneve use udp_tunnel[6]_xmit_skb() which
call iptunnel_xmit_stats().
iptunnel_xmit_stats() was assuming tunnels were only using
NETDEV_PCPU_STAT_TSTATS.
@syncp offset in pcpu_sw_netstats and pcpu_dstats is different.
32bit kernels would either have corruptions or freezes if the syncp
sequence was overwritten.
This patch also moves pcpu_stat_type closer to dev->{t,d}stats to avoid
a potential cache line miss since iptunnel_xmit_stats() needs to read it. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Mask the bd_cnt field in the TX BD properly
The bd_cnt field in the TX BD specifies the total number of BDs for
the TX packet. The bd_cnt field has 5 bits and the maximum number
supported is 32 with the value 0.
CONFIG_MAX_SKB_FRAGS can be modified and the total number of SKB
fragments can approach or exceed the maximum supported by the chip.
Add a macro to properly mask the bd_cnt field so that the value 32
will be properly masked and set to 0 in the bd_cnd field.
Without this patch, the out-of-range bd_cnt value will corrupt the
TX BD and may cause TX timeout.
The next patch will check for values exceeding 32. |
| league/commonmark versions >= 2.0.0 and < 2.8.4 (patched in 2.9.0) contain a denial of service vulnerability in UniqueSlugNormalizer::normalize(), which restarts its numeric-suffix search from 1 on every slug collision, resulting in O(K^2) time complexity for K headings that collapse to the same base slug. The vulnerable path is reached when HeadingPermalinkExtension, FootnoteExtension, or TableOfContentsExtension is registered. An unauthenticated attacker can force many headings onto a single base slug (e.g., via empty ATX headings, identical heading text, or punctuation-only headings) in a small Markdown document, consuming excessive CPU and denying service. |
| league/commonmark versions before 2.9.1 contain multiple denial of service vulnerabilities in fenced code block detection, reference link label lookup, and emphasis delimiter processing that perform super-linear work on crafted input. Attackers can submit specially crafted Markdown with long backtick runs, nested brackets, or delimiter sequences to consume disproportionate CPU time and prevent legitimate requests from completing. |
| The league/commonmark (thephpleague/commonmark) library in versions >= 1.5.0 and < 2.9.1 contains quadratic parsing complexity in its SmartPunctExtension and AttributesExtension. When either extension is explicitly registered on the Environment (they are not enabled by default and are excluded from the standard CommonMark and GitHub-Flavored Markdown converters), an unauthenticated attacker can submit small, specially crafted Markdown documents — such as text alternating with unpaired quotes, contiguous runs of block-level attribute blocks, or repeated class attributes — to trigger disproportionate CPU consumption and cause a denial of service. Fixed in 2.9.1. |
| A security flaw has been discovered in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. Affected by this issue is the function Upload::upload of the file ThinkPHP/Library/Think/Upload.class.php. Performing a manipulation results in unrestricted upload. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| Unauthenticated Denial of Service Attack in Migrate Guru – Site Migration & Cloning <= 6.65 versions. |
| Unauthenticated Cross Site Scripting (XSS) in RTMKit <= 2.1.5 versions. |
| Subscriber Privilege Escalation in WCFM Membership <= 2.11.11 versions. |
| The Contact Form by Supsystic plugin for WordPress is vulnerable to Stored Cross-Site Scripting via IP Address Header in all versions up to, and including, 1.10.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. An unauthenticated attacker can first call the 'updateNonce' action — which is accessible without authentication due to its absence from the plugin's permission list — to obtain a valid nonce, then submit a contact form with a malicious payload in a spoofed IP header such as X-Forwarded-For. |
| Tycon Systems TPDIN-Monitor-WEB3 versions 2.2.9 and prior are vulnerable to a cross-site request forgery vulnerability. This could allow an attacker to perform state changing operations on the device. |
| The Abandoned Cart Pro for WooCommerce plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 10.7.1. This is due to missing capability checks and nonce verification on multiple AJAX actions including wcap_save_connector_settings, wcap_send_manual_email, wcap_abandoned_cart_info, and wcap_change_manual_email_data. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify SMTP connector settings to route administrator recovery emails through an attacker-controlled server and intercept auto-login links to gain full administrative access. The plugin's auto-login feature must be enabled, which is the default configuration. |
| Unauthenticated Cross Site Scripting (XSS) in Under Construction <= 5.82 versions. |
| The W3 Total Cache plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via LazyLoad Background Mutator in all versions up to, and including, 2.10.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the "Lazy Load Images" feature with "Process background images" to be enabled, and the malicious comment to be approved by a moderator before execution is triggered. |
