Export limit exceeded: 386349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 386349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (386349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-85547 | 2026-09-04 | N/A | ||
| A cross-site request forgery (CSRF) vulnerability exists in MISP due to form-security and CSRF protections being disabled based on whether an incoming request was identified as a REST request. MISP's REST detection can be influenced by request properties such as the URL suffix or the HTTP Accept header. Because Accept: application/json can be supplied by a cross-origin page without requiring a CORS preflight, an attacker could cause a request originating from another website to be treated as REST traffic. MISP would consequently disable its normal form-security and CSRF validation even though the request was authenticated using the victim's existing browser session. An unauthenticated remote attacker could exploit this behavior by convincing an authenticated MISP user to visit or interact with a malicious web page. The attacker's page could then issue crafted requests to susceptible state-changing MISP endpoints using the victim's privileges. Depending on the permissions of the victim and the targeted endpoint, this could allow unauthorized modification, creation, publication, or removal of data and other state changes. The vulnerability originates from granting the form-security exemption based on _isRest() rather than on the authentication mechanism used by the request. The patch changes this behavior so that CSRF and form-security exemptions are granted only when the request actually carries a MISP API key. Session-authenticated REST-style requests remain subject to CSRF protection. The fix also introduces support for transmitting CSRF tokens through the X-CSRF-Token header for legitimate same-origin AJAX requests. Such a header cannot normally be attached by a cross-origin page without triggering a CORS preflight, preventing it from being used to reproduce the original attack. | ||||
| CVE-2026-84504 | 2026-09-04 | 8.1 High | ||
| fastify versions before 5.12.2 treat the object resolved by a successful Ajv async validator as the value result protocol used by custom validator compilers. If a request that passes its route schema contains a property named value at the root, fastify replaces the entire request body with that property's value before the handler runs, so the handler receives a different object than the one that satisfied the schema. An authenticated low-privilege caller can use this to make nested data replace the validated body and trigger an operation the route schema did not authorize, leading to unauthorized state changes and data disclosure. Users should upgrade to fastify 5.12.2 or later. | ||||
| CVE-2026-85541 | 2026-09-04 | 5.4 Medium | ||
| DreamMaker developed by Interinfo has a Reflected Cross-site Scripting vulnerability. Authenticated remote attackers can execute arbitrary JavaScript codes in user's browser via a malicious website. | ||||
| CVE-2026-85540 | 2026-09-04 | 8.8 High | ||
| DreamMaker developed by Interinfo has a SQL Injection vulnerability. Authenticated remote attackers can inject arbitrary SQL commands to read, modify, and delete database contents. | ||||
| CVE-2026-69657 | 2026-09-04 | N/A | ||
| XING CPTrans-ME-X contains a Use of Default Password (CWE-1393). Anyone with the knowledge of the credential may log in to the affected device. | ||||
| CVE-2026-85546 | 2026-09-04 | N/A | ||
| MISP contains a cross-site request forgery (CSRF) vulnerability in the sharing group quick-edit functionality. The addOrg, removeOrg, addServer, and removeServer actions share the __initialiseSGQuickEdit() helper, where the HTTP method validation intended to restrict these operations to POST requests was commented out. As a result, these state-changing actions could be invoked using GET requests. An attacker could craft a URL targeting one of the affected actions and cause an authenticated MISP user with sufficient privileges to request it, for example through a malicious link or embedded web resource. Successful exploitation could modify the membership of a MISP sharing group without the victim intentionally performing the operation. Depending on the action performed, an attacker could add or remove organisations or servers from a sharing group, potentially granting unintended access to information distributed through that sharing group or disrupting legitimate information sharing. The patch restores HTTP method enforcement centrally in __initialiseSGQuickEdit() by calling allowMethod(['post']), ensuring that all four affected quick-edit operations require POST requests and are therefore subject to the application's normal protections for state-changing requests. | ||||
| CVE-2026-27086 | 2026-09-04 | 6.5 Medium | ||
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Xtemos WoodMart allows DOM-Based XSS. This issue affects WoodMart: from n/a before 8.3.8. | ||||
| CVE-2026-85184 | 2026-09-04 | 9.1 Critical | ||
| @fastify/middie versions >= 9.1.0 and before 9.3.4 decide whether to run path-scoped middleware by matching against the raw request target, while the Fastify router resolves an absolute-form request target to its path before dispatching. Because the two layers evaluate different strings, a request using an absolute-form target reaches the route handler while the path-scoped middleware, such as authentication or authorization, is skipped. An unauthenticated network attacker can use this to bypass path-based access controls in a Fastify application that relies on middie for those controls. Users should upgrade to @fastify/middie 9.3.4 or later. | ||||
| CVE-2026-85538 | 2026-09-04 | N/A | ||
| An incorrect authorization vulnerability in MISP allowed authenticated users to delete attributes from events despite lacking the required perm_modify or perm_modify_org permissions. The affected attribute deletion paths relied on organization membership checks performed by MispAttribute::deleteAttribute() but did not consistently enforce MISP's event modification authorization rules. Consequently, a user belonging to the organization associated with an event could potentially delete individual attributes or perform bulk attribute deletion even when their assigned role was not authorized to modify the event. This created an inconsistency between attribute editing and deletion: editing an attribute correctly used MISP's ACL::canModifyEvent() authorization logic, whereas the affected deletion operations could bypass these permission checks. An authenticated attacker with access to an affected MISP instance and membership in the organization owning an event could exploit this flaw to remove attributes from that event, potentially causing unauthorized modification or loss of threat intelligence data. The patch introduces a common authorization check for all affected deletion paths. Before deletion, MISP now resolves the associated events and verifies that the current user is authorized to modify each event using the same authorization mechanism used by normal event and attribute modification operations. | ||||
| CVE-2026-81665 | 1 Redhat | 2 Enterprise Linux, Openshift | 2026-09-04 | 7.5 High |
| A heap-based buffer overflow was found in Corosync's Totem Process Group (totempg) message reassembly. When processing fragmented multicast messages, the buffer used to reassemble fragments lacks a runtime bounds check in release builds. A network-adjacent attacker able to send crafted multicast protocol messages to the cluster could cause a heap buffer overflow with attacker-controlled data. This can crash the Corosync daemon, causing a denial of service to the entire cluster, and may potentially allow further exploitation given sufficient heap-corruption control. | ||||
| CVE-2026-81302 | 2026-09-04 | N/A | ||
| PALLET CONTROL products contain an incorrect default permission vulnerability, which may allow a local attacker to execute arbitrary code with SYSTEM privileges on the affected product. | ||||
| CVE-2026-80732 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ata: pata_sl82c105: fix bridge revision use-after-free pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference. | ||||
| CVE-2026-80745 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: fp9931: Fix VPOS/VNEG voltage selector table The VPOSNEG_table[] mapping does not match the FP9931 datasheet. The datasheet defines the VPOS/VNEG voltage mapping as: 00h-04h -> 7.04V (-7.04V) 05h -> 7.26V (-7.26V) 06h -> 7.49V (-7.49V) ... 28h-3Fh -> 15.06V (-15.06V) However, VPOSNEG_table[] has two issues: 1. Selector 0x00~0x04 should all map to 7.04V (5 entries), but the table has 6 entries of 7.04V, causing all subsequent entries to be shifted by one position. 2. Selectors 0x29~0x3F should all clamp to 15.06V (23 entries), but the table has only 41 entries. Any selector value above 0x28 would result in an out-of-bounds table access. Fix both issues by removing the duplicate 7.04V entry and appending the missing 23 clamped 15.06V entries, bringing the table to the correct size of 64 entries (0x00~0x3F). | ||||
| CVE-2026-80754 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix F55 transmitter electrode count typo During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. | ||||
| CVE-2026-85533 | 2026-09-04 | N/A | ||
| An authorization flaw in MISP allowed an authenticated user to submit a sharing_group_id without verifying that the user was authorized to use the referenced Sharing Group. In several attribute and Galaxy Cluster creation and editing workflows, validation of the submitted Sharing Group was performed only when the request explicitly set the distribution field to 4 ("Sharing Group"). An attacker could therefore craft a request containing a sharing_group_id while omitting the distribution parameter, or otherwise avoiding the distribution == 4 condition, causing the Sharing Group authorization check to be skipped. This could allow a user with permission to create or modify the affected MISP objects to associate data with a Sharing Group that they are not authorized to use. Depending on the affected object's existing distribution settings and subsequent processing, this could bypass intended information-sharing boundaries and result in unauthorized placement or distribution of data to members of another Sharing Group. The issue affected attribute attachment and editing operations as well as Galaxy Cluster creation and editing. The fix ensures that authorization is performed whenever a non-empty sharing_group_id is submitted, independently of the distribution parameter. It also centralizes the authorization decision in SharingGroup::canUse() and explicitly rejects empty Sharing Group identifiers rather than allowing them to be interpreted as an unrestricted query. | ||||
| CVE-2026-27432 | 2026-09-04 | 5.4 Medium | ||
| Authorization Bypass Through User-Controlled Key vulnerability in sc Internet Vivoo WP Rentals allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects WP Rentals: from n/a before 3.16.0. | ||||
| CVE-2026-85528 | 2026-09-04 | 5.3 Medium | ||
| Improper input validation of the auto-configuration account identifier in Snowflake JDBC Driver versions 4.2.0 through 4.3.3 allowed a credential-bearing login request to be redirected to an attacker-selected HTTPS endpoint. An attacker able to control the account value could cause the driver to transmit a reusable login credential to a host of their choosing and replay it to obtain the privileges granted to that credential. Successful exploitation requires an application using jdbc:snowflake:auto with a connections.toml section that omits an explicit host and a lower-trust principal able to set the account value; ordinary JDBC URLs are unaffected. The fix is available in Snowflake JDBC Driver version 4.3.4. Users must manually upgrade. | ||||
| CVE-2026-80726 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-80734 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | ||||
| CVE-2026-80735 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: ensure socket is owned by ovpn before deref sk_user_data Some subsystems, like BPF SOCKMAP, set sk_user_data without actually setting the encap_type. For this reason, we must make sure that the type is the one ovpn expects before dereferencing sk_user_data. Failing to do so may lead to out-of-bounds reads. | ||||