Export limit exceeded: 394208 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394208 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53716 | 1 Envoyproxy | 1 Gateway | 2026-09-16 | 6.5 Medium |
| Envoy Gateway is an open source project for managing Envoy Proxy as a standalone or Kubernetes-based application gateway. Prior to 1.7.4 and 1.8.1, getFileFromGZ in internal/wasm/httpfetcher.go calls io.ReadAll on a gzip.Reader without limiting decompressed output when a tenant-controlled EnvoyExtensionPolicy.spec.wasm[].code.http.url points to a reachable compressed Wasm payload. The 256 MiB compressed-input cap does not constrain the expanded size, no operator Wasm URL allowlist exists, and the optional sha256 check occurs only after decompression, so a comparatively small gzip stream can force a multi-gigabyte allocation in the shared controller. The resulting out-of-memory termination restarts the controller, re-reconciles the persistent custom resource, and can create a persistent cross-tenant control-plane outage. This issue is fixed in versions 1.7.4 and 1.8.1. | ||||
| CVE-2026-52827 | 1 Kimai | 1 Kimai | 2026-09-16 | N/A |
| Kimai is an open-source time tracking application. Prior to 2.59.0, the KIMAI_SESSION cookie issued after password verification but before TOTP completion is accepted by every /api route because config/packages/security.yaml protects the API with IS_AUTHENTICATED and App\API\Authentication\ApiRequestMatcher routes an existing session through the main firewall. A Scheb TwoFactorToken satisfies that access rule, and App\Voter\ApiVoter grants API access to its User, allowing an attacker with a valid account password to use authenticated REST API operations without entering the second factor even though web routes remain blocked. This issue is fixed in version 2.59.0. | ||||
| CVE-2026-48737 | 1 Pyload | 1 Pyload | 2026-09-16 | 4.9 Medium |
| pyLoad is a free and open-source download manager written in Python. Prior to 0.5.0b3.dev101, is_global_address in src/pyload/core/utils/web/check.py relies on Python's global-address classification without examining IPv4 destinations embedded in 6to4 or NAT64 IPv6 addresses. A low-privileged user can submit an IPv6 literal through parse_urls to the pre-resolution is_global_host guard. Because host_to_ip is pinned to AF_INET, that guard does not evaluate a hostname's AAAA result. Separately, curl resolves hostnames before the pycurl PREREQFUNC in src/pyload/core/network/http/http_request.py applies the same vulnerable is_global_address check to the actual connection address, so a transition-form AAAA result can be permitted even when it terminates at an embedded loopback, private, CGNAT, or link-local IPv4 address. Exploitation requires the pyLoad host to route the applicable transition mechanism, including 6to4 on affected Python 3.9 through 3.11 deployments or NAT64 on a network with a NAT64 gateway. Successful exploitation can enable internal-network reconnaissance, timing-based confirmation, limited service disruption, or cloud metadata disclosure where the wrapped address is routable. This issue is fixed in version 0.5.0b3.dev101. | ||||
| CVE-2026-44163 | 2026-09-16 | 5.3 Medium | ||
| fluent-plugin-opentelemetry is a Fluentd input and output plugin for forwarding OpenTelemetry Protocol data. Prior to 0.5.3, the in_opentelemetry HTTP input read the entire incoming request body and decompressed payloads into memory without enforcing maximum size thresholds. When an OpenTelemetry ingestion endpoint was exposed to an untrusted network, an attacker could send an excessively large request or a highly compressed payload that expanded in memory. The resulting memory exhaustion could cause the operating system to terminate the Fluentd process, disrupting all log collection and forwarding on the affected node. This issue is fixed in version 0.5.3. | ||||
| CVE-2026-40857 | 1 Wnc | 1 T-mobile 5g Box Idu | 2026-09-16 | N/A |
| WNC T-Mobile 5G Box IDU router contains a cross-site request forgery (CSRF) vulnerability in the portal.cgi component. The anti-CSRF mechanism fails to validate the csrf_token_value parameter, accepting any arbitrary value as valid. This allows a remote attacker to perform unauthorized actions on the device by tricking an authenticated user into visiting a malicious website.This issue has been fixed in firmware version 1.1.0.651412 | ||||
| CVE-2026-40856 | 1 Wnc | 1 T-mobile 5g Box Idu | 2026-09-16 | N/A |
| WNC T-Mobile 5G Box IDU router is vulnerable to improper access control. The vulnerability exists in the wnc_maccheck.cgi endpoint, which is accessible without authentication. It allows a remote attacker to retrieve sensitive configuration data, including the administrator web password, WiFi passphrase, and technical device information.This issue has been fixed in firmware version 1.1.0.651412 | ||||
| CVE-2026-40855 | 1 Wnc | 1 T-mobile 5g Box Idu | 2026-09-16 | N/A |
| WNC T-Mobile 5G Box IDU router is vulnerable to a command injection. The vulnerability exists in the ping functionality within the /cgi-bin/portal.cgi endpoint, specifically affecting the ping_ip, ping_size, and ping_times POST parameters. The root cause is the failure to verify and sanitize user-supplied input before incorporating it into a system command. This allows an authenticated attacker to execute arbitrary commands on the shell and gain root access to the system.This issue has been fixed in firmware version 1.1.0.651412 | ||||
| CVE-2026-39038 | 2026-09-16 | 6.1 Medium | ||
| BharatMLStack up to and including v1.3.0 is vulnerable to Cross Site Scripting (XSS) in the component Trufflebox UI (trufflebox-ui) in GenericNumerixTable.jsx. | ||||
| CVE-2026-37152 | 1 Totolink | 1 X5000r | 2026-09-16 | 9.8 Critical |
| TOTOLINK X5000R V9.1.0cu.2415_B20250515 was discovered to contain a hardcoded password for root access. | ||||
| CVE-2026-25827 | 1 Keyfactor | 1 Signserver | 2026-09-16 | 2.3 Low |
| An issue was discovered in Keyfactor SignServer before 7.6.0. A number of properties were identified to not have any restrictions to what path they can be set to by an admin user. Setting these properties to specific file paths can reveal information to the client side. Three specific properties were identified: The property ATTRIBUTESFILE in PKCS11CryotoToken can be set to a readable but not an accepted (i.e., recognized with attributes) file. In this case an error is thrown, confirming the existence of the file. The property KEYSTOREPATH in KeyStoreCryptoToken can be set to a non-existing file that will return an error confirming to the client side that the file does not exist. The property TRUSTSTOREPATH in RenewalWorker can be set to any path (without any restrictions) by an admin user. In the case that the provided path points to an existing file, readable by the user running the application server, but is not a recognized PEM format, it returns this as an error to the client side, confirming the existences of the file. | ||||
| CVE-2026-0192 | 1 Google | 1 Android | 2026-09-16 | 6.7 Medium |
| In Bootloader, there is a possible escalation of privilege due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0165 | 1 Google | 1 Android | 2026-09-16 | 6.5 Medium |
| In several functions of the RTCP packet decoder, there is a possible out-of-bounds read due to a missing bounds check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is needed for exploitation. | ||||
| CVE-2026-0158 | 1 Google | 1 Android | 2026-09-16 | 4 Medium |
| In Camera, there is a possible unauthorized way to access photos due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0157 | 1 Google | 1 Android | 2026-09-16 | 4.3 Medium |
| In RtcpHeader::decodeRtcpHeader, there is a possible OOB read due to a missing bounds check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0156 | 1 Google | 1 Android | 2026-09-16 | 7.5 High |
| In checkSsrcCollisionOnRcv of RtpSession.cpp, there is a possible memory safety issue due to a missing null check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0155 | 1 Google | 1 Android | 2026-09-16 | 5.3 Medium |
| In ImsMediaBitReader::ReadByteBuffer, there is a possible OOB read due to a missing bounds check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0145 | 1 Google | 1 Android | 2026-09-16 | 4 Medium |
| In keymint, there is a possible Permission Bypass due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0144 | 1 Google | 1 Android | 2026-09-16 | 7.5 High |
| In writeAocCommand of AocAudioCodec.cpp, there is a possible memory safety issue due to a missing bounds check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0142 | 1 Google | 1 Android | 2026-09-16 | 4 Medium |
| In iavb_parse_key_data of avb_rsa.c, there is a possible out of bounds read due to improper input validation. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-0141 | 1 Google | 1 Android | 2026-09-16 | 5.3 Medium |
| In decodeAppPacket of RtcpAppPacket.cpp, there is a possible OOB read due to a missing bounds check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||