Export limit exceeded: 394986 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 394986 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394986 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90081 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong_wait() adds itself to m_waitq and then tests the port bit, and rds_poll() registers on rds_poll_waitq and then reads the generation. That is the store-buffering pattern described above waitqueue_active() in include/linux/wait.h - the updater can observe an empty wait queue while the waiter still observes the port as congested, and no wake-up is issued. rds_cong_wait() is an interruptible sleep with no timeout, so a sender blocked on a congested port stays blocked until the next congestion update from that peer arrives or a signal is delivered. A poll() waiter misses the map-updated notification the same way. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier, as rds_tcp_state_change() already does for the same pattern. | ||||
| CVE-2026-90080 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix NULL deref of af_xdp_zc_qidx on rep setup af_xdp_zc_qidx tracks receive queues using AF_XDP zero-copy and is allocated during PF/VF probe. Representors and other non-AF_XDP paths leave the pointer NULL, but several call sites used test_bit() on it unconditionally. Switching to devlink eswitch mode creates representors and runs otx2_init_hw_resources(), which reaches otx2_pool_aq_init() and oopses when dereferencing the NULL bitmap. Add NULL checks before every af_xdp_zc_qidx test_bit() use in the RSS, ethtool, XSK, and pool init paths. | ||||
| CVE-2026-90079 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix cn20k mailbox lifetime on repeated rvu_mbox_init() rvu_mbox_init() is called separately for AF-PF mailboxes during probe and for AF-VF mailboxes when SR-IOV is enabled. Each call used to allocate a new ng_rvu object, leaking the first allocation when the pointer was overwritten on the second call. Sharing one ng_rvu across both paths exposed several teardown bugs: the error path freed all cn20k mailbox DMA and kfree()d ng_rvu even when only the failing init type should be unwound, leaving live AF-PF mailbox memory in use after an AF-VF init failure. mutex_init() was also re-run on the AF-VF path while AF-PF mailbox handlers could still hold rvu->mbox_lock. Probe and SR-IOV failure paths did not release cn20k mailbox DMA either, since cleanup only happened in rvu_remove(). Allocate ng_rvu once with devm_kzalloc(), initialize mbox_lock in the same block, unwind only the mailbox memory for the failing init type, and free cn20k mailbox DMA from the probe and pci_enable_sriov() error paths. | ||||
| CVE-2026-90078 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: fix length calculations and avoid invalid header warnings syzbot reported a warning in skb_network_header_len() triggered by tcf_skbmod_act(): !skb_transport_header_was_set(skb) WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline] WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55 There are a few issues in tcf_skbmod_act(): 1. Calling skb_network_header_len() assumes skb->transport_header is set, which is not guaranteed when tcf_skbmod_act() runs at TC ingress. 2. Unconditionally calling skb_mac_header_len() at the beginning of tcf_skbmod_act() triggers a warning on L3 devices (e.g. TUN) where the MAC header is unset, evaluating to an underflowed garbage length. 3. On TC ingress, skb->data points to the network header. Adding the MAC header length to the IP header length causes skb_ensure_writable() to request more bytes than the actual IP packet length, dropping valid short packets (e.g. 28-byte UDP/IPv4 packets). Fix these by: - Using skb_network_offset(skb) + sizeof(struct iphdr/ipv6hdr) for SKBMOD_F_ECN so that the required length is correctly calculated on both ingress (offset == 0) and egress (offset == mac_len). - Setting max_edit_len to ETH_HLEN for Ethernet header modifications after validating ARPHRD_ETHER. | ||||
| CVE-2026-90077 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fix a resource leak in copy_net_ns() error handling path Currently, preinit_net() does two things: (1) call ns_common_init() which might fail (2) initialize resources which does not fail However, preinit_net() is returning early when (1) fails, and copy_net_ns() is jumping to the dec_ucounts: label. As a result, resources allocated by net_alloc() are leaking. We need to call key_remove_domain() and net_passive_dec() in order to release resources allocated by net_alloc(). We cannot simply jump to the put_userns: label when preinit_net() failed, for (2) is not yet done. But we can reorder (1) and (2), for there is no dependency between (1) and (2). Therefore, this patch decouples (1) from preinit_net() and changes preinit_net() back to a void function, and calls ns_common_init() after preinit_net() succeeded. Then, we can jump to immediately after ns_common_free() of the put_userns: label. | ||||
| CVE-2026-90076 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq: add overflow bounds to quantum and initial quantum fq_init() computes quantum = 2 * psched_mtu() and initial_quantum = 10 * psched_mtu() with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000; the 2 * and 10 * multiplications wrap to 0 in 32-bit arithmetic, so q->quantum == 0. Then in fq_dequeue() the credit-refill loop adds 0 to f->credit (which stays <= 0) and goto begin loops forever under the qdisc lock, creating a soft lockup. Clamp psched_mtu() to [1, 1 << 20] before multiplying so the product cannot wrap, then cap the result at 1 << 20, matching the bound already enforced on TCA_FQ_QUANTUM in fq_change(). Conditions to recreate the bug: a device whose MTU (plus hard_header_len) is large enough that 2 * psched_mtu() wraps (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90075 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_codel: clamp default quantum and mtu fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(), causing an infinite loop and soft lockup. Emulate fq_codel_change() and constrain to [256, FQ_CODEL_QUANTUM_MAX]. The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit below, and fq_codel_change() never updates it. codel_should_drop() tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and the default 32 MiB memory_limit, the test is always true, so CoDel is silently and completely disabled (no drops, no ECN). Declare a single clamped mtu and assign both q->quantum and q->cparams.mtu from it, which also removes the double psched_mtu() call. Conditions to recreate the bug: a device whose MTU (plus hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90074 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: clamp default quantum to avoid signed overflow fq_pie_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which overflows the signed flow->deficit to INT_MIN in fq_pie_qdisc_dequeue(), causing an infinite loop and soft lockup. Emulate fq_pie_policy which is already bounded to [1, 1 << 20]; clamp the default to [256, 1 << 20]. 256 matches fq_codel's floor and is a sane minimum for a DRR quantum. Conditions to recreate the bug: a device whose MTU (plus hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90073 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum before hhf_change() to avoid overflow hhf_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) with no overflow check. A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes weight * quantum overflow the signed deficit in hhf_dequeue(), spinning forever. Clamp q->quantum before hhf_change() so both the opt and !opt paths see a sane quantum. Without this, bare "tc qdisc add ... hhf" succeeds with a clamped quantum but "tc qdisc add ... hhf limit 1000" (any option present) fails with -EINVAL because hhf_change() re-validates the unclamped default (sch_hhf.c:559). 256 matches fq_codel's floor and is a sane minimum for a DRR quantum. Conditions to recreate the bug: a device whose MTU (plus hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90072 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sfq: clamp quantum to avoid signed overflow soft lockup sfq_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) (unsigned). A device with a huge MTU (e.g. dummy with max_mtu == 0 accepting MTU 2147483634) makes psched_mtu() return 0x80000000, so slot->allot = INT_MIN and INT_MIN + INT_MIN toggles between INT_MIN and 0 forever, spinning sfq_dequeue() under the qdisc lock. Clamp the quantum to [256, 1 << 20] so the refill loop terminates. The lower bound also covers q->quantum == 0 (psched_mtu() returning 0), which spins sfq_dequeue() identically. sfq_change() already rejects a negative quantum, so only the init path was exposed. Conditions to recreate the bug: a device whose MTU (plus hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy device with max_mtu == 0 accepting MTU 2147483634). Requires CAP_NET_ADMIN in a user namespace. | ||||
| CVE-2026-90071 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: restore skb->dev on the slave failure path teql_master_xmit() sets skb->dev = slave before calling the slave's ndo_start_xmit(), but never restores it when that transmit fails. The skb then walks on to the next slave still pointing at the previous one. If a later slave has no resolved neighbour, teql_resolve() hands the skb to neigh_event_send(), which queues it on that neighbour's arp_queue with the stale skb->dev. skb->dev holds no reference, so deleting the previous slave frees the net_device while the skb is still queued. Whatever runs next on that skb - arp_error_report() on timeout, or neigh_direct_output() -> dev_queue_xmit() once the neighbour resolves - causes a UAF like the one below: BUG: KASAN: slab-use-after-free in __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) Read of size 4 at addr ffff888106e100b0 by task flood_packet/527 CPU: 0 UID: 0 PID: 527 Comm: flood_packet Not tainted 7.2.0-rc6-g594d90519502 #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) ? __pfx__raw_spin_lock_irqsave (./include/asm-generic/qrwlock.h:122 (discriminator 4)) ? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) kasan_report (mm/kasan/report.c:595) ? __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) [...] ipv4_link_failure (net/ipv4/route.c:1251 net/ipv4/route.c:1258) ? __pfx_ipv4_link_failure (./include/linux/skbuff.h:4327) ? _raw_write_lock (./include/linux/instrumented.h:55 ./include/linux/atomic/atomic-instrumented.h:1301 ./include/asm-generic/qrwlock.h:98 ./include/linux/rwlock_api_smp.h:230 kernel/locking/spinlock.c:304) ? __pfx__raw_write_lock (kernel/locking/spinlock.c:175) arp_error_report (./include/net/dst.h:438 net/ipv4/arp.c:296) neigh_invalidate (net/core/neighbour.c:1077) neigh_timer_handler (net/core/neighbour.c:1169) [...] Allocated by task 505: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5334 mm/slub.c:6905) alloc_netdev_mqs (net/core/dev.c:12055 (discriminator 2)) rtnl_create_link (net/core/rtnetlink.c:3721) rtnl_newlink (net/core/rtnetlink.c:3903 net/core/rtnetlink.c:4044 net/core/rtnetlink.c:4159) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) [...] Freed by task 536: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6377 mm/slub.c:6692) device_release (drivers/base/core.c:2636) kobject_put (lib/kobject.c:689 lib/kobject.c:720 ./include/linux/kref.h:65 lib/kobject.c:737) netdev_run_todo (net/core/dev.c:11756) rtnl_dellink (net/core/rtnetlink.c:157 ./include/linux/rtnetlink.h:135 net/core/rtnetlink.c:3651) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) [...] Fix this by restoring skb->dev to the master at the end of each slave's iteration. | ||||
| CVE-2026-90070 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tpm: st33zp24: Return zero on status read failure st33zp24_status() ignores the result of the transport read and returns data even when no byte was received. The I2C transport, for example, skips i2c_master_recv() when the register-select write is short or fails, leaving data uninitialized. The resulting stack value can be interpreted as TPM_STS flags and let status checks complete spuriously. The status callback cannot propagate a transport error. Return zero unless recv() reports exactly one byte. With no status bits set, callers retry or take their existing timeout or error path instead of acting on an invalid status value. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-90069 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - allocate async request context when cloning ACOMP_REQUEST_ON_STACK() reserves only enough storage for the synchronous fallback. When an async implementation is selected, callers clone that stack request before retrying, but acomp_request_clone() currently copies only the stack-sized object. The clone therefore has no storage for the async provider request context, and providers such as QAT write past the allocation through acomp_request_ctx(). KASAN does report a slab OOB write. Allocate a zeroed clone large enough for the runtime acomp request size, copy only the bytes present in the source object, and preserve the existing fallback-on-allocation-failure behavior. Use the runtime reqsize because an implementation may adjust it during tfm initialization. | ||||
| CVE-2026-90068 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix off-by-one check on the second enum channel The snd_soc_dapm_put_enum_double() rejects item[0] once it reaches e->items, but it lets item[1] be equal to it. Both go on to snd_soc_enum_item_to_val(), which indexes e->values with no bound of its own, so an enum with a value table reads one element past the end. The indexing arrived with the MUX consolidation, which relaxed the item[1] check in the same hunk. The value MUX handler it deleted used >= there, and the snd_soc_put_enum_double() in soc-ops.c still does. Only adav80x pairs a value table with two shifts, and its second channel looks accidental, but the control does report two values. Writing three into it reads off the end of adav80x_mux_values. The core catches that only under CONFIG_SND_CTL_INPUT_VALIDATION, which defaults off. | ||||
| CVE-2026-90067 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810 net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070 ... Call Trace: <TASK> ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> According to the msgr2 protocol specification, the banner payload is expected to contain at least two 64-bit integers (`server_feat` and `server_req_feat`). Therefore, `payload_len` must be at least 16 bytes. Fix this by adding a check in `process_banner_prefix()` to reject a `payload_len` smaller than 16 bytes. This prevents the 0-length read and correctly aborts the connection with a protocol error. | ||||
| CVE-2026-90066 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify ftrace_direct_multi_init() assigns kthread_run()'s return value to simple_tsk without an IS_ERR() check. When kthread_run() fails it returns ERR_PTR(-ENOMEM), but init still returns 0, so the module loads with simple_tsk holding an error pointer. On unload, ftrace_direct_multi_exit() then passes that ERR_PTR to kthread_stop(), leading to a null-pointer-dereference. Check the return value of kthread_run() with IS_ERR(); on failure, unregister the ftrace direct call and propagate the error code. | ||||
| CVE-2026-90065 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: release the internal TCP sock on IPPROTO_SMC socket creation failure IPPROTO_SMC sockets create an internal TCP sock ("clcsock") from the proto->init hook. When socket creation fails after proto->init has run - e.g. a cgroup BPF program attached to BPF_CGROUP_INET_SOCK_CREATE denies the socket - sk_common_release() only invokes sk_prot->destroy if it is set, but neither smc_inet_prot nor smc_inet6_prot defines it, and smc_destruct() returns early unless sk_state is SMC_CLOSED. As a result, every failing socket(AF_INET, SOCK_STREAM, IPPROTO_SMC) call leaks one tcp_sock, so an unprivileged task able to attach a deny-all BPF_CGROUP_INET_SOCK_CREATE program to its own cgroup can grow kernel memory unboundedly. Add a .destroy hook to both protos that releases the clcsock via smc_clcsock_release(). smc_sk_init() hashes the sock into the smc hashinfo before the clcsock is created, and smc_diag dumps walk that hash dereferencing smc->clcsock without taking clcsock_release_lock, while sk_common_release() calls .destroy before .unhash. Unhash the sock before releasing the clcsock, as __smc_release() does, so a concurrent dump cannot observe the release; the second unhash in sk_common_release() is a no-op. | ||||
| CVE-2026-90064 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Reject page faults from non-fault-mode scratch VMs Having scratch enabled does not make a VM capable of handling recoverable page faults. Allowing scratch VMs through the ASID lookup also admits dma-fence mode VMs. If such a VM faults on an already valid VMA, the handler reports success without fixing the fault, causing the GPU to retry indefinitely. Only allow fault-mode VMs through the ASID lookup. Fault-mode VMs using scratch remain supported, while faults from 3D VMs are rejected. (cherry picked from commit bfb24a06405b652d37831f3fb66b71d33a6605de) | ||||
| CVE-2026-90063 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: Ensure that TCP packets don't overflow gso_segs The user can specify any gso_size in a packet crafted with an AF_PACKET PACKET_VNET_HDR socket, even smaller than TCP_MIN_GSO_SIZE = 8. At the same time, GSO_MAX_SIZE = 8 * GSO_MAX_SEGS = 8 * 65535. When the user crafts a packet with gso_size < 8, there is a risk for partial GSO to overflow the 16-bit gso_segs field when dividing the SKB length by gso_size. Adjust gso_size of TCP packets to be at least TCP_MIN_GSO_SIZE = 8. Keep gso_size of UDP GSO packets, as gso_size=1 is valid and explicitly tested at tools/testing/selftests/net/tun.c:649. | ||||
| CVE-2026-90062 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: move hardware offload step after building the chain blob Allocate the chain blob before the ruleset offload to reduce chances of entering an inconsistent state where the offloaded ruleset in the nic and the software ruleset differ. | ||||