Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98547 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: fix integer overflow in prb_calc_retire_blk_tmo() prb_calc_retire_blk_tmo() computes in 32-bit int arithmetic: mbits = (blk_size_in_bytes * 8) / (1024 * 1024); If I'm reading the validation right, tp_block_size is user controlled and packet_set_ring() only rejects values that are <= 0 as int or not page aligned, so a 256MiB block goes right through (and alloc_one_pg_vec_page() even has a vzalloc fallback for it). 0x10000000 * 8 wraps to INT_MIN, and on a NIC reporting 1 Gbps (div == 1) the function ends up returning -2047. The condition is actually (8 * size) mod 2^32 >= 2^31 && div == 1, so the trigger set is [256,512), [768,1024), [1280,1536) and [1792,2048) MiB. Other sizes wrap to non-negative values and faster links divide the unsigned value back below 2^31, which is why this doesn't blow up for everyone. What makes it fatal is what happens next in init_prb_bdqc(): p1->interval_ktime = ms_to_ktime(prb_calc_retire_blk_tmo(...)); hrtimer_start(&p1->retire_blk_timer, p1->interval_ktime, HRTIMER_MODE_REL_SOFT); A negative relative timeout expires immediately. The callback unconditionally returns HRTIMER_RESTART, and hrtimer_forward() turns the negative interval into hrtimer_resolution: if (interval < hrtimer_resolution) interval = hrtimer_resolution; So the SOFT timer re-fires at the maximum rate forever, holding sk_receive_queue.lock each pass. One CPU spins in softirq until the socket is closed. Repeat with more rings and the machine is gone. The overflow itself is ancient - it was introduced together with TPACKET_V3 in f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation."). Its effect prior to f7460d2989fa ("net: af_packet: Use hrtimer to do the retire operation", v6.18) was not as clear-cut, though: the return value was stored into an unsigned short retire_blk_tov, so a negative result was truncated, and a 0-jiffy delay loop could be programmed as well. Neither is nearly as detrimental as the immediate maximum-rate spin the hrtimer conversion turned it into. (Unrelated to CVE-2019-20812 - that one was the ethtool failure path returning 0, which now returns DEFAULT_PRB_RETIRE_TOV.) Reproducer, needs CAP_NET_RAW (a --network host container has it by default) and a 1 Gbps NIC (QEMU e1000 works): int fd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); bind(fd, ...); int v = TPACKET_V3; setsockopt(fd, SOL_PACKET, PACKET_VERSION, &v, sizeof(v)); struct tpacket_req3 req = { .tp_block_size = 0x10000000, .tp_block_nr = 1, .tp_frame_size = 2048, .tp_frame_nr = 0x10000000 / 2048, .tp_retire_blk_tov = 0, }; setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &req, sizeof(req)); Compute in 64 bits instead. The operands are already bounded by the existing validation, so nothing else changes. If you'd prefer a different fix, just say so and I'll respin. | ||||
| CVE-2026-98548 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sctp: discard the rest of the packet on a stale-cookie error When an association is in COOKIE-ECHOED state and the peer sends a bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary addresses, processing the ERROR chunk takes the non-fatal stale-cookie retry path sctp_sf_do_5_2_6_stale(), which queues SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive. sctp_cmd_del_non_primary() removes every non-primary transport - including the very transport this packet arrived on, which is still referenced by the receive lookup and shared by all chunks of the packet via chunk->transport. sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from the removed transport, but right afterwards the bundled DATA chunk makes sctp_assoc_bh_rcv() re-register asoc->peer.last_data_from = chunk->transport unconditionally, undoing the redirection with the just-removed transport. Once the packet is done, the receive reference is dropped and the transport is RCU-freed, while the surviving association keeps the dangling last_data_from. A later FWD-TSN (or the delayed SACK timer) makes sctp_gen_sack() dereference it (->param_flags and friends), and sctp_make_sack()/sctp_outq_select_transport() may write to the freed object and link it into the live transport list. This is a use-after-free triggerable by any malicious SCTP peer (or a local unprivileged user acting as one) with no capabilities required: BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660 Read of size 4 at addr ffff88800e1e356c by task poc/115 Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <- sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv Allocated: sctp_transport_new <- sctp_assoc_add_peer <- sctp_process_init (INIT-ACK processing) Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core (call_rcu queued by sctp_transport_put at end of sctp_rcv) The buggy address is located 364 bytes inside of freed 1024-byte region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport was removed") only covers the window between the receive lookup and the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog); here the transport is removed *while* the packet is being processed, by an earlier chunk of the same packet, so the drop in sctp_inq_push() does not reach this path. Verified with the bundled [ERROR(Stale Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still fires with that commit applied, and is gone with this patch on top. Fix it by discarding the rest of the packet on this path, as suggested by Xin. After the stale-cookie ERROR has sent the association back to COOKIE-WAIT and removed the non-primary transports, the remaining chunks of the packet can only run against the restarted handshake while referencing the removed arrival transport through chunk->transport: besides the last_data_from registration above, sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also copy that pointer into association-lifetime state that sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit them, in line with what sctp_inq_push() does for chunks whose transport was removed before processing. | ||||
| CVE-2026-98549 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: prevent collapsing skbs across boundary in rtx queue tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition. | ||||
| CVE-2026-98550 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: reject invalid and unexpected GRP_ACK_MSG to prevent bc_ackers underflow Commit 48a5fe38772b ("tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG") rejected duplicate/stale ACKs in tipc_group_proto_rcv() by returning early when less_eq(acked, m->bc_acked). However, that check remains incomplete in two ways: 1. When grp->bc_ackers is zero (e.g. on a quiet group, when replicast ACKs were not requested, or after all expected members have already acknowledged), an unexpected GRP_ACK_MSG with acked > m->bc_acked passes less_eq() and unconditionally decrements grp->bc_ackers. Because bc_ackers is a u16, this wraps to 65535, causing tipc_group_bc_cong() to permanently report congestion and blocking all future group broadcasts on the socket. 2. During an active broadcast round (grp->bc_ackers > 0), the sender transmits packet S and advances grp->bc_snd_nxt to S + 1. Receivers increment their expected counter to S + 1 upon consuming packet S, so the only valid ACK value for the current round is strictly acked == grp->bc_snd_nxt. However, tipc_group_update_bc_members() initializes each member's m->bc_acked to prev = grp->bc_snd_nxt - 1 (S - 1 before increment). This leaves a 2-sequence gap (S - 1 to S + 1) in sequence space. An incoming ACK is therefore neither rejected as duplicate nor prevented from decrementing grp->bc_ackers if an unexpected or stale value (such as S) is received. A member sending acked = S followed by acked = S + 1 could decrement grp->bc_ackers twice in the same round, prematurely clearing bc_ackers or underflowing it. Fix this by: - Dropping GRP_ACK_MSG immediately if grp->bc_ackers is zero. - Requiring acked == grp->bc_snd_nxt and rejecting duplicates where m->bc_acked == acked. Because replicast broadcast rounds are strictly sequential, only grp->bc_snd_nxt can be acknowledged, and each member can acknowledge at most once per round. Note that a related pre-existing issue in tipc_group_delete_member() (where grp->bc_ackers decrementing to zero upon member departure does not restore *grp->open or trigger a socket wakeup) will be addressed in a separate patch. | ||||
| CVE-2026-98552 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix a refcount leak in attach_perf_ctx_data() The attach_perf_ctx_data() can race on global and !global cases. The global case is protected by global_ctx_data_rwsem and shares a single reference count using perf_ctx_data.global field. But when it races with !global case, it may miss to set the global field and result in a reference count leak. CPU1 CPU2 ---------------------------------------------------------------- attach_task_ctx_data(.global=1) attach_task_ctx_data(.global=0) cd1 = alloc_perf_ctx_data(); cd2 = alloc_perf_ctx_data(); // { .global = 0, .refcount = 1 }; try_cmpxchg(); // success, // task->perf_ctx_data = cd2 try_cmpxhg(); // fail; old = cd2 refcount_inc_not_zero(&old->refcount); // success // old.refcount = 2 free_perf_ctx_data(cd1); Then later detach_global_ctx_data() will see the data but it's not marked as global, so it won't call detach_task_ctx_data(). | ||||
| CVE-2026-98553 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: autofs: fix sbi->pipe file reference leak in autofs_kill_sb() When autofs_fill_super() fails before clearing AUTOFS_SBI_CATATONIC (for example, when find_get_pid() fails on an invalid pgrp mount option, or when an fs_context is closed before mounting), deactivate_locked_super() invokes autofs_kill_sb() -> autofs_catatonic_mode(sbi). Because AUTOFS_SBI_CATATONIC is still set in sbi->flags, autofs_catatonic_mode() returns early without calling fput(sbi->pipe), permanently leaking the pipe struct file reference. Explicitly release sbi->pipe in autofs_kill_sb() if it is still non-NULL after autofs_catatonic_mode(). | ||||
| CVE-2026-98561 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfp: hold IPsec RX state under the XArray lock nfp_net_ipsec_rx() drops the XArray lock before taking a reference to the xfrm_state it found. The delete path can erase the entry and drop the last state reference in that interval. RX can then try to increment a zero refcount after the state has been queued for destruction. The driver queues firmware invalidation asynchronously; the delete path does not wait for the command to complete or drain pending RX processing. The XFRM garbage collector waits for an RCU grace period before freeing the state. That delays reclamation but does not make acquiring a reference from zero valid. Take the xfrm_state reference before releasing the XArray lock so xa_erase() cannot run between lookup and reference acquisition. | ||||
| CVE-2026-98565 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621 The core and io supplies are only requested for ID_MT7530: both the devm_regulator_get() in probe and the regulator_enable() in mt7530_setup() are guarded by the switch id, but mt7530_remove() disables them unconditionally. On an MT7621 or an MT7531 both pointers are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls regulator_disable() on NULL. | ||||
| CVE-2026-98635 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: block: Fix zones_cond out-of-bounds write on zone report blk_revalidate_disk_zones() sizes the zones_cond array from the disk capacity and zone size, but the index used by blk_revalidate_zone_cond() comes from the device-driven report_zones() walk and is never checked against the array size. A device reporting more zones than fit the array makes blk_zone_set_cond() write out of bounds. One way to reach this is a zone count exceeding 32 bits: both blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 + 1024 zones of one 512-byte logical block) gets its zone count truncated to a small value, undersizing the array while the report walk keeps counting upward. Check the index against the array size before storing the zone condition, and refuse to revalidate when the zone count does not fit 32 bits. | ||||
| CVE-2026-98636 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: squashfs: Add dictionary size range check to prevent shift-out-of-bounds When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size is 0) is mounted, and performs shift operations using dictionarysize, the shift exponent is -1, causing a shift-out-of-bounds. Detail as below: squashfs_comp_opts(msblk, buffer, length) squashfs_xz_comp_opts() if (comp_opts) n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1 if (opts->dict_size != (1 << n) && opts->dict_size != (1 << n) + (1 << (n + 1))) <----shift-out-of-bounds Fix it by adding a dictionary size range check before the shift operation. | ||||
| CVE-2026-98637 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE, which is left set. Later vCPUs on that VM then skip the SVE setup and register with a NULL sve_state, which the guest's first FP access hands to sve_load_state(). Return the error without touching vcpu_features. | ||||
| CVE-2026-98638 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve() pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl() and the WARN_ON() there, which is fatal at EL2. The existing !sve_state_size test rejects such a length, but only after the macro has run. Check sve_vl_valid() before deriving the state size. A valid length cannot yield a zero size, so the !sve_state_size test goes with it. | ||||
| CVE-2024-4457 | 1 Wso2 | 7 Wso2 Api Manager, Wso2 Carbon User Manager Kernel, Wso2 Enterprise Integrator and 4 more | 2026-10-18 | N/A |
| The Management Console fails to properly validate input related to the configuration of JDBC user stores. This weakness allows an attacker to supply specially crafted input that can lead to the execution of arbitrary code on the affected server. Successful exploitation of this vulnerability enables an attacker to execute arbitrary code on the server with the privileges of the WSO2 product. This could lead to a full compromise of the system. | ||||
| CVE-2026-98572 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix immediate JMP JEQ/JNE on MIPS32 An addu instruction was emitted instead of addiu, causing the immediate value 1 to be interpreted as register $at. This made the comparison result invalid when the immediate operand was negative. Note that $at is mapped to BPF_REG_AX, which is used for constant blinding. Fix the instruction to use the immediate form. Found with test_bpf on MIPS32r1 emulated by QEMU. | ||||
| CVE-2026-98574 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: stop Tx NAPI before disabling the queues bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend() both disable the Tx queues first and stop Tx NAPI several steps later. A completion in flight calls netif_tx_wake_queue() in between, and nothing stops the queue again, so a transmit can reach the rings after they have been freed. Close is safe because dev_deactivate_many() stops the qdisc first. bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both paths. KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend freezes user space before the callback runs: BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258 Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14 bcmgenet_xmit+0x17f8/0x2258 dev_hard_start_xmit+0x13c/0x588 sch_direct_xmit+0x108/0x340 __dev_queue_xmit+0x1190/0x3848 | ||||
| CVE-2026-98575 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid() frame->ccid.datalen is read directly from the USB response frame and used, unchecked, as an index into frame->data[]. A malicious or malfunctioning device can set this field to an arbitrary value, causing the driver to read far outside the received buffer. Bound ccid.datalen against the maximum possible ACR122 frame size before using it. This replaces the existing datalen == 0 check, since datalen < 2 already covers that case and additionally rejects datalen == 1, which would still underflow the "datalen - 2" offset used below. | ||||
| CVE-2026-98578 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ISO15693 inventory length The ISO15693 inventory helper removes a two-byte prefix without checking that it exists, then accepts a one-byte remainder before reading data[1] as the DSFID. Require the prefix and at least two remaining bytes before copying the UID data and reading the DSFID. | ||||
| CVE-2026-98580 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix race condition in accept_queue lifecycle In nfc_llcp_socket_release(), sockets and listener accept queues are walked under the local sockets rwlock and bh_lock_sock(). However, bh_lock_sock() does not synchronise against process-context lock_sock() held by nfc_llcp_accept_dequeue() during accept(). Because socket_release() does not check sock_owned_by_user(), both paths can concurrently unlink and release the same child socket, resulting in use-after-free or a NULL pointer dereference of child->parent in nfc_llcp_accept_unlink(). Fix this synchronisation race by having nfc_llcp_socket_release() use process-context lock_sock() instead of bh_lock_sock(): 1. Pop sockets from the local sockets list under the write lock using nfc_llcp_sock_list_pop() so lock_sock() can be acquired without holding the rwlock. 2. Because lock_sock() can sleep, defer the final release of the nfc_llcp_local structure to a workqueue (release_work). This avoids a sleeping-in-atomic bug when the last local reference is dropped from softirq context. Additionally, hold a single device reference on local from registration until final destruction. 3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent resurrecting a local object whose teardown has been scheduled. 4. In llcp_sock_accept(), verify that the listener socket state is still LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if the listener is closed concurrently. 5. When unlinking unaccepted child sockets during listener release, unlink them from local->sockets, call sock_orphan(), and drop their initial sk_alloc creation reference via sock_put(). 6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with a NULL check. | ||||
| CVE-2026-98583 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: validate helper command length before pull The firmware download receive path removes the NCI data header and reads the helper command before validating the remaining packet length. A short frame can therefore reach the data access before the malformed packet is rejected. Validate the complete helper command length before stripping the NCI data header. | ||||
| CVE-2026-98585 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Avoid rounding zero ring sizes roundup_pow_of_two() is undefined for zero. ethtool permits a zero ring size to reach the driver, where the minimum-size check should reject it. Leave zero unchanged while rounding nonzero ring sizes. The minimum-size check then rejects zero deterministically without changing the established behavior for other values. | ||||