Export limit exceeded: 394986 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394986 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90300 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Clear buf on error in __bpf_get_task_stack Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM argument and we should initialize the buf on every return path. Adding missing buf memset for __bpf_get_task_stack fail paths. This provides deterministic buffer contents, which is useful when the buffer is used directly as a map key. | ||||
| CVE-2026-90299 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix sleepable check for tracing/lsm prog When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog is allowed to attach to '__x64_'-alike prefix symbols. It is because the verifier does not verify whether the symbol is a kernel function or a bpf prog. That said, a sleepable tracing prog is allowed to attach to a bpf prog target whose name has '__x64_'-alike prefix. For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP prog, and copies buffer from a user pointer with bpf_copy_from_user() helper. After attaching the XDP prog to lo interface, the kernel BUG could be triggered by 'ping -c 1 -W 1 127.0.0.1': [ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324 Fix it by disallowing sleepable prog always when its target btf is not a kernel's btf. | ||||
| CVE-2026-90298 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: tcon: Drop TCON TOP device reference of_find_device_by_node() takes a device reference. Drop it after mux configuration succeeds. | ||||
| CVE-2026-90297 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: crtc: Propagate layer initialization error sun4i_crtc_init() returns plain NULL when layer initialization fails, while all its other error paths return an error pointer. The only caller, sun4i_tcon_bind(), checks the result with IS_ERR() and happily continues with tcon->crtc set to NULL. sun4i_rgb_init() and sun4i_lvds_init() then dereference it in drm_crtc_mask(), which oopses. Return the error pointer instead. | ||||
| CVE-2026-90296 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: imx6q: fix devres accumulation across driver rebind imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev is the CPU device from get_cpu_device(0). That device is never unbound, so its devres list is never released, and imx6q_cpufreq_remove() does not free the array either. Every probe therefore adds an allocation that stays for the lifetime of the system. Allocate against the platform device instead. Its devres is released when the driver is unbound, which is exactly the lifetime the array wants: imx6q_set_target() reads it, and nothing may reach that after cpufreq_unregister_driver(). That makes the array actually go away on unbind, so also clear the file-scope pointer in remove and on the failed-probe path, rather than leave it pointing at memory devres is about to release. Tested by rebinding the driver on qemu's mcimx6ul-evk. | ||||
| CVE-2026-90295 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: imx6q: fix out-of-bounds write when probed more than once imx6_soc_volt is allocated fresh on every probe, sized to the number of ARM OPPs: imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt), GFP_KERNEL); but it is filled through soc_opp_count, which has static storage and is never reset. A second bind after an unbind keeps indexing from where the first one stopped, and writes past the end of the new array. Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN: BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34 Write of size 4 at addr c5e90480 by task binder/73 imx6q_cpufreq_probe from platform_probe+0x88/0xe4 platform_probe from really_probe+0x108/0x384 bind_store from kernfs_fop_write_iter+0x1b4/0x28c The write lands one u32 past the end of the allocation. soc_opp_count is only read a few lines below the loop that fills it, so it never needed static storage. Make it a local. | ||||
| CVE-2026-90294 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tx() puts the final Login Response on the wire before __transport_register_session(), which iscsi_post_login_handler() reaches only after iscsi_target_do_login() returns. An initiator that issues a SCSI command as soon as it sees that response can have it executed against an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses on the NULL dereference. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ib-comp-wq ib_cq_poll_work RIP: 0010:target_submit+0xbe/0x390 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00 RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363 RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078 RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52 R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000 R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044 FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __pfx__raw_spin_lock_bh+0x10/0x10 ? __pfx_target_submit+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? iscsit_execute_cmd+0x650/0x850 iscsit_sequence_cmd+0x186/0x3d0 iscsit_process_scsi_cmd+0x87/0x300 isert_recv_done+0x1002/0x2390 ? __pfx_isert_recv_done+0x10/0x10 ? rxe_poll_cq+0x253/0x3d0 ? finish_task_switch.isra.0+0x1dc/0xa70 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Delay the final Login Response instead. isert_get_rx_pdu() runs from iscsi_target_rx_thread() after conn->rx_login_comp, completed by iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP and cxgbit already take PDUs from that thread, isert alone does not. The buffers are still posted first, so the initiator's first command does not meet an empty receive queue and nothing depends on RNR flow control, and the header and payload live in isert_conn, not in the struct iscsi_login that iscsi_target_nego_release() frees first. Over rxe, 400 login cycles per run, the oops appeared in 10 of 20 unpatched runs and in none of 20 runs with this patch. An initiator that never waits is handled by the next patch. Not tested: iWARP, discovery sessions over iSER, and real HCAs. | ||||
| CVE-2026-90293 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: post the full-feature receive buffers after session registration isert_put_login_tx() posts the full-feature receive buffers before __transport_register_session() runs, so an initiator that does not wait for the final Login Response can still have a SCSI command executed against an se_session whose se_tpg is NULL - the same oops as the previous patch, at target_submit+0xbe. Post them from isert_get_rx_pdu(), which the previous patch already uses to send that response, and post them before that send: the receive queue is filled at the moment the initiator is told it may use it. Allocating there keeps the existing property that a memory allocation failure cannot happen once the final Login Response is on the wire. The receive queue is already empty between the final Login Request and isert_post_recvm(); this moves the second point later, from a median of 92 us to 172 us over 1200 logins. Only an initiator that sends before it has been told to can reach that window, and on IB and RoCE its send is retried there until the buffers appear - isert_rdma_accept() asks for rnr_retry_count = 7. iWARP has no RNR flow control, so there the same send terminates the connection instead. Measured over rxe, 400 login cycles per run, with an initiator that does not wait: an instrumented build counted no entries to isert_recv_done() before the buffers are posted in 10 runs, where that initiator oopsed 8 of 10 unpatched runs and 5 of 10 with only the previous patch. Not tested: iWARP, discovery sessions over iSER, and real HCAs. | ||||
| CVE-2026-90292 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix use-after-free in siw_accept() siw_accept() looks up the QP supplied by userspace. If that QP is already in RTS, the function jumps to error cleanup before associating the incoming CEP with it. The cleanup tests whether qp->cep is non-NULL and assumes the current call installed the association. However, qp->cep can point to the CEP of an existing connection. The cleanup then drops a reference from the incoming cep, not qp->cep. Once the incoming endpoint loses its remaining references, this can free it before the subsequent cep->qp store, causing a use-after-free. It also clears the existing QP association. Only release the association reference when qp->cep is the incoming CEP. This preserves an existing association and avoids accessing the freed endpoint. | ||||
| CVE-2026-90291 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: module/dups: Fix use-after-free in kmod_dup_req lifetime handling The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed only after it is no longer referenced. When releasing an instance, the kmod_dup_request_delete() function removes the kmod_dup_req from the dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it. However, this doesn't work correctly because parallel users referencing the instance in kmod_dup_request_exists_wait() don't enter an RCU read-side critical section. This can result in a use-after-free. The kmod_dup_request_exists_wait() function may need to hold a valid reference to a kmod_dup_req instance across a blocking wait until the corresponding modprobe command completes. This makes it unsuitable for RCU. Fix the issue by changing the lifecycle management of kmod_dup_req to use reference counting. | ||||
| CVE-2026-90290 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Restore DAIF state on error Sashiko AI has reported that if swsusp_mte_save_tags() for some reason fails we return from swsusp_arch_suspend() with DAIF being masked - that is not what we'd expect. Restore the saved DAIF state before returning from the error path. | ||||
| CVE-2026-90289 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Resize MST HDCP per-connector arrays to 32 AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of 32 connectors. But the way it's used is like MAX_DISPLAY_COUNT. Hence we're off by one with DRM core, which supports a max of 32 connectors. Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT to match its actual use, and increase the size to 32 to match the originally intended size. | ||||
| CVE-2026-90288 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure for_each_child_of_node_scoped() releases the node reference on scope exit, so the explicit of_node_put(np) in the devm_phy_create() error path drops it twice. Drop the redundant of_node_put() and let the scoped cleanup handle it. | ||||
| CVE-2026-90287 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: sunplus: fix error handling in sp_uphy_init() Fix the error paths of sp_uphy_init() to undo exactly what each stage did: return directly if clk_prepare_enable() fails, release only the clock if reset_control_deassert() fails, and jump to err_reset if update_disc_vol() fails so the clock and reset are not leaked. | ||||
| CVE-2026-90286 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: Use PFP on the compute queues too On GFX6, the compute rings use the same CP path as the graphics ring. The only difference is that they don't support draw commands. (As opposed to GFX7 and newer which have a separate command parser that is called MEC for compute queues.) This means that we have to take into consideration that the PFP also exists on compute queues on GFX6: Use PFP for register writes on both graphics and compute queues. In the pipeline sync, use the PFP to wait for the previous fence (and not the ME) to prevent the PFP from starting to execute the next submission while the ME is still in the previous submission. After a VM flush, emit PFP_SYNC_ME on compute queues as well. | ||||
| CVE-2026-90285 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time after releasing optrom_mutex. The repeated read is redundant and, unlike the first, runs without optrom_mutex held, exposing flash access to concurrent optrom operations. Drop the duplicate call. | ||||
| CVE-2026-90284 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: do not queue completed sysfs fallback requests fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to pending_fw_head. device_add() publishes the fallback loading interface, so a userspace helper which discovers the device by scanning sysfs can write 0 to the loading attribute and complete the request before it is queued as pending. In that interleaving firmware_loading_store() calls fw_state_done() while pending_list still points to itself, so it cannot remove an entry from pending_fw_head. The subsequent unconditional list_add() then queues an already-completed fw_priv. Once the request is released, pending_fw_head can retain a pointer to freed memory and the next fallback request can fault while validating the list. Only in-flight fallback requests need suspend or reboot abort handling. If the request is already DONE after device_add(), return success from the fallback path without sending another uevent, waiting again, or queueing it as pending. This preserves the invariant that pending_fw_head contains only active fallback requests. | ||||
| CVE-2026-90283 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: release subpool on fill_super failure hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size mount options are specified. hugepage_new_subpool() may also reserve huge pages for min_size. If root dentry creation fails after the subpool is created, the failure path frees the subpool with kfree(). This bypasses hugepage_put_subpool() and can leave min_size reservations charged. Use hugepage_put_subpool() on the failure path, matching the normal put_super path. | ||||
| CVE-2026-90282 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relying on the possibly uninitialized phy pointer. | ||||
| CVE-2026-90281 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend Runtime PM must be enabled before creating the PHY, since phy_create() only enables runtime PM on the PHY device if it is already enabled on this parent device. However, the runtime PM callbacks dereference the hsphy instance, which is not yet ready, leaving a window where a suspend callback may trigger a NULL pointer dereference. Take a runtime PM usage reference with pm_runtime_get_noresume() before enabling runtime PM and release it once the PHY has been created, so that no runtime suspend can run before the PHY is ready. This also prevents a short window where an unnecessary runtime suspend can occur. Use the devres-managed version to ensure PM runtime is symmetrically disabled during driver removal for proper cleanup. | ||||