Export limit exceeded: 25326 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25326 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-15051 | 2 Ibm, Linux | 2 Qradar Security Information And Event Manager, Linux Kernel | 2026-03-25 | 5.4 Medium |
| IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality. | ||||
| CVE-2025-13995 | 2 Ibm, Linux | 2 Qradar Security Information And Event Manager, Linux Kernel | 2026-03-25 | 5 Medium |
| IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 could allow an attacker with access to one tenant to access hostname data from another tenant's account. | ||||
| CVE-2025-36051 | 2 Ibm, Linux | 2 Qradar Security Information And Event Manager, Linux Kernel | 2026-03-25 | 6.2 Medium |
| IBM QRadar SIEM 7.5.0 through 7.5.0 Update Package 14 stores potentially sensitive information in configuration files that could be read by a local user. | ||||
| CVE-2025-71203 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Sanitize syscall table indexing under speculation The syscall number is a user-controlled value used to index into the syscall table. Use array_index_nospec() to clamp this value after the bounds check to prevent speculative out-of-bounds access and subsequent data leakage via cache side channels. | ||||
| CVE-2025-71152 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: properly keep track of conduit reference Problem description ------------------- DSA has a mumbo-jumbo of reference handling of the conduit net device and its kobject which, sadly, is just wrong and doesn't make sense. There are two distinct problems. 1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch: (unbind the conduit driver for net device eno2) echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind we see these lines in the output diff which appear only with the patch applied: kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000) kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000) 2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()). Actually we actually use that netdev tracker mechanism implicitly on user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link(). But time still passes at DSA switch probe time between the initial of_find_net_device_by_node() code and the user port creation time, time during which the conduit could unregister itself and DSA wouldn't know about it. So we have to run of_find_net_device_by_node() under rtnl_lock() to prevent that from happening, and release the lock only with the netdev tracker having acquired the reference. Do we need to keep the reference until dsa_unregister_switch() / dsa_switch_shutdown()? 1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference. 2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed. As for the conduit's kobject for the /sys/class/net/ entry, we don't care about it, we can release it as soon as we hold the net device object itself. History and blame attribution ----------------------------- The code has been refactored so many times, it is very difficult to follow and properly attribute a blame, but I'll try to make a short history which I hope to be correct. We have two distinct probing paths: - one for OF, introduced in 2016 i ---truncated--- | ||||
| CVE-2025-38426 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add basic validation for RAS header If RAS header read from EEPROM is corrupted, it could result in trying to allocate huge memory for reading the records. Add some validation to header fields. | ||||
| CVE-2024-46691 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Move unregister out of atomic section Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")' moved the pmic_glink client list under a spinlock, as it is accessed by the rpmsg/glink callback, which in turn is invoked from IRQ context. This means that ucsi_unregister() is now called from atomic context, which isn't feasible as it's expecting a sleepable context. An effort is under way to get GLINK to invoke its callbacks in a sleepable context, but until then lets schedule the unregistration. A side effect of this is that ucsi_unregister() can now happen after the remote processor, and thereby the communication link with it, is gone. pmic_glink_send() is amended with a check to avoid the resulting NULL pointer dereference. This does however result in the user being informed about this error by the following entry in the kernel log: ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5 | ||||
| CVE-2024-43826 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfs: pass explicit offset/count to trace events nfs_folio_length is unsafe to use without having the folio locked and a check for a NULL ->f_mapping that protects against truncations and can lead to kernel crashes. E.g. when running xfstests generic/065 with all nfs trace points enabled. Follow the model of the XFS trace points and pass in an explіcit offset and length. This has the additional benefit that these values can be more accurate as some of the users touch partial folio ranges. | ||||
| CVE-2023-53228 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: drop redundant sched job cleanup when cs is aborted Once command submission failed due to userptr invalidation in amdgpu_cs_submit, legacy code will perform cleanup of scheduler job. However, it's not needed at all, as former commit has integrated job cleanup stuff into amdgpu_job_free. Otherwise, because of double free, a NULL pointer dereference will occur in such scenario. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457 | ||||
| CVE-2025-21752 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't use btrfs_set_item_key_safe on RAID stripe-extents Don't use btrfs_set_item_key_safe() to modify the keys in the RAID stripe-tree, as this can lead to corruption of the tree, which is caught by the checks in btrfs_set_item_key_safe(): BTRFS info (device nvme1n1): leaf 49168384 gen 15 total ptrs 194 free space 8329 owner 12 BTRFS info (device nvme1n1): refs 2 lock_owner 1030 current 1030 [ snip ] item 105 key (354549760 230 20480) itemoff 14587 itemsize 16 stride 0 devid 5 physical 67502080 item 106 key (354631680 230 4096) itemoff 14571 itemsize 16 stride 0 devid 1 physical 88559616 item 107 key (354631680 230 32768) itemoff 14555 itemsize 16 stride 0 devid 1 physical 88555520 item 108 key (354717696 230 28672) itemoff 14539 itemsize 16 stride 0 devid 2 physical 67604480 [ snip ] BTRFS critical (device nvme1n1): slot 106 key (354631680 230 32768) new key (354635776 230 4096) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2602! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 1055 Comm: fsstress Not tainted 6.13.0-rc1+ #1464 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0xf7/0x270 Code: <snip> RSP: 0018:ffffc90001337ab0 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff8881115fd000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff RBP: ffff888110ed6f50 R08: 00000000ffffefff R09: ffffffff8244c500 R10: 00000000ffffefff R11: 00000000ffffffff R12: ffff888100586000 R13: 00000000000000c9 R14: ffffc90001337b1f R15: ffff888110f23b58 FS: 00007f7d75c72740(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa811652c60 CR3: 0000000111398001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x1a ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? btrfs_set_item_key_safe+0xf7/0x270 ? exc_invalid_op+0x50/0x70 ? btrfs_set_item_key_safe+0xf7/0x270 ? asm_exc_invalid_op+0x1a/0x20 ? btrfs_set_item_key_safe+0xf7/0x270 btrfs_partially_delete_raid_extent+0xc4/0xe0 btrfs_delete_raid_extent+0x227/0x240 __btrfs_free_extent.isra.0+0x57f/0x9c0 ? exc_coproc_segment_overrun+0x40/0x40 __btrfs_run_delayed_refs+0x2fa/0xe80 btrfs_run_delayed_refs+0x81/0xe0 btrfs_commit_transaction+0x2dd/0xbe0 ? preempt_count_add+0x52/0xb0 btrfs_sync_file+0x375/0x4c0 do_fsync+0x39/0x70 __x64_sys_fsync+0x13/0x20 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f7d7550ef90 Code: <snip> RSP: 002b:00007ffd70237248 EFLAGS: 00000202 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f7d7550ef90 RDX: 000000000000013a RSI: 000000000040eb28 RDI: 0000000000000004 RBP: 000000000000001b R08: 0000000000000078 R09: 00007ffd7023725c R10: 00007f7d75400390 R11: 0000000000000202 R12: 028f5c28f5c28f5c R13: 8f5c28f5c28f5c29 R14: 000000000040b520 R15: 00007f7d75c726c8 </TASK> While the root cause of the tree order corruption isn't clear, using btrfs_duplicate_item() to copy the item and then adjusting both the key and the per-device physical addresses is a safe way to counter this problem. | ||||
| CVE-2023-53532 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix deinitialization of firmware resources Currently, in ath11k_ahb_fw_resources_init(), iommu domain mapping is done only for the chipsets having fixed firmware memory. Also, for such chipsets, mapping is done only if it does not have TrustZone support. During deinitialization, only if TrustZone support is not there, iommu is unmapped back. However, for non fixed firmware memory chipsets, TrustZone support is not there and this makes the condition check to true and it tries to unmap the memory which was not mapped during initialization. This leads to the following trace - [ 83.198790] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 83.259537] Modules linked in: ath11k_ahb ath11k qmi_helpers .. snip .. [ 83.280286] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 83.287228] pc : __iommu_unmap+0x30/0x140 [ 83.293907] lr : iommu_unmap+0x5c/0xa4 [ 83.298072] sp : ffff80000b3abad0 .. snip .. [ 83.369175] Call trace: [ 83.376282] __iommu_unmap+0x30/0x140 [ 83.378541] iommu_unmap+0x5c/0xa4 [ 83.382360] ath11k_ahb_fw_resource_deinit.part.12+0x2c/0xac [ath11k_ahb] [ 83.385666] ath11k_ahb_free_resources+0x140/0x17c [ath11k_ahb] [ 83.392521] ath11k_ahb_shutdown+0x34/0x40 [ath11k_ahb] [ 83.398248] platform_shutdown+0x20/0x2c [ 83.403455] device_shutdown+0x16c/0x1c4 [ 83.407621] kernel_restart_prepare+0x34/0x3c [ 83.411529] kernel_restart+0x14/0x74 [ 83.415781] __do_sys_reboot+0x1c4/0x22c [ 83.419427] __arm64_sys_reboot+0x1c/0x24 [ 83.423420] invoke_syscall+0x44/0xfc [ 83.427326] el0_svc_common.constprop.3+0xac/0xe8 [ 83.430974] do_el0_svc+0xa0/0xa8 [ 83.435659] el0_svc+0x1c/0x44 [ 83.438957] el0t_64_sync_handler+0x60/0x144 [ 83.441910] el0t_64_sync+0x15c/0x160 [ 83.446343] Code: aa0103f4 f9400001 f90027a1 d2800001 (f94006a0) [ 83.449903] ---[ end trace 0000000000000000 ]--- This can be reproduced by probing an AHB chipset which is not having a fixed memory region. During reboot (or rmmod) trace can be seen. Fix this issue by adding a condition check on firmware fixed memory hw_param as done in the counter initialization function. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2023-53530 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() The following call trace was observed: localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092 localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291" localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1 localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022 localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core] localhost kernel: Call Trace: localhost kernel: dump_stack_lvl+0x57/0x7d localhost kernel: check_preemption_disabled+0xc8/0xd0 localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] Use raw_smp_processor_id() instead of smp_processor_id(). Also use queue_work() across the driver instead of queue_work_on() thus avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled. | ||||
| CVE-2025-39935 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codec: sma1307: Fix memory corruption in sma1307_setting_loaded() The sma1307->set.header_size is how many integers are in the header (there are 8 of them) but instead of allocating space of 8 integers we allocate 8 bytes. This leads to memory corruption when we copy data it on the next line: memcpy(sma1307->set.header, data, sma1307->set.header_size * sizeof(int)); Also since we're immediately copying over the memory in ->set.header, there is no need to zero it in the allocator. Use devm_kmalloc_array() to allocate the memory instead. | ||||
| CVE-2025-39937 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored | ||||
| CVE-2023-53541 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. | ||||
| CVE-2023-53536 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments. | ||||
| CVE-2023-53533 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe rpi_firmware_get() take reference, we need to release it in error paths as well. Use devm_rpi_firmware_get() helper to handling the resources. Also remove the existing rpi_firmware_put(). | ||||
| CVE-2023-53534 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: mtk_drm_crtc: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. | ||||
| CVE-2022-50506 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drbd: only clone bio if we have a backing device Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case. | ||||
| CVE-2022-50491 | 1 Linux | 1 Linux Kernel | 2026-03-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: cti: Fix hang in cti_disable_hw() cti_enable_hw() and cti_disable_hw() are called from an atomic context so shouldn't use runtime PM because it can result in a sleep when communicating with firmware. Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock management to the SCMI power domain""), this causes a hang on Juno when running the Perf Coresight tests or running this command: perf record -e cs_etm//u -- ls This was also missed until the revert commit because pm_runtime_put() was called with the wrong device until commit 692c9a499b28 ("coresight: cti: Correct the parameter for pm_runtime_put") With lock and scheduler debugging enabled the following is output: coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022 Call trace: dump_backtrace+0x134/0x140 show_stack+0x20/0x58 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x180/0x228 __might_sleep+0x50/0x88 __pm_runtime_resume+0xac/0xb0 cti_enable+0x44/0x120 coresight_control_assoc_ectdev+0xc0/0x150 coresight_enable_path+0xb4/0x288 etm_event_start+0x138/0x170 etm_event_add+0x48/0x70 event_sched_in.isra.122+0xb4/0x280 merge_sched_in+0x1fc/0x3d0 visit_groups_merge.constprop.137+0x16c/0x4b0 ctx_sched_in+0x114/0x1f0 perf_event_sched_in+0x60/0x90 ctx_resched+0x68/0xb0 perf_event_exec+0x138/0x508 begin_new_exec+0x52c/0xd40 load_elf_binary+0x6b8/0x17d0 bprm_execve+0x360/0x7f8 do_execveat_common.isra.47+0x218/0x238 __arm64_sys_execve+0x48/0x60 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.4+0xfc/0x120 do_el0_svc+0x34/0xc0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 Fix the issue by removing the runtime PM calls completely. They are not needed here because it must have already been done when building the path for a trace. [ Fix build warnings ] | ||||