Export limit exceeded: 395607 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395607 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90561 | 1 Strapi | 1 Strapi | 2026-09-18 | 8.7 High |
| Strapi versions 4.x through 4.26.2 and 5.x before 5.48.1 contain a stored cross-site scripting vulnerability in the content manager WYSIWYG preview component that fails to strip script tags from rich text. An Author-role user can store malicious script tags in rich text fields that execute in an Editor or Super Admin's session when the preview pane is expanded, enabling account takeover. | ||||
| CVE-2026-90556 | 1 Freeciv | 1 Freeciv | 2026-09-18 | 7.8 High |
| Freeciv versions before 3.2.6 contain a heap buffer overflow in worklist_load() when processing savegame files with declared worklist lengths exceeding the fixed array bound of 64 elements. Attackers can craft malicious savegame files that write past the entries array into adjacent heap-allocated struct fields, potentially corrupting memory when a user or server operator loads the file. | ||||
| CVE-2026-90489 | 1 Xuxueli | 1 Xxl-job | 2026-09-18 | 3.5 Low |
| A vulnerability was identified in Xuxueli xxl-job up to 3.5.0. This vulnerability affects unknown code of the file /jobinfo/insert. Such manipulation of the argument name/author leads to cross site scripting. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-90435 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing qp->sq.offset in _create_user_qp() before set_user_buf_size() is reached. | ||||
| CVE-2026-90429 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Synchronize the error ISR against VINTF (de)init A user VINTF is torn down by tegra241_cmdqv_deinit_vintf(), which runs from the destroy callback and from the init-failure unwind in the alloc handler. It clears the cmdqv->vintfs[] slot and lets the iommufd core free it, but nothing serializes that against the error interrupt: tegra241_cmdqv_isr() reads cmdqv->vintfs[idx] and dereferences the vintf. A concurrent error can make the ISR read a slot mid-clear (a NULL deref) or use a vintf which is about to be freed (a use-after-free). deinit_vintf() also returns idx to the IDA before clearing the slot, so a concurrent create that reuses idx can publish its new vintf into the slot, only for this teardown to erase it again with the stale NULL store. On the other end, tegra241_cmdqv_init_vintf() publishes a new vintf with a plain store to the cmdqv->vintfs[] slot, and the ISR dereferences fields of a published vintf such as vintf->base. A plain store gives no ordering on a weakly-ordered CPU, and a stale VINTF_ERR_MAP bit on a reused idx can make the ISR pick a vintf the moment it is published, before its fields are set or tegra241_vintf_hw_init() runs. The cmdqv->vintfs[0] slot stays NULL until tegra241_cmdqv_init_structures() first creates VINTF0, so the slot 0 read needs the same NULL check. Publish every slot with an smp_store_release(), and read each slot in the ISR with an smp_load_acquire() under a NULL check, so the ISR always sees a fully built vintf or NULL. Also make deinit_vintf() clear the slot, and synchronize_irq() prior to returning idx to the IDA, so no vintf is freed under a running handler and no reused idx is clobbered. | ||||
| CVE-2026-90425 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. | ||||
| CVE-2026-90419 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent out-of-bounds read in super root block parsing super-root inode metadata size is trusted before nilfs_read_inode_common(). Reject super-root inode sizes whose computed on-disk footprint exceeds the filesystem block size. This prevents malformed filesystem images from making nilfs_read_inode_common() read past the end of the super-root block. [ryusuke: clarify the commit title] | ||||
| CVE-2026-90408 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix overreads in ath12k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath12k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath12k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90403 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix error path in rtl_pci_probe() In the last error path in rtl_pci_probe(), the cleanup functions are skipped due to a wrong goto label. Moreover, the successful call to rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to be reverted. Fix this issue by updating the labels and adding the relevant cleanup functions to the last error path. | ||||
| CVE-2026-90402 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix controller cleanup on EDL sysfs failure mhi_register_controller() adds the controller device before creating the optional trigger_edl sysfs file. If sysfs_create_file() fails, the error path only drops the device reference and leaves the device registered. Hence, call device_del() in the error path before put_device(). | ||||
| CVE-2026-90401 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md: remove REQ_NOWAIT support from raid1/10/456 REQ_NOWAIT support in md personalities that can block internally is fundamentally incomplete. While reads can avoid some blocking paths, write requests can still encounter cases where one mirror succeeds while another returns -EAGAIN. At that point md cannot distinguish queue pressure from a real device failure, so it can neither record a bad block nor safely retry the write without REQ_NOWAIT, leaving mirrors with divergent data. Rather than continue advertising REQ_NOWAIT support for personalities that cannot implement it correctly, remove it from raid1, raid10 and raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to their underlying devices; stacked limits will still clear the feature if any component device lacks REQ_NOWAIT support. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90392 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF when reading bpf link info In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is accessed without holding any locks. If the prog is concurrently replaced via bpf_link_update, the old prog can be freed, leading to a potential UAF issue. Fix this by accessing link->prog under RCU protection to safely fetch the pointer and guarantee its lifetime while reading its fields. | ||||
| CVE-2026-90387 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: swiotlb: Preserve allocation virtual address for dynamic pools swiotlb_alloc_tlb() can allocate from the DMA atomic pool when a decrypted pool is needed from atomic context. With CONFIG_DMA_DIRECT_REMAP, the atomic pool is backed by remapped virtual addresses, which are not the same as the direct-map addresses returned by phys_to_virt(). swiotlb_init_io_tlb_pool() currently reconstructs the pool virtual address from the physical start address. For atomic-pool backed allocations this stores the wrong address in pool->vaddr. Later, swiotlb_free_tlb() passes that address to dma_free_from_pool(), which will fail to recognize the chunk Pass the virtual address returned by the allocation path into swiotlb_init_io_tlb_pool(), and store that address in pool->vaddr. This keeps the pool free path using the same virtual address as the allocator. | ||||
| CVE-2026-90383 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented. | ||||
| CVE-2026-90381 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx() When performing channel switches on different radios within a short timeframe, channel contexts with different bands can be carried for each struct ieee80211_vif_chanctx_switch. Rework mt76_switch_vif_chanctx() to properly handle this scenario. | ||||
| CVE-2026-90380 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_abort+0x54/0xa8 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x40/0xcc el1h_64_sync+0x7c/0x80 mt76_rx_poll_complete+0x280/0x470 mt76_dma_rx_poll+0x114/0x51c mt792x_poll_rx+0x60/0xf8 napi_threaded_poll_loop+0xe0/0x450 napi_threaded_poll+0x80/0x9c kthread+0x11c/0x158 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-90372 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss If a peer's VHT/HE MCS map has no supported spatial stream (all fields 0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255), which was then written into the firmware sta_rec_bf beamforming fields. Clamp the result to 0. | ||||