Export limit exceeded: 394922 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394922 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90383 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: sgi-gru: remove interrupt-context page-table walks The GRU TLB miss handler walks a process's page tables without holding page-table locks or a reference to the mapped page. It also uses a kernel page-table accessor on user page tables and supports only PMD-level large mappings on x86-64. Remove the direct walker. Send interrupt faults directly to user polling mode so the existing call-OS fallback retries them in process context. Remove the mmap-lock failure statistic that can no longer be incremented. | ||||
| CVE-2026-90382 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt76x02: do not WARN on invalid rx descriptor length The MPDU length in the rx descriptor comes from the hardware. In monitor mode with the fcsfail filter enabled, the hardware passes up corrupted frames, and a corrupted frame can report a length larger than the received buffer. The bounds check correctly discards such frames, but its WARN_ON_ONCE wrapper means any over-the-air garbage frame taints the kernel, and panics it on the first such frame when panic_on_warn is set. Drop the WARN and discard the frame silently, matching what commit c2d4c8723dbf ("mt76x2: remove some harmless WARN_ONs in tx status and rx path") did for the neighboring rx and tx status paths. Observed immediately on rx with an MT7612U in fcsfail monitor mode on a busy channel. | ||||
| CVE-2026-90381 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx() When performing channel switches on different radios within a short timeframe, channel contexts with different bands can be carried for each struct ieee80211_vif_chanctx_switch. Rework mt76_switch_vif_chanctx() to properly handle this scenario. | ||||
| CVE-2026-90380 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete A use-after-free issue occurs in mt76_rx_poll_complete due to a race condition. The STA has already been removed, but the rx_status still had a pointer to the wcid in the STA. Set the links' wcid pointers to be NULL for a MLD in mt7925_sta_pre_rcu_remove() BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470 Call trace: dump_backtrace+0xec/0x128 show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc8 print_report+0x1b8/0x710 kasan_report+0xe0/0x144 do_bad_area+0x120/0x260 do_tag_check_fault+0x20/0x34 do_mem_abort+0x54/0xa8 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x40/0xcc el1h_64_sync+0x7c/0x80 mt76_rx_poll_complete+0x280/0x470 mt76_dma_rx_poll+0x114/0x51c mt792x_poll_rx+0x60/0xf8 napi_threaded_poll_loop+0xe0/0x450 napi_threaded_poll+0x80/0x9c kthread+0x11c/0x158 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-90378 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt792x: Fix memory leak in SDIO TX path When tx_prepare_skb() returns an error in the SDIO TX path, the skb is not freed, leading to a memory leak. This can occur when zero-length frames (such as WNM NULL frames) are dropped to prevent potential hardware TX hangs. Fix this by properly releasing the skb with ieee80211_tx_status_ext() when tx_prepare_skb() fails. | ||||
| CVE-2026-90377 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RX data queuing of RRO 3.0 For RRO 3.0, RX data released from a RRO data queue should be put to the indicator queue. The frames are processed and completed in the context of the indicator queue NAPI, which only polls skbs queued on the MT_RXQ_RRO_IND list; frames queued under the data queue id are left sitting on that list until the data queue NAPI happens to run, stalling and reordering RX data. | ||||
| CVE-2026-90376 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix MLD ID in MAC TXD and HIF TXP Problem: MCU command timeout while the firmware state is normal, and the firmware keeps showing the error log "ERROR!! NO PAUSE...". Root cause: If the MLD_ID field in the TXD is neither the primary link id nor the secondary link id, it may lead to a firmware busy loop when the third link is in power saving mode. Remap frames directed to a third link to the primary link wcid. Since TX status events and txfree completions carry the wcid the firmware saw, use the remapped wcid for packet id tracking and non-AQL packet accounting as well, while the frame keeps its original link context for addressing, band and OMAC selection. | ||||
| CVE-2026-90375 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix non-AQL packet accounting for MLO stations __mt76_tx_queue_skb() overrides the wcid passed by the driver with sta->drv_priv, so the wcid might incorrectly be changed after TX, causing wcid->non_aql_packets to be counted on the wrong wcid. For example, on the AP side, if a station's setup link is the 5G link and the station uses 2G to transmit a frame, the value of non_aql_packets is increased on the 5G wcid but decreased on the 2G wcid. Once the inflated counter exceeds MT_MAX_NON_AQL_PKT, the TX scheduler permanently refuses to service the station. Drop the reassignment and account on the wcid used for transmission. This also records the actual wcid in the queue entry. | ||||
| CVE-2026-90374 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid(). | ||||
| CVE-2026-90373 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: clear wcid mask under mutex after RCU pointer clear mt7915_remove_interface() cleared the wcid mask bit with no lock held and before clearing the RCU wcid pointer. The mask is a non-atomic RMW shared with the allocators, which all run under dev->mt76.mutex; on DBDC the two wiphys share one mt76_dev, so this raced add_interface/sta_add on the other band and could leak or double-hand-out a wcid. Clearing the bit before the RCU pointer also let a concurrent allocation reuse the index and publish its wcid, which the subsequent NULL assignment then wiped. Move the clear into the existing mutex section, after the RCU pointer is cleared. | ||||
| CVE-2026-90372 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss If a peer's VHT/HE MCS map has no supported spatial stream (all fields 0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255), which was then written into the firmware sta_rec_bf beamforming fields. Clamp the result to 0. | ||||
| CVE-2026-90371 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix RXDMAD_C buffer recycling race The RXDMAD_C buffers come from the RRO data queues' page pools, which are bound to a different NAPI, so the direct page-pool recycle used here could race the owning NAPI; take the non-direct path as is already done for WED RX queues. | ||||
| CVE-2026-90370 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config The response TLV loop advanced by tlv->len without a minimum, so a theoretical firmware response containing a zero-length TLV could spin forever, hanging the CPU during device probe. The u32 payload was also read without bounds checking. Reject a short fixed field, stop on a TLV whose length underruns the header or overruns the skb. | ||||
| CVE-2026-90369 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix out-of-bounds access in mmio copy helpers mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to ALIGN(len, 4), so a length that is not a multiple of four reads past the source buffer (write_copy) or writes past the destination (read_copy). Copy the aligned body in the loop and handle the remaining tail through a 4-byte bounce buffer, keeping the register access width unchanged. | ||||
| CVE-2026-90368 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind. | ||||
| CVE-2026-90367 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: hold dev->mt76.mutex while disabling tx worker in SER mt7996_mac_reset_work() parked the tx worker and disabled the RX/TX NAPIs before taking dev->mt76.mutex. mt76_worker_disable()/_enable() are plain kthread park/unpark, not refcounted, and __mt76_set_channel() toggles the same worker and the MT76_RESET bit under the mutex. An L1 SER racing a channel switch could therefore have the worker unparked and MT76_RESET cleared while the reset path resets the DMA rings, corrupting descriptors or tokens. Take the mutex before disabling the worker, as mt7915 does. | ||||
| CVE-2026-90366 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a near-maximum beacon template the extra 8 bytes could push the offload command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic(). Reserve room for both countdown TLVs. | ||||
| CVE-2026-90365 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work. | ||||
| CVE-2026-90364 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Unregister cpufreq notifier on init failure acpi_processor_driver_init() registers the cpufreq policy notifier before registering the ACPI processor driver and setting up CPU hotplug state. If driver_register() or cpuhp_setup_state() fails, the error path only unregisters the ACPI processor driver and the idle driver. The cpufreq notifier remains registered even though initialization failed. Mirror the module exit path on the init failure path and unregister the cpufreq notifier when it has been registered. | ||||