Export limit exceeded: 25095 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25095 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40142 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Disable bottom softirqs as part of spin_lock_irq() on PREEMPT_RT snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts via spin_lock_irq(). This also implicitly disables the handling of softirqs such as TIMER_SOFTIRQ. On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not disable them. That means a timer can be invoked during spin_lock_irq() on the same CPU. Due to synchronisations reasons local_bh_disable() has a per-CPU lock named softirq_ctrl.lock which synchronizes individual softirq against each other. syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This is a possible deadlock. The softirq_ctrl.lock can not be made part of spin_lock_irq() as this would lead to too much synchronisation against individual threads on the system. To avoid the possible deadlock, softirqs must be manually disabled before the lock is acquired. Disable softirqs before the lock is acquired on PREEMPT_RT. | ||||
| CVE-2025-40113 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E The ADSP firmware on X1E has separate firmware binaries for the main firmware and the DTB. The same applies for the "lite" firmware loaded by the boot firmware. When preparing to load the new ADSP firmware we shutdown the lite_pas_id for the main firmware, but we don't shutdown the corresponding lite pas_id for the DTB. The fact that we're leaving it "running" forever becomes obvious if you try to reuse (or just access) the memory region used by the "lite" firmware: The &adsp_boot_mem is accessible, but accessing the &adsp_boot_dtb_mem results in a crash. We don't support reusing the memory regions currently, but nevertheless we should not keep part of the lite firmware running. Fix this by adding the lite_dtb_pas_id and shutting it down as well. We don't have a way to detect if the lite firmware is actually running yet, so ignore the return status of qcom_scm_pas_shutdown() for now. This was already the case before, the assignment to "ret" is not used anywhere. | ||||
| CVE-2025-40085 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card In try_to_register_card(), the return value of usb_ifnum_to_if() is passed directly to usb_interface_claimed() without a NULL check, which will lead to a NULL pointer dereference when creating an invalid USB audio device. Fix this by adding a check to ensure the interface pointer is valid before passing it to usb_interface_claimed(). | ||||
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2025-40049 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix uninit-value in squashfs_get_parent Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug. This is caused by open_by_handle_at() being called with a file handle containing an invalid parent inode number. In particular the inode number is that of a symbolic link, rather than a directory. Squashfs_get_parent() gets called with that symbolic link inode, and accesses the parent member field. unsigned int parent_ino = squashfs_i(inode)->parent; Because non-directory inodes in Squashfs do not have a parent value, this is uninitialised, and this causes an uninitialised value access. The fix is to initialise parent with the invalid inode 0, which will cause an EINVAL error to be returned. Regular inodes used to share the parent field with the block_list_start field. This is removed in this commit to enable the parent field to contain the invalid inode number 0. | ||||
| CVE-2025-59691 | 2 Linux, Purevpn | 2 Linux, Purevpn | 2026-04-15 | 3.7 Low |
| PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0. | ||||
| CVE-2025-59692 | 2 Linux, Purevpn | 2 Linux, Purevpn | 2026-04-15 | 3.7 Low |
| PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0. | ||||
| CVE-2025-61667 | 2 Datadoghq, Linux | 2 Agent, Linux | 2026-04-15 | 7.3 High |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. A vulnerability within the Datadog Linux Host Agent versions 7.65.0 through 7.70.2 exists due to insufficient permissions being set on the `opt/datadog-agent/python-scripts/__pycache__` directory during installation. Code in this directory is only run by the Agent during Agent install/upgrades. This could allow an attacker with local access to modify files in this directory, which would then subsequently be run when the Agent is upgraded, resulting in local privilege escalation. This issue requires local access to the host and a valid low privilege account to be vulnerable. Note that this vulnerability only impacts the Linux Host Agent. Other variations of the Agent including the container, kubernetes, windows host and other agents are not impacted. Version 7.71.0 contains a patch for the issue. | ||||
| CVE-2025-62577 | 5 Fsas Technologies, Linux, Microsoft and 2 more | 5 Eternus Sf, Linux, Windows Server and 2 more | 2026-04-15 | N/A |
| ETERNUS SF provided by Fsas Technologies Inc. contains an incorrect default permissions vulnerability. A low-privileged user with access to the management server may obtain database credentials, potentially allowing execution of OS commands with administrator privileges. | ||||
| CVE-2025-64984 | 3 Apple, Kaspersky, Linux | 5 Macos, Endpoint Security, Industrial Cybersecurity and 2 more | 2026-04-15 | 6.1 Medium |
| Kaspersky has fixed a security issue in Kaspersky Endpoint Security for Linux (any version with anti-virus databases prior to 18.11.2025), Kaspersky Industrial CyberSecurity for Linux Nodes (any version with anti-virus databases prior to 18.11.2025), and Kaspersky Endpoint Security for Mac (12.0.0.325, 12.1.0.553, and 12.2.0.694 with anti-virus databases prior to 18.11.2025) that could have allowed a reflected XSS attack to be carried out by an attacker using phishing techniques. | ||||
| CVE-2025-68247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Plug potential memory leak in do_timer_create() When posix timer creation is set to allocate a given timer ID and the access to the user space value faults, the function terminates without freeing the already allocated posix timer structure. Move the allocation after the user space access to cure that. [ tglx: Massaged change log ] | ||||
| CVE-2025-68187 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mdio: Check regmap pointer returned by device_node_to_regmap() The call to device_node_to_regmap() in airoha_mdio_probe() can return an ERR_PTR() if regmap initialization fails. Currently, the driver stores the pointer without validation, which could lead to a crash if it is later dereferenced. Add an IS_ERR() check and return the corresponding error code to make the probe path more robust. | ||||
| CVE-2025-68210 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: avoid infinite loop due to incomplete zstd-compressed data Currently, the decompression logic incorrectly spins if compressed data is truncated in crafted (deliberately corrupted) images. | ||||
| CVE-2025-68194 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: imon: make send_packet() more robust syzbot is reporting that imon has three problems which result in hung tasks due to forever holding device lock [1]. First problem is that when usb_rx_callback_intf0() once got -EPROTO error after ictx->dev_present_intf0 became true, usb_rx_callback_intf0() resubmits urb after printk(), and resubmitted urb causes usb_rx_callback_intf0() to again get -EPROTO error. This results in printk() flooding (RCU stalls). Alan Stern commented [2] that In theory it's okay to resubmit _if_ the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don't bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There's nothing really wrong with giving up right away. but imon has a poor error-recovery scheme which just retries forever; this behavior should be fixed. Since I'm not sure whether it is safe for imon users to give up upon any error code, this patch takes care of only union of error codes chosen from modules in drivers/media/rc/ directory which handle -EPROTO error (i.e. ir_toy, mceusb and igorplugusb). Second problem is that when usb_rx_callback_intf0() once got -EPROTO error before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge hardware after early callbacks"). Move the ictx->dev_present_intf0 test introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes until intf configured") to immediately before imon_incoming_packet(), or the first problem explained above happens without printk() flooding (i.e. hung task). Third problem is that when usb_rx_callback_intf0() is not called for some reason (e.g. flaky hardware; the reproducer for this problem sometimes prevents usb_rx_callback_intf0() from being called), wait_for_completion_interruptible() in send_packet() never returns (i.e. hung task). As a workaround for such situation, change send_packet() to wait for completion with timeout of 10 seconds. | ||||
| CVE-2025-68197 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix null pointer dereference in bnxt_bs_trace_check_wrap() With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER for FW trace data type that has not been initialized. This will result in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a valid magic_byte pointer before proceeding. | ||||
| CVE-2025-68209 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mlx5: Fix default values in create CQ Currently, CQs without a completion function are assigned the mlx5_add_cq_to_tasklet function by default. This is problematic since only user CQs created through the mlx5_ib driver are intended to use this function. Additionally, all CQs that will use doorbells instead of polling for completions must call mlx5_cq_arm. However, the default CQ creation flow leaves a valid value in the CQ's arm_db field, allowing FW to send interrupts to polling-only CQs in certain corner cases. These two factors would allow a polling-only kernel CQ to be triggered by an EQ interrupt and call a completion function intended only for user CQs, causing a null pointer exception. Some areas in the driver have prevented this issue with one-off fixes but did not address the root cause. This patch fixes the described issue by adding defaults to the create CQ flow. It adds a default dummy completion function to protect against null pointer exceptions, and it sets an invalid command sequence number by default in kernel CQs to prevent the FW from sending an interrupt to the CQ until it is armed. User CQs are responsible for their own initialization values. Callers of mlx5_core_create_cq are responsible for changing the completion function and arming the CQ per their needs. | ||||
| CVE-2025-68221 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix address removal logic in mptcp_pm_nl_rm_addr Fix inverted WARN_ON_ONCE condition that prevented normal address removal counter updates. The current code only executes decrement logic when the counter is already 0 (abnormal state), while normal removals (counter > 0) are ignored. | ||||
| CVE-2025-68230 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gpu page fault after hibernation on PF passthrough On PF passthrough environment, after hibernate and then resume, coralgemm will cause gpu page fault. Mode1 reset happens during hibernate, but partition mode is not restored on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right after resume. When CP access the MQD BO, wrong stride size is used, this will cause out of bound access on the MQD BO, resulting page fault. The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called when resume from a hibernation. KFD resume is called separately during a reset recovery or resume from suspend sequence. Hence it's not required to be called as part of partition switch. (cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a) | ||||
| CVE-2025-68231 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempool: fix poisoning order>0 pages with HIGHMEM The kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 <f3> aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283) Christoph found out this is due to the poisoning code not dealing properly with CONFIG_HIGHMEM because only the first page is mapped but then the whole potentially high-order page is accessed. We could give up on HIGHMEM here, but it's straightforward to fix this with a loop that's mapping, poisoning or checking and unmapping individual pages. | ||||
| CVE-2025-68238 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: fix DMA device NULL pointer dereference The DMA device pointer `dma_dev` was being dereferenced before ensuring that `cdns_ctrl->dmac` is properly initialized. Move the assignment of `dma_dev` after successfully acquiring the DMA channel to ensure the pointer is valid before use. | ||||