Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80629 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20 | ||||
| CVE-2026-80628 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor the enqueue logic into a caller-locked helper so snd_seq_oss_readq_put_timestamp() updates its suppression state under the same lock instead of racing the reset path. The buggy scenario involves two paths, with each column showing the order within that path: reset path: locked readq updater: 1. snd_seq_oss_reset() or 1. A reader or callback producer release reaches takes q->lock on the same queue. snd_seq_oss_readq_clear(). 2. snd_seq_oss_readq_clear() 2. The updater tests or modifies resets qlen, head, tail, qlen, head, and tail. and input_time. 3. snd_seq_oss_readq_clear() 3. The updater completes its wakes sleepers on read-modify-write sequence. q->midi_sleep. 4. Without q->lock, the reset 4. The resulting ring state drives can overlap the locked later reads and readiness. update. KCSAN reports: BUG: KCSAN: data-race in snd_seq_oss_readq_clear / snd_seq_oss_readq_free write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0: snd_seq_oss_readq_free+0x6c/0x80 snd_seq_oss_read+0xcb/0x250 odev_read+0x38/0x60 vfs_read+0xff/0x600 ksys_read+0xb4/0x140 __x64_sys_read+0x46/0x60 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1: snd_seq_oss_readq_clear+0x1f/0x90 snd_seq_oss_reset+0xa7/0xf0 snd_seq_oss_ioctl+0x6f6/0x7e0 odev_ioctl+0x56/0xc0 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000001 -> 0x00000000 | ||||
| CVE-2026-80623 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117 | ||||
| CVE-2026-80616 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-80611 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting a warning if it is not. Fix this by annotating acpi_idle_lpi_enter(), the generic __weak stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter() with __cpuidle. This moves these functions into the '.cpuidle.text' section, implicitly disabling ftrace instrumentation (notrace) along this sensitive path and preventing trace-induced RCU warnings during idle entry. | ||||
| CVE-2026-80602 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/lbr: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET entries for which the branch-from addresses are in the kernel. E.g. $ perf record -e cycles -o - -j any,save_type,u -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH ... The reason is that the hardware filter only considers the privilege level applicable to the branch target. Extend software filtering to also validate the branch-from addresses against br_sel, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-80587 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid combining some incoming suboptions Some MPTCP suboptions are mutually exclusive according to the RFC8684, but also because in different places, the code doesn't expect some combinations to be present. That's specially true for suboptions that would be present twice, but with different attributes. The new restrictions are the same as the ones applied on the output side, with mptcp_write_options. The same rules can be reused with a small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks this option [1], which is not the case on Linux. Here are the rules: Which options can be used together? X: mutually exclusive O: often used together C: can be used together in some cases P: could be used together but we prefer not to (optimisations) | Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC | |------|------|------|------|------|------|------|------|------| | MPC |------|------|------|------|------|------|------|------| | MPJ | X |------|------|------|------|------|------|------| | DSS | X | X |------|------|------|------|------|------| | ADD | X | X | P |------|------|------|------|------| | RM | C | C | C | P |------|------|------|------| | PRIO | X | C | C | C | C |------|------|------| | FAIL | X | X | C | X | X | X |------|------| | FC | X | X | P | X | X | X | X |------| | RST | X | X | X | X | X | X | O | O | |------|------|------|------|------|------|------|------|------| The only difference is with the 'P': another stack could send and ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be allowed. A few points of attention: - In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is no reason to add it with a SYN. Note that even with a 4th ACK, it doesn't seem to be useful, except when IDs are known in advance via another channel. Better not to break that. - Now, combining both an MP_CAPABLE and an MP_JOIN will no longer result to a reject of the two options, but only the second suboption is ignored. That seems OK to do that for this unexpected error. At least now all inconsistent combinations are handled the same way. This could change later in next. This also means the explicit checks for having both MPC + MPJ in subflow.c will now be unreachable. That's fine, they will be removed in a follow-up patch. - In case of conflicting combinations, the extra suboption(s) is/are ignored: having such combinations either means the remote peer is buggy, or is evil. The simplest action is then taken in this case: stop processing the current suboption. - In mp_opt->suboptions, there is also a bit reserved to the checksum, which can be used in an MP_CAPABLE and a DSS. Each time a DSS option can be used in parallel with another option, the checksum can be set, so the verification is combined into a new OPTIONS_MPTCP_DSS macro. - An MP_CAPABLE ACK can carry a Data-Level Length, and an optional Checksum: they are the same as the ones found in a DSS, because a DSS cannot be used in parallel to an MP_CAPABLE. Similarly, even if there is room, a DSS cannot be used with an MP_JOIN. | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-80572 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op. | ||||
| CVE-2026-80554 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Limit the number of channel program segments The processing of channel programs, and the CCWs within them, is done recursively. As such, there is an arbitrary (but not architectural) limit to the number of CCWs that can exist in a single channel program. The vfio-ccw logic breaks these channel programs into segments whenever it encounters a Transfer-In-Channel (TIC) CCW, and the combined number of segments count towards the global limit. Impose an equivalent limit to the number of segments until such logic can be made non-recursive. | ||||
| CVE-2026-80551 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Ensure first IDAW remains constant The first IDAW in a list does not need to be on a 2K/4K boundary like all others, and so is read separately to accurately calculate the size of the buffer needed to read the full IDAL. Verify that the address found in the first IDAW is unchanged between reads, to ensure a consistent set of IDAWs being worked with. | ||||
| CVE-2026-80526 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2562: Validate values for volume writes tas2562_volume_control_put() does not do any validation of the control value written by userspace, it uses it to look up a value in a fixed size array which can easily be overflowed and then writes whatever value it gets back to the device. Add validation that we are loading a value we have in the array. | ||||
| CVE-2026-74754 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: pair EH runtime PM get and put shost->eh_noresume is currently consulted twice in one error handling iteration: once before scsi_autopm_get_host() and once again before scsi_autopm_put_host(). That is racy when a PM-triggered error path flips shost->eh_noresume while the SCSI EH thread is still running. The problem flow looks like this: PM path ufshcd_set_dev_pwr_mode() shost->eh_noresume = 1 ufshcd_execute_start_stop <-- trigger EH ... shost->eh_noresume = 0 EH path scsi_error_handler() if (!shost->eh_noresume) scsi_autopm_get_host() <-- skipped ... if (!shost->eh_noresume) scsi_autopm_put_host() <-- executed later In that case one EH iteration can skip autoresume on entry and still drop a runtime PM reference on exit. That leaves an unmatched runtime PM put and can trigger a runtime PM usage count underflow. Fix this by making eh_noresume a regular bool so it can be accessed with READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use that snapshot for both runtime PM get and put decisions. | ||||
| CVE-2026-74747 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed. | ||||
| CVE-2026-74740 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain tcf_action_exec() handles TC_ACT_GOTO_CHAIN by first checking rcu_access_pointer(a->goto_chain) and then calling tcf_action_goto_chain_exec(), which does a second, independent rcu_dereference_bh(a->goto_chain) read and immediately dereferences chain->filter_chain. A concurrent tcf_action_set_ctrlact() (e.g. the gact replace path) can clear a->goto_chain between the two reads, so the second read returns NULL and tcf_action_goto_chain_exec() dereferences NULL. Fix the race by doing a single rcu_dereference_bh() read of a->goto_chain in tcf_action_exec(), checking it once for NULL, and passing the resulting chain pointer into tcf_action_goto_chain_exec(). This turns the split check/use into a single check/use on one value. | ||||
| CVE-2026-74739 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: skip hash tables in u32_bind_class() u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check. | ||||
| CVE-2026-74735 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. | ||||
| CVE-2026-74733 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. | ||||
| CVE-2026-74729 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock. | ||||
| CVE-2026-74723 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | ||||