Export limit exceeded: 410354 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410354 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23210 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix PTP NULL pointer dereference during VSI rebuild Fix race condition where PTP periodic work runs while VSI is being rebuilt, accessing NULL vsi->rx_rings. The sequence was: 1. ice_ptp_prepare_for_reset() cancels PTP work 2. ice_ptp_rebuild() immediately queues PTP work 3. VSI rebuild happens AFTER ice_ptp_rebuild() 4. PTP work runs and accesses NULL vsi->rx_rings Fix: Keep PTP work cancelled during rebuild, only queue it after VSI rebuild completes in ice_rebuild(). Added ice_ptp_queue_work() helper function to encapsulate the logic for queuing PTP work, ensuring it's only queued when PTP is supported and the state is ICE_PTP_READY. Error log: [ 121.392544] ice 0000:60:00.1: PTP reset successful [ 121.392692] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 121.392712] #PF: supervisor read access in kernel mode [ 121.392720] #PF: error_code(0x0000) - not-present page [ 121.392727] PGD 0 [ 121.392734] Oops: Oops: 0000 [#1] SMP NOPTI [ 121.392746] CPU: 8 UID: 0 PID: 1005 Comm: ice-ptp-0000:60 Tainted: G S 6.19.0-rc6+ #4 PREEMPT(voluntary) [ 121.392761] Tainted: [S]=CPU_OUT_OF_SPEC [ 121.392773] RIP: 0010:ice_ptp_update_cached_phctime+0xbf/0x150 [ice] [ 121.393042] Call Trace: [ 121.393047] <TASK> [ 121.393055] ice_ptp_periodic_work+0x69/0x180 [ice] [ 121.393202] kthread_worker_fn+0xa2/0x260 [ 121.393216] ? __pfx_ice_ptp_periodic_work+0x10/0x10 [ice] [ 121.393359] ? __pfx_kthread_worker_fn+0x10/0x10 [ 121.393371] kthread+0x10d/0x230 [ 121.393382] ? __pfx_kthread+0x10/0x10 [ 121.393393] ret_from_fork+0x273/0x2b0 [ 121.393407] ? __pfx_kthread+0x10/0x10 [ 121.393417] ret_from_fork_asm+0x1a/0x30 [ 121.393432] </TASK> | ||||
| CVE-2026-23202 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer The curr_xfer field is read by the IRQ handler without holding the lock to check if a transfer is in progress. When clearing curr_xfer in the combined sequence transfer loop, protect it with the spinlock to prevent a race with the interrupt handler. Protect the curr_xfer clearing at the exit path of tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race with the interrupt handler that reads this field. Without this protection, the IRQ handler could read a partially updated curr_xfer value, leading to NULL pointer dereference or use-after-free. | ||||
| CVE-2026-23198 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated--- | ||||
| CVE-2026-23191 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF. | ||||
| CVE-2026-23178 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root. | ||||
| CVE-2026-23172 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: fix potential skb->frags overflow in RX path When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown. | ||||
| CVE-2026-23154 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: fix segmentation of forwarding fraglist GRO This patch enhances GSO segment handling by properly checking the SKB_GSO_DODGY flag for frag_list GSO packets, addressing low throughput issues observed when a station accesses IPv4 servers via hotspots with an IPv6-only upstream interface. Specifically, it fixes a bug in GSO segmentation when forwarding GRO packets containing a frag_list. The function skb_segment_list cannot correctly process GRO skbs that have been converted by XLAT, since XLAT only translates the header of the head skb. Consequently, skbs in the frag_list may remain untranslated, resulting in protocol inconsistencies and reduced throughput. To address this, the patch explicitly sets the SKB_GSO_DODGY flag for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers (bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO packets as potentially modified after protocol translation. As a result, GSO segmentation will avoid using skb_segment_list and instead falls back to skb_segment for packets with the SKB_GSO_DODGY flag. This ensures that only safe and fully translated frag_list packets are processed by skb_segment_list, resolving protocol inconsistencies and improving throughput when forwarding GRO packets converted by XLAT. | ||||
| CVE-2026-23148 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference There is a race condition in nvmet_bio_done() that can cause a NULL pointer dereference in blk_cgroup_bio_start(): 1. nvmet_bio_done() is called when a bio completes 2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req) 3. The queue_response callback can re-queue and re-submit the same request 4. The re-submission reuses the same inline_bio from nvmet_req 5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete) invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL 6. The re-submitted bio enters submit_bio_noacct_nocheck() 7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode RIP: 0010:blk_cgroup_bio_start+0x10/0xd0 Call Trace: submit_bio_noacct_nocheck+0x44/0x250 nvmet_bdev_execute_rw+0x254/0x370 [nvmet] process_one_work+0x193/0x3c0 worker_thread+0x281/0x3a0 Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put() BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before the request can be re-submitted, preventing the race condition. | ||||
| CVE-2026-23146 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling hci_uart_register_dev(), which calls proto->open() to initialize hu->priv. However, if a TTY write wakeup occurs during this window, hci_uart_tx_wakeup() may schedule write_work before hu->priv is initialized, leading to a NULL pointer dereference in hci_uart_write_work() when proto->dequeue() accesses hu->priv. The race condition is: CPU0 CPU1 ---- ---- hci_uart_set_proto() set_bit(HCI_UART_PROTO_INIT) hci_uart_register_dev() tty write wakeup hci_uart_tty_wakeup() hci_uart_tx_wakeup() schedule_work(&hu->write_work) proto->open(hu) // initializes hu->priv hci_uart_write_work() hci_uart_dequeue() proto->dequeue(hu) // accesses hu->priv (NULL!) Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open() succeeds, ensuring hu->priv is initialized before any work can be scheduled. | ||||
| CVE-2026-23144 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure When a context DAMON sysfs directory setup is failed after setup of attrs/ directory, subdirectories of attrs/ directory are not cleaned up. As a result, DAMON sysfs interface is nearly broken until the system reboots, and the memory for the unremoved directory is leaked. Cleanup the directories under such failures. | ||||
| CVE-2026-23136 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state. | ||||
| CVE-2026-23133 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: fix dma_free_coherent() pointer dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses. | ||||
| CVE-2026-23128 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Set __nocfi on swsusp_arch_resume() A DABT is reported[1] on an android based system when resume from hiberate. This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*() and does not have a CFI hash, but swsusp_arch_resume() will attempt to verify the CFI hash when calling a copy of swsusp_arch_suspend_exit(). Given that there's an existing requirement that the entrypoint to swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text section, we cannot fix this by marking swsusp_arch_suspend_exit() with SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in swsusp_arch_resume(). Mark swsusp_arch_resume() as __nocfi to disable the CFI check. [1] [ 22.991934][ T1] Unable to handle kernel paging request at virtual address 0000000109170ffc [ 22.991934][ T1] Mem abort info: [ 22.991934][ T1] ESR = 0x0000000096000007 [ 22.991934][ T1] EC = 0x25: DABT (current EL), IL = 32 bits [ 22.991934][ T1] SET = 0, FnV = 0 [ 22.991934][ T1] EA = 0, S1PTW = 0 [ 22.991934][ T1] FSC = 0x07: level 3 translation fault [ 22.991934][ T1] Data abort info: [ 22.991934][ T1] ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 [ 22.991934][ T1] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 22.991934][ T1] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 22.991934][ T1] [0000000109170ffc] user address but active_mm is swapper [ 22.991934][ T1] Internal error: Oops: 0000000096000007 [#1] PREEMPT SMP [ 22.991934][ T1] Dumping ftrace buffer: [ 22.991934][ T1] (ftrace buffer empty) [ 22.991934][ T1] Modules linked in: [ 22.991934][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.98-android15-8-g0b1d2aee7fc3-dirty-4k #1 688c7060a825a3ac418fe53881730b355915a419 [ 22.991934][ T1] Hardware name: Unisoc UMS9360-base Board (DT) [ 22.991934][ T1] pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 22.991934][ T1] pc : swsusp_arch_resume+0x2ac/0x344 [ 22.991934][ T1] lr : swsusp_arch_resume+0x294/0x344 [ 22.991934][ T1] sp : ffffffc08006b960 [ 22.991934][ T1] x29: ffffffc08006b9c0 x28: 0000000000000000 x27: 0000000000000000 [ 22.991934][ T1] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000820 [ 22.991934][ T1] x23: ffffffd0817e3000 x22: ffffffd0817e3000 x21: 0000000000000000 [ 22.991934][ T1] x20: ffffff8089171000 x19: ffffffd08252c8c8 x18: ffffffc080061058 [ 22.991934][ T1] x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 0000000000000004 [ 22.991934][ T1] x14: ffffff8178c88000 x13: 0000000000000006 x12: 0000000000000000 [ 22.991934][ T1] x11: 0000000000000015 x10: 0000000000000001 x9 : ffffffd082533000 [ 22.991934][ T1] x8 : 0000000109171000 x7 : 205b5d3433393139 x6 : 392e32322020205b [ 22.991934][ T1] x5 : 000000010916f000 x4 : 000000008164b000 x3 : ffffff808a4e0530 [ 22.991934][ T1] x2 : ffffffd08058e784 x1 : 0000000082326000 x0 : 000000010a283000 [ 22.991934][ T1] Call trace: [ 22.991934][ T1] swsusp_arch_resume+0x2ac/0x344 [ 22.991934][ T1] hibernation_restore+0x158/0x18c [ 22.991934][ T1] load_image_and_restore+0xb0/0xec [ 22.991934][ T1] software_resume+0xf4/0x19c [ 22.991934][ T1] software_resume_initcall+0x34/0x78 [ 22.991934][ T1] do_one_initcall+0xe8/0x370 [ 22.991934][ T1] do_initcall_level+0xc8/0x19c [ 22.991934][ T1] do_initcalls+0x70/0xc0 [ 22.991934][ T1] do_basic_setup+0x1c/0x28 [ 22.991934][ T1] kernel_init_freeable+0xe0/0x148 [ 22.991934][ T1] kernel_init+0x20/0x1a8 [ 22.991934][ T1] ret_from_fork+0x10/0x20 [ 22.991934][ T1] Code: a9400a61 f94013e0 f9438923 f9400a64 (b85fc110) [catalin.marinas@arm.com: commit log updated by Mark Rutland] | ||||
| CVE-2026-23121 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mISDN: annotate data-race around dev->work dev->work can re read locklessly in mISDN_read() and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations. BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1: misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline] mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xce/0x140 fs/ioctl.c:583 __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583 x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0: mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112 do_loop_readv_writev fs/read_write.c:847 [inline] vfs_readv+0x3fb/0x690 fs/read_write.c:1020 do_readv+0xe7/0x210 fs/read_write.c:1080 __do_sys_readv fs/read_write.c:1165 [inline] __se_sys_readv fs/read_write.c:1162 [inline] __x64_sys_readv+0x45/0x50 fs/read_write.c:1162 x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000 -> 0x00000001 | ||||
| CVE-2026-23112 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU length or offset exceeds sg_cnt and then use bogus sg->length/offset values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining entries, and sg->length/offset before building the bvec. | ||||
| CVE-2026-23105 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: qfq: Use cl_is_active to determine whether class is active in qfq_rm_from_ag This is more of a preventive patch to make the code more consistent and to prevent possible exploits that employ child qlen manipulations on qfq. use cl_is_active instead of relying on the child qdisc's qlen to determine class activation. | ||||
| CVE-2026-23103 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvlan: Make the addrs_lock be per port Make the addrs_lock be per port, not per ipvlan dev. Initial code seems to be written in the assumption, that any address change must occur under RTNL. But it is not so for the case of IPv6. So 1) Introduce per-port addrs_lock. 2) It was needed to fix places where it was forgotten to take lock (ipvlan_open/ipvlan_close) This appears to be a very minor problem though. Since it's highly unlikely that ipvlan_add_addr() will be called on 2 CPU simultaneously. But nevertheless, this could cause: 1) False-negative of ipvlan_addr_busy(): one interface iterated through all port->ipvlans + ipvlan->addrs under some ipvlan spinlock, and another added IP under its own lock. Though this is only possible for IPv6, since looks like only ipvlan_addr6_event() can be called without rtnl_lock. 2) Race since ipvlan_ht_addr_add(port) is called under different ipvlan->addrs_lock locks This should not affect performance, since add/remove IP is a rare situation and spinlock is not taken on fast paths. | ||||
| CVE-2026-23101 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: led-class: Only Add LED to leds_list when it is fully ready Before this change the LED was added to leds_list before led_init_core() gets called adding it the list before led_classdev.set_brightness_work gets initialized. This leaves a window where led_trigger_register() of a LED's default trigger will call led_trigger_set() which calls led_set_brightness() which in turn will end up queueing the *uninitialized* led_classdev.set_brightness_work. This race gets hit by the lenovo-thinkpad-t14s EC driver which registers 2 LEDs with a default trigger provided by snd_ctl_led.ko in quick succession. The first led_classdev_register() causes an async modprobe of snd_ctl_led to run and that async modprobe manages to exactly hit the window where the second LED is on the leds_list without led_init_core() being called for it, resulting in: ------------[ cut here ]------------ WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390 Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025 ... Call trace: __flush_work+0x344/0x390 (P) flush_work+0x2c/0x50 led_trigger_set+0x1c8/0x340 led_trigger_register+0x17c/0x1c0 led_trigger_register_simple+0x84/0xe8 snd_ctl_led_init+0x40/0xf88 [snd_ctl_led] do_one_initcall+0x5c/0x318 do_init_module+0x9c/0x2b8 load_module+0x7e0/0x998 Close the race window by moving the adding of the LED to leds_list to after the led_init_core() call. | ||||
| CVE-2026-23097 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: migrate: correct lock ordering for hugetlb file folios Syzbot has found a deadlock (analyzed by Lance Yang): 1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock). 2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire folio_lock. migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)! hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock! The migration path is the one taking locks in the wrong order according to the documentation at the top of mm/rmap.c. So expand the scope of the existing i_mmap_lock to cover the calls to remove_migration_ptes() too. This is (mostly) how it used to be after commit c0d0381ade79. That was removed by 336bf30eb765 for both file & anon hugetlb pages when it should only have been removed for anon hugetlb pages. | ||||
| CVE-2026-23085 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest. | ||||