Export limit exceeded: 49831 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (49831 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80831 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: mxs-dcp - fix source scatterlist length access mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid and could return zero or a stale DMA length, causing encryption and decryption to process the wrong number of bytes when CONFIG_NEED_SG_DMA_LENGTH=y. Use the original scatterlist length instead. | ||||
| CVE-2022-31684 | 2 Broadcom, Redhat | 3 Reactor Netty, Camel Spring Boot, Openshift Application Runtimes | 2026-09-04 | 4.3 Medium |
| Reactor Netty HTTP Server, in versions 1.0.11 - 1.0.23, may log request headers in some cases of invalid HTTP requests. The logged headers may reveal valid access tokens to those with access to server logs. This may affect only invalid HTTP requests where logging at WARN level is enabled. | ||||
| CVE-2026-80852 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tls: device: fix out-of-bounds write in tls_append_frag() Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: <TASK> worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> | ||||
| CVE-2026-80810 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec() io_vec_fill_bvec() computes the folio size with a plain int 1: unsigned long folio_size = 1 << imu->folio_shift; imu->folio_shift is unsigned int and comes from folio_shift() of the folio backing the registered buffer, so it can be 32 or more on a 64 bit kernel. Shifting int 1 that far is undefined, and on x86 and arm64 the count is taken modulo 32, so a shift of 34 yields 4 rather than 16G. Every other folio_shift shift in this file already uses 1UL. The result is that the segment estimate and the fill loop disagree. io_estimate_bvec_size() sizes the bvec array with the real shift: max_segs += (iov[i].iov_len >> shift) + 2; so a 1M iovec on a 16G folio is charged 2 segments, while io_vec_fill_bvec() then walks the same iovec in folio_size chunks of 4 bytes and writes res_bvec[bvec_idx] a quarter of a million times, past the end of the array it was given. src_bvec is advanced once per iteration as well, so imu->bvec is read past its end at the same time. validate_fixed_range() only checks that the range is inside the registered buffer and does not bound the segment count. Reaching it needs a folio with a shift of at least 32, which means a gigantic hugetlb page: 16G on arm64 with 64K pages, where CONT_PMD_SHIFT is 34 and hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT) registers that size, and likewise on powerpc. x86_64 tops out at 1G, so a shift of 30, which still fits in int and is unaffected. Use 1UL, as the rest of the file does. | ||||
| CVE-2026-43820 | 1 Apple | 1 Swiftnio Ssl | 2026-09-04 | 7.7 High |
| NIOSSLCertificate._subjectAlternativeNames provides access to the raw bytes for a cert's SANs. NIOSSL provides access to a buffer assumed to be backed by an ASN1_STRING, but not all SANs are backed by ASN1_STRING, so accessing the buffer for such a type can lead to out-of-bounds memory access. This vulnerability is addressed in swift-nio-ssl version 2.37.2. | ||||
| CVE-2026-85455 | 1 Themoos | 1 Core-moos | 2026-09-04 | 8.2 High |
| MOOS core-moos through 10.4.0 contains a buffer over-read vulnerability in CMOOSCommPkt where a four-byte packet triggers out-of-bounds memory access during deserialization. Attackers can open a TCP connection to the MOOSDB port and send a crafted short packet to read memory before authentication. | ||||
| CVE-2026-85063 | 1 Adaltas | 1 Node-csv | 2026-09-04 | 6.5 Medium |
| node-csv is a full-featured CSV parser with a simple API that is tested against large datasets. Prior to 7.0.2, csv-parse with the columns and group_columns_by_name options enabled treats a duplicate __proto__ header as an existing property in packages/csv-parse/lib/api/index.js, assigns an attacker-controlled array through obj['__proto__'], and replaces the parsed record object's prototype. A malicious CSV header can therefore inject inherited array values into the returned record, hide those inherited values from JSON serialization, and affect property enumeration and type or shape checks in applications that process the record. This issue is fixed in version 7.0.2. | ||||
| CVE-2026-71429 | 1 Uhop | 1 Stream-json | 2026-09-04 | 6.2 Medium |
| stream-json is a micro-library of stream components for processing JSON and JSONC with a minimal memory footprint. Prior to 3.5.0, the path filters pick, ignore, filter, and replace in src/core/filters/filter-base.js recompute the full path string from the nesting stack for every checkable token. Because the stack length equals the current nesting depth and a checkable token is emitted at every level, a depth D document costs O(D²) rather than O(D) to process. The issue is triggered by nesting depth rather than byte volume, including the documented pick({filter: 'data'}) traversal-until-match path, so an application that sends untrusted JSON through a string or RegExp filter can block the Node.js event loop and cause denial of service with a small deeply nested document. The streamArray, streamObject, and streamValues streamers are not affected because they use the constant-time asm.depth getter. This issue is fixed in version 3.5.0. | ||||
| CVE-2026-14350 | 1 Ibm | 1 Cloud Pak For Data System | 2026-09-04 | 5.3 Medium |
| IBM Cloud Pak for Data System 11.3.0.2 through Interim Fix 001 could allow an unauthorized user to inject data into log messages due to improper neutralization of special elements when written to log files. | ||||
| CVE-2026-41001 | 2 Spring, Vmware | 2 Spring Boot, Spring Boot | 2026-09-04 | 5.3 Medium |
| Spring Boot's ArtemisEmbeddedConfigurationFactory uses a fixed, static path for the embedded Artemis message broker's data directory when no explicit path is configured. A local attacker on the same host can pre-create this predictable directory or place a symlink before the application starts. Affected versions: Spring Boot 4.0.0 through 4.0.6; 3.5.0 through 3.5.14; 3.4.0 through 3.4.16; 3.3.0 through 3.3.19; 2.7.0 through 2.7.33. | ||||
| CVE-2026-11803 | 1 Autodesk | 1 Revit | 2026-09-04 | 7.8 High |
| A maliciously crafted PDF file, when parsed through Autodesk Revit, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process. | ||||
| CVE-2026-80796 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add data_len bound checks to activation parameter extractors nci_extract_activation_params_iso_dep() and nci_extract_activation_params_nfc_dep() read an inner length byte from the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed kernel buffers, but neither function receives the caller-validated activation_params_len. A crafted NCI notification with activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or 50 (NFC-B) causes memcpy() to read that many bytes past the one valid byte in the activation params region -- a slab out-of-bounds read of kernel memory adjacent to the NCI skb. The sibling nci_extract_rf_params_*() family was given equivalent protection by commit 571dcbeb8e63 ("net: nfc: nci: Fix parameter validation for packet data"), but the two activation parameter extractors were not updated at that time. Add a data_len parameter to both functions, guard against an empty region before consuming the inner length byte, decrement the remaining count after consuming it, and clamp the copy length to what is actually available. Update both call sites to pass ntf.activation_params_len, which is already validated against the skb at ntf.c:801. | ||||
| CVE-2026-80799 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain three related bugs in their TLV parsing loops: 1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data advances offset past 255 it silently wraps to zero, causing infinite loops or double-processing of buffer data. 2. Before reading tlv[0] (type) and tlv[1] (length) there is no check that offset+2 <= tlv_array_len. A truncated TLV causes an OOB read of one byte past the buffer end. 3. After reading the length field, the value bytes are accessed without checking offset+2+length <= tlv_array_len. A crafted length=0xFF on a short buffer causes up to 255 bytes of OOB read past the buffer end. Both functions are reachable without authentication via nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes directly into nfc_llcp_parse_gb_tlv() with no additional validation. Fix all three issues by widening offset from u8 to u16 and adding bounds checks for both the TLV header and value field before each access. | ||||
| CVE-2026-80803 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: digital: clamp SENSF_RES length to the destination buffer digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res field without an upper-bound check. A nearby malicious NFC-F device can send an oversized SENSF_RES response to overflow the stack-local struct nfc_target. Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80805 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: validate attr entry pointer before field access xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen, valuelen) before checking if the entry pointer itself is within bounds. If nameidx is crafted to point near the end of the buffer, these field accesses can read out-of-bounds before the bounds check at name_end > buf_end is performed. Add explicit bounds checks for entry pointers before accessing their fields. Use offsetof() to check that the start of the flexible array member (nameval/name) is within bounds, which ensures all preceding fields are safe to access. | ||||
| CVE-2026-80759 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_aml: validate firmware segment lengths aml_download_firmware() reads two lengths from the firmware header and uses them to build pointers before checking that the header and segment data are present. A truncated or inconsistent firmware image can make the driver read past firmware->data while constructing TCI commands. Reject images shorter than the header and ensure that the ICCM and DCCM ranges fit within the loaded firmware before downloading either segment. | ||||
| CVE-2026-80812 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: dummy: Check card index validity at probe snd_dummy_probe() blindly trusts that the given devptr->id value is within the proper card index range. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range. | ||||
| CVE-2026-80814 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rndis_host: add overflow check in rndis_rx_fixup() Add an overflow check to ensure that data_offset + data_len + 8 does not wrap, which would enable an OOB read of the USB data buffer. | ||||
| CVE-2026-85508 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 9.8 Critical |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_ipv6_info in ipmi-oem/ipmi-oem-dell.c (cmc-ipv6-info subcommand to dell get-system-info). | ||||
| CVE-2026-84504 | 1 Fastify | 1 Fastify | 2026-09-04 | 8.1 High |
| fastify versions before 5.12.2 treat the object resolved by a successful Ajv async validator as the value result protocol used by custom validator compilers. If a request that passes its route schema contains a property named value at the root, fastify replaces the entire request body with that property's value before the handler runs, so the handler receives a different object than the one that satisfied the schema. An authenticated low-privilege caller can use this to make nested data replace the validated body and trigger an operation the route schema did not authorize, leading to unauthorized state changes and data disclosure. Users should upgrade to fastify 5.12.2 or later. | ||||