Export limit exceeded: 391397 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (391397 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89640 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep(). | ||||
| CVE-2026-89636 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear ce->tgthint in free_tgts() When free_tgts() frees all structures in ce->tlist, ce->tgthint is left pointing to one of the freed cache_dfs_tgt structures. If ce->tgthint is not reset before it is used later, it results in a use-after-free. Set ce->tgthint to NULL in free_tgts() after the elements are freed to reflect that no elements remain. | ||||
| CVE-2026-89634 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix ALIGN() overflow in symlink_data() error context loop The check added by commit 7d9a7f1f96cd ("smb/client: fix possible infinite loop and oob read in symlink_data()") compared the post-ALIGN length against the remaining buffer, but ALIGN() itself can overflow: for ErrorDataLength near UINT32_MAX (e.g. 0xFFFFFFF9), ALIGN(x, 8) wraps to 0, so the subsequent bounds check passes, and the loop advances by zero bytes leaving 'p' pointing into stale data. Fix by checking the raw ErrorDataLength against the remaining space before applying ALIGN(), then checking again after. Since raw_len is bounded by the buffer, raw_len + 7 cannot overflow, so the second check is an exact post-alignment bounds guard. | ||||
| CVE-2026-89628 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: clamp eeprom debugfs read to bytes actually received picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte supplied by the device in its REPORT_EE_DATA reply -- clamped only to the caller's read() count: ret = resp->raw_data[2]; if (ret > s) ret = s; if (copy_to_user(u, resp->raw_data+3, ret)) It never checks resp->raw_size, the number of bytes picolcd_raw_event() actually copied into the 64-byte raw_data[] of the kmalloc'd struct picolcd_pending. A device (or a spoofed picoLCD) returning a length byte of 0xff, read with a count >= 255, makes copy_to_user() read past raw_data[] into adjacent slab memory and return it to userspace through the debugfs "eeprom" file: BUG: KASAN: slab-out-of-bounds in _copy_to_user Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd] The debug-dump path in the same file already validates the device length byte against the received size before trusting it; this read does not. The file is created S_IRUSR (root-only) and a crafted device is needed, so it is neither unprivileged- nor remotely-triggerable. Clamp the copy length to resp->raw_size - 3 (the payload actually received, minus the 3-byte header), floored at 0 for short replies. | ||||
| CVE-2026-89627 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: roccat: free buffered reports when destroying device roccat_report_event() duplicates each report with kmemdup() and stores the allocation in a circular-buffer slot. The allocation is released only when that slot is reused. The device destruction paths free struct roccat_device without releasing reports still stored in cbuf[]. This makes those allocations unreachable and leaks up to ROCCAT_CBUF_SIZE report buffers per device. Add a small destructor that frees every buffered report before freeing the device, and use it in both paths that can destroy a registered device. | ||||
| CVE-2026-89626 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix field sysfs group cleanup on failure hid_sensor_custom_add_attributes() creates one sysfs group for each custom sensor field. If sysfs_create_group() fails after some groups have already been created, the function returns the error without removing the previously created groups. Add a local unwind path to remove the groups that were already created. With enable_sensor exposed only after the field attributes are ready, this path can free sensor_inst->fields without leaving enable_sensor able to access pointers into that array. | ||||
| CVE-2026-89623 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 3.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: stop device IO before hid_hw_stop Quiesce device IO at the start of the devm cleanup callback mcp2221_hid_unregister() so that incoming HID reports cannot race with hardware teardown during probe failure or device removal, addressing a potential use-after-free. Guard the call to hid_device_io_stop() with io_started. On normal removal hid_device_remove() has already cleared io_started before the devres group is released, so an unconditional call would otherwise hit the !io_started path and emit a spurious "io already stopped" warning on every removal. The guard preserves the probe-failure balancing, where io_started is still set after hid_device_io_start(), while staying silent on the normal removal path. | ||||
| CVE-2026-89621 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: validate report size in mcp2221_raw_event() mcp2221_raw_event() never validates the size of incoming HID reports. In the MCP2221_I2C_GET_DATA path it trusts the device-supplied data[3] as the copy length without checking that 4 + data[3] bytes actually exist in the received report. A malicious or misbehaving USB device can send a short report with a large data[3], causing the memcpy to read past the valid report data in the HID transfer buffer and leak uninitialized kernel memory back to userspace through the I2C/SMBus read path. Add a minimum size check at entry and validate that the source range fits within the received report before the copy. | ||||
| CVE-2026-89618 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: eventfs: Initialize ei->children and ei->list in init_ei() eventfs_create_dir() allocates the eventfs_inode and initializes it with init_ei(). But this does not initialize the eventfs_inode list_heads. If the eventfs_create_dir() fails due to memory pressure, it will call free_ei() before it initialized the lists, and that checks to make sure the eventfs_inode has no children. But because the list wasn't initialized, it will give a false warning. Fix it by moving the list initialization into init_ei(). [ Rewrote change log ] | ||||
| CVE-2026-89617 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate dirty page table on log replay Each DIR_PAGE_ENTRY ends in a page_lcns[] array whose length is the on-disk lcns_follow field. check_rstbl() validates the table bookkeeping but never checks that this array fits in the entry, so a crafted lcns_follow lets the v0->v1 conversion memmove and later replay passes run off the entry. Add check_dp_table() to reject, right after check_rstbl(), any entry larger than its size claims via struct_size() (the same expression used to allocate these entries, so the check is overflow-safe by construction). All consumers can then trust lcns_follow as the real capacity. This covers every page_lcns[] access whose index is bounded by the entry itself (the conversion memmove, the HotFix store via find_dp(), and the self-bounded scan loops). Accesses whose index comes from the log record need a separate bound and are handled in a follow-up patch. | ||||
| CVE-2026-89616 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix info-leak on partial LZNT decompress in ni_read_frame() ni_read_frame() decompresses an LZNT $DATA frame into the vmapped target pages and then trusts decompress_lznt()'s return value: unc_size = decompress_lznt(frame_ondisk, ondisk_size, frame_mem, frame_size); if ((ssize_t)unc_size < 0) err = unc_size; else if (!unc_size || unc_size > frame_size) err = -EINVAL; decompress_lznt() stops as soon as the compressed stream is exhausted (e.g. a zero chunk header) and returns the number of bytes it actually wrote, which may be far less than frame_size. The bytes between unc_size and frame_size are never written. The only memset() that follows zeroes the region beyond i_valid; when the frame lies entirely within the file's valid size that memset() does not run, so the gap retains whatever was in the just-vmapped pages. All pages are then marked uptodate and returned to userspace, disclosing uninitialized (recently-freed) kernel page memory. A crafted compressed file whose stream decompresses to only a few bytes leaks the remainder of every frame on a plain read(2), which is enough to recover kernel pointers and defeat KASLR. Zero the [unc_size, frame_size) tail immediately after a successful LZNT decompress so the remainder reads back as zero. | ||||
| CVE-2026-89615 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound page_lcns[] index by the log record The copy_lcns loop and the redo shorten loop index page_lcns[] at j + i, where i runs up to the log record's lcns_follow. That count is checked only against the record's own length, not the target entry, so check_dp_table() (which validates the entry's lcns_follow) does not cover it: the copy_lcns entry may even be freshly allocated after that check, and find_dp() bounds j but not i. A crafted record thus overflows page_lcns[] of an otherwise valid entry. Add dp_range_ok() and reject, before each loop, any record whose run does not fit the entry. These are the only two page_lcns[] accesses indexed by the record rather than the entry, so together with the entry validation every access is now bounded. [almaz.alexandrovich@paragon-software.com: original patch contained changes to the problem already handled, applied partly] | ||||
| CVE-2026-89609 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: hold msg ctx list lock when cleaning daemon queue ecryptfs_exorcise_daemon() drops queued messages from a dying daemon without holding ecryptfs_msg_ctx_lists_mux, but ecryptfs_msg_ctx_alloc_to_free() requires that lock. Take the list lock while moving the queued contexts back to the free list to avoid racing with other global msg ctx list users. | ||||
| CVE-2026-89608 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: pass packet set buffer size to parser ecryptfs_parse_packet_set() receives a pointer into the file header, but it calculates the remaining packet buffer size from PAGE_SIZE - 8. For version 1 headers the packet set starts later in the header, so this can overstate the available buffer. Pass the actual packet set buffer length from the caller and calculate per-packet limits from the remaining bytes in that buffer. Recompute the remaining length after consuming a tag 3 packet before parsing the following tag 11 packet. | ||||
| CVE-2026-89607 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key() sets decrypted_key_size = encrypted_key_size and performs two out-of-bounds writes: 1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into decrypted_key[64] via scatterlist, overflowing into the parent ecryptfs_auth_tok struct. 2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) writes into crypt_stat->key[64], corrupting root_iv, keysig_list, and mutexes in ecryptfs_crypt_stat. Only AES-192 (cipher code 0x08) enables this because it sets crypt_stat->key_size = 24 independently of encrypted_key_size, allowing crypto_skcipher_setkey() to succeed while encrypted_key_size exceeds ECRYPTFS_MAX_KEY_BYTES. The PKI decryption path (parse_tag_65_packet) already validates decrypted_key_size <= ECRYPTFS_MAX_KEY_BYTES; the passphrase path omits this check. Bound encrypted_key_size against ECRYPTFS_MAX_KEY_BYTES (64) rather than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES (512). The 64-byte limit also protects the 512-byte encrypted_key[] buffer, so the former 512-byte check is removed as redundant. [tyhicks: Adjust the code comment to refer to macros representing the buffer sizes rather than mentioning the buffer size values since they may change in the future] | ||||
| CVE-2026-89606 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject too-small tag 70 packets ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the parsed packet body size to derive the encrypted filename size. A malformed packet with a body smaller than those fixed fields can underflow that size calculation. Reject tag 70 packets before the subtraction unless the body contains the signature, cipher code, and at least one byte of encrypted filename data. | ||||
| CVE-2026-89605 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a message context from the free list to the allocated list before sending the request to the userspace daemon. If ecryptfs_send_miscdev() fails, the context is left on the allocated list and cannot be reused. Move it back to the free list on failure and clear the caller's pointer. | ||||
| CVE-2026-89604 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: Rate limit statfs() handler Ravi reports that statfs() may be called by unprivileged users on the efivarfs mount point, which may result in a flood of calls to the QueryVariableInfo() runtime service. These calls are disproportionately costly on x86 systems where the variable store is backed by SMM, as each SMM entry requires a rendez-vous of all the CPUs. So rate limit the calls to QueryVariableInfo() at twice per second, and return the most recently obtained value for calls that are elided. | ||||
| CVE-2026-89603 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: entry: Fix seccomp bypass after ptrace with TSYNC Sashiko review pointed out the following issue. If a thread is stopped in syscall_trace_enter() for ptrace, another thread can install a seccomp filter with SECCOMP_FILTER_FLAG_TSYNC (e.g., via seccomp_attach_filter()). This will successfully set SYSCALL_WORK_SECCOMP on the stopped thread, but syscall_trace_enter() evaluates a cached 'work' variable sampled on entry. Consequently, the subsequent check for SYSCALL_WORK_SECCOMP misses the newly assigned flag, and the filter is silently bypassed. This race condition could allow an unprivileged process to execute a prohibited system call (e.g., execve) that the newly installed filter was intended to block, especially since the tracer might have modified the system call number during the ptrace stop. Fix this by re-reading the syscall_work flags after ptrace handling, so that any new SYSCALL_WORK_SECCOMP flag set by another thread via TSYNC during the ptrace stop is observed before the subsequent seccomp check. | ||||
| CVE-2026-89599 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: panel-dsi-cm: initialize lock before registering display dsicm_probe() registers the display before initializing ddata->lock. Once omapdss_register_display() publishes the display, another consumer can reach a dsicm callback that takes this mutex while it is still uninitialized. Initialize the mutex before registering the display so the published callbacks always see a valid lock. | ||||