Export limit exceeded: 26911 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26911 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-42484 | 1 Espressif | 1 Esp-now | 2026-04-15 | 6.5 Medium |
| ESP-NOW Component provides a connectionless Wi-Fi communication protocol. An Out-of-Bound (OOB) vulnerability was discovered in the implementation of the ESP-NOW group type message because there is no check for the addrs_num field of the group type message. This can result in memory corruption related attacks. Normally there are two fields in the group information that need to be checked, i.e., the addrs_num field and the addrs_list fileld. Since we only checked the addrs_list field, an attacker can send a group type message with an invalid addrs_num field, which will cause the message handled by the firmware to be much larger than the current buffer, thus causing a memory corruption issue that goes beyond the payload length. | ||||
| CVE-2024-51983 | 2026-04-15 | 7.5 High | ||
| An unauthenticated attacker who can connect to the Web Services feature (HTTP TCP port 80) can issue a WS-Scan SOAP request containing an unexpected JobToken value which will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. | ||||
| CVE-2025-10392 | 1 Mercury | 1 Km08-708h Giga Wifi Wave2 | 2026-04-15 | 9.8 Critical |
| A vulnerability was detected in Mercury KM08-708H GiGA WiFi Wave2 1.1.14. This affects an unknown function of the component HTTP Header Handler. The manipulation of the argument Host results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. | ||||
| CVE-2024-27908 | 2026-04-15 | 4.9 Medium | ||
| A buffer overflow vulnerability was reported in the HTTPS service of some Lenovo Printers that could result in denial of service. | ||||
| CVE-2024-28051 | 2026-04-15 | 2.2 Low | ||
| Out-of-bounds read in some Intel(R) VPL software before version 24.1.4 may allow an authenticated user to potentially enable information disclosure via local access. | ||||
| CVE-2024-24972 | 1 Gallagher | 2 Controller 6000, Controller 7000 | 2026-04-15 | 6.5 Medium |
| Buffer Copy without Checking Size of Input (CWE-120) in the Controller 6000 and Controller 7000 diagnostic web interface allows an authorised and authenticated operator to reboot the Controller, causing a Denial of Service. Gallagher recommend the diagnostic web page is not enabled (default is off) unless advised by Gallagher Technical support. This interface is intended only for diagnostic purposes. This issue affects: Controller 6000 and Controller 7000 9.10 prior to vCR9.10.240816a (distributed in 9.10.1530 (MR2)), 9.00 prior to vCR9.00.240816a (distributed in 9.00.2168 (MR4)), 8.90 prior to vCR8.90.240816a (distributed in 8.90.2155 (MR5)), 8.80 prior to vCR8.80.240816b (distributed in 8.80.1938 (MR6)), all versions of 8.70 and prior. | ||||
| CVE-2024-29375 | 2026-04-15 | 9.8 Critical | ||
| CSV Injection vulnerability in Addactis IBNRS v.3.10.3.107 allows a remote attacker to execute arbitrary code via a crafted .ibnrs file to the Project Description, Identifiers, Custom Triangle Name (inside Input Triangles) and Yield Curve Name parameters. | ||||
| CVE-2024-29421 | 1 Xmedcon | 1 Medcon | 2026-04-15 | 6.2 Medium |
| xmedcon 0.23.0 and fixed in v.0.24.0 is vulnerable to Buffer Overflow via libs/dicom/basic.c which allows an attacker to execute arbitrary code. | ||||
| CVE-2025-37149 | 1 Hpe | 1 Proliant Rl300 Gen11 | 2026-04-15 | 6 Medium |
| A potential out-of-bound reads vulnerability in HPE ProLiant RL300 Gen11 Server's UEFI firmware. | ||||
| CVE-2025-1073 | 2026-04-15 | 7.5 High | ||
| Panasonic IR Control Hub (IR Blaster) versions 1.17 and earlier may allow an attacker with physical access to load unauthorized firmware onto the device. | ||||
| CVE-2025-3714 | 2026-04-15 | 9.8 Critical | ||
| The LCD KVM over IP Switch CL5708IM has a Stack-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device. | ||||
| CVE-2025-3712 | 2026-04-15 | 7.5 High | ||
| The LCD KVM over IP Switch CL5708IM has a Heap-based Buffer Overflow vulnerability in firmware versions prior to v2.2.215, allowing unauthenticated remote attackers to exploit this vulnerability to perform a denial-of-service attack. | ||||
| CVE-2024-43168 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-04-15 | 4.8 Medium |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A heap-buffer-overflow flaw was found in the cfg_mark_ports function within Unbound's config_file.c, which can lead to memory corruption. This issue could allow an attacker with local access to provide specially crafted input, potentially causing the application to crash or allowing arbitrary code execution. This could result in a denial of service or unauthorized actions on the system. | ||||
| CVE-2024-24459 | 2026-04-15 | 5.9 Medium | ||
| An invalid memory access when handling the ProtocolIE_ID field of S1Setup Request messages in Athonet vEPC MME v11.4.0 allows attackers to cause a Denial of Service (DoS) to the cellular network by repeatedly initiating connections and sending a crafted payload. | ||||
| CVE-2024-24458 | 2026-04-15 | 5.9 Medium | ||
| An invalid memory access when handling the ENB Configuration Transfer messages containing invalid PLMN Identities in Athonet vEPC MME v11.4.0 allows attackers to cause a Denial of Service (DoS) to the cellular network by repeatedly initiating connections and sending a crafted payload. | ||||
| CVE-2024-24457 | 2026-04-15 | 5.9 Medium | ||
| An invalid memory access when handling the ProtocolIE_ID field of E-RAB Setup List Context SURes messages in Athonet vEPC MME v11.4.0 allows attackers to cause a Denial of Service (DoS) to the cellular network by repeatedly initiating connections and sending a crafted payload. | ||||
| CVE-2024-8403 | 1 Mitsubishi Electric | 2 Melsec Iq-f Series Fx5-enet, Melsec Iq-f Series Fx5-enet Ip | 2026-04-15 | 7.5 High |
| Improper Validation of Specified Type of Input vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-ENET versions 1.100 to 1.200 and FX5-ENET/IP versions 1.100 to 1.104 allows a remote attacker to cause a Denial of Service condition in Ethernet communication of the products by sending specially crafted SLMP packets. | ||||
| CVE-2025-40246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix out of bounds memory read error in symlink repair xfs/286 produced this report on my test fleet: ================================================================== BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110 Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184): memcpy_orig+0x54/0x110 xrep_symlink_salvage_inline+0xb3/0xf0 [xfs] xrep_symlink_salvage+0x100/0x110 [xfs] xrep_symlink+0x2e/0x80 [xfs] xrep_attempt+0x61/0x1f0 [xfs] xfs_scrub_metadata+0x34f/0x5c0 [xfs] xfs_ioc_scrubv_metadata+0x387/0x560 [xfs] xfs_file_ioctl+0xe23/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128 allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago): xfs_init_local_fork+0x79/0xe0 [xfs] xfs_iformat_local+0xa4/0x170 [xfs] xfs_iformat_data_fork+0x148/0x180 [xfs] xfs_inode_from_disk+0x2cd/0x480 [xfs] xfs_iget+0x450/0xd60 [xfs] xfs_bulkstat_one_int+0x6b/0x510 [xfs] xfs_bulkstat_iwalk+0x1e/0x30 [xfs] xfs_iwalk_ag_recs+0xdf/0x150 [xfs] xfs_iwalk_run_callbacks+0xb9/0x190 [xfs] xfs_iwalk_ag+0x1dc/0x2f0 [xfs] xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs] xfs_iwalk+0xa4/0xd0 [xfs] xfs_bulkstat+0xfa/0x170 [xfs] xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs] xfs_file_ioctl+0xbf2/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014 ================================================================== On further analysis, I realized that the second parameter to min() is not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data buffer. if_bytes can be smaller than the data fork size because: (a) the forkoff code tries to keep the data area as large as possible (b) for symbolic links, if_bytes is the ondisk file size + 1 (c) forkoff is always a multiple of 8. Case in point: for a single-byte symlink target, forkoff will be 8 but the buffer will only be 2 bytes long. In other words, the logic here is wrong and we walk off the end of the incore buffer. Fix that. | ||||
| CVE-2025-29476 | 2026-04-15 | 5.5 Medium | ||
| Buffer Overflow vulnerability in compress_chunk_fuzzer with oss-fuzz on commit 16450518afddcb3139de627157208e49bfef6987 in c-blosc2 v.2.17.0 and before. | ||||
| CVE-2024-52799 | 1 Argoproj | 1 Argo-helm | 2026-04-15 | 8.3 High |
| Argo Workflows Chart is used to set up argo and its needed dependencies through one command. Prior to 0.44.0, the workflow-role has excessive privileges, the worst being create pods/exec, which will allow kubectl exec into any Pod in the same namespace, i.e. arbitrary code execution within those Pods. If a user can be made to run a malicious template, their whole namespace can be compromised. This affects versions of the argo-workflows Chart that use appVersion: 3.4 and above, which no longer need these permissions for the only available Executor, Emissary. It could also affect users below 3.4 depending on their choice of Executor in those versions. This only affects the Helm Chart and not the upstream manifests. This vulnerability is fixed in 0.44.0. | ||||