Export limit exceeded: 413957 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413957 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98979 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: refuse an automount below a mount that is in no namespace It's possible to add autmounts even when the parent mount isn't in the mount namespace of the caller. The only requirement we have is that the parent mount namespace must not be NULL, i.e., unmounted. Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes that trivially true. So that passes the test and attach_recursive_mnt() accepts that as a mount point and funny enough, count_mounts() dereferences MNT_NS_INTERNAL. The problem is it is an error pointer... So we can reach this in userspace via fanotify. A filesystem mark on the lower filesystem of an overlay reports paths on the layer clone and reading the event hands out a descriptor on it. For example with debugfs as the lower layer it goes kaboom: openat(evfd, "tracing", O_DIRECTORY) Oops: general protection fault KASAN: null-ptr-deref in range [0x1d0-0x1d7] RIP: 0010:count_mounts+0x35/0x200 attach_recursive_mnt finish_automount And since that sleeping beauty happens under namespace_sem held for writing every mount operation on the system blocks from then on. Congrats. Use is_mounted() instead which rejects unmounted and internal mounts alike. The open fails with EINVAL just as it did before clone_private_mount() used MNT_NS_INTERNAL. | ||||
| CVE-2026-98981 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: unhash a dentry before detaching the mounts on it unlink(), rmdir() and rename() remove the entry from the filesystem, call detach_mounts() on the entry with the inode locked and then call d_delete() once the inode is unlocked. The thing is that between detach_mounts() and d_delete() the dentry is still hashed and positive. But after detach_mounts() nothing covers the dentry anymore. A lookup that finds this dentry in the dcache can uncover what the mounts hid. That's a problem when unlinking files or directories that are mountpoints in other mount namespaces. Everybody who had the underlying entry covered can race the detach_mount() call until d_delete() has run. The race window isn't all that small. It encompasses namespace_unlock() with a full synchronize_rcu_expedited() grace period and the inode_unlock() of the entry. In my experiments three walkers that kept trying read an overmounted file in 11938 of the 16140 unlinks that removed its mountpoint from a bind mount of the filesystem within a minute. Fun fact, d_invalidate() has the same ordering problem but gets it right. It unhashes the dentry first and detaches the mounts afterwards. Let's do the same in __detach_mounts(): - A lookup that hasn't found the dentry yet misses it in the dcache and waits for the directory lock that the caller holds until the name is gone for good. - A lockless lookup that found it already fails the mount_lock check while the dentry still counts as a mountpoint and the d_seq check once it doesn't, and retries. This fixes the lockless path. We still need to fix the reference count lookup in a follow-up patch. So d_drop() the dentry. The dentry stays positive and held but can't be found anymore. Then proceed with the detach and unlink. Reproducer: The reads were counted with the program below, three walkers for 60 s in a VM with 4 CPUs. The race window is stretched with the debug patch pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it found a mountpoint dentry and before its mounts are crossed. fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts() and d_delete(). // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against lookups that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include <errno.h> #include <fcntl.h> #include <pthread.h> #include <stdatomic.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <sys/mount.h> #include <sys/stat.h> #include <sys/syscall.h> #include <linux/openat2.h> #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 wh ---truncated--- | ||||
| CVE-2026-98983 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: unshare: don't drop active namespace references that were never taken Active references on the namespaces of an nsproxy are taken when the nsproxy is installed into a task in switch_task_namespaces() and copy_namespaces() and dropped again by put_nsproxy() through deactivate_nsproxy(). But ksys_unshare() calls put_nsproxy() on an nsproxy that was never installed when set_cred_ucounts() fails. The new namespaces of that nsproxy go from zero to minus one and the namespaces shared with the caller lose a reference that belongs to the nsproxy the caller keeps using: WARNING: kernel/nscommon.c:171 at __ns_ref_active_put+0x1cd/0x230 nsproxy_ns_active_put deactivate_nsproxy ksys_unshare Afterwards the namespaces the caller lives in aren't listed by listns() anymore. set_cred_ucounts() only fails when alloc_ucounts() can't allocate and it only allocates when the real uid of the caller differs from its effective uid. Commit cefd55bd2159 ("nsproxy: fix free_nsproxy() and simplify create_new_namespaces()") separated the two cases on purpose. nsproxy_free() frees an nsproxy that was prepared but never installed and that's what a failed setns() uses in put_nsset(). Export it and use it for a failed unshare() as well. | ||||
| CVE-2026-115883 | 2026-10-23 | N/A | ||
| LangGraph checkpoint savers provide Postgres- and SQLite-backed state persistence for LangGraph workflows and agents. Prior to langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2, PostgresStore, AsyncPostgresStore, SqliteStore, and AsyncSqliteStore flatten namespace labels with ".".join(namespace), while BaseStore validates labels only for put and aput. Unvalidated dotted labels passed through get, search, delete, list_namespaces, their asynchronous equivalents, or direct batch and abatch operations can resolve to another tenant's stored namespace, allowing cross-namespace reads, overwrites, or deletion. InMemoryStore is not affected because it compares namespace tuples. This issue is fixed in langgraph-checkpoint-postgres 3.1.3 and langgraph-checkpoint-sqlite 3.1.2. | ||||
| CVE-2026-12155 | 1 Ibm | 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images | 2026-10-23 | 6.5 Medium |
| IBM MQ could allow an authenticated attacker to cause a denial of service by sending specially crafted multicast status messages that trigger a NULL pointer dereference. | ||||
| CVE-2026-57849 | 2026-10-23 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-12148 | 1 Ibm | 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images | 2026-10-23 | 7.5 High |
| IBM MQ Operator could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to unrestricted Java deserialization in the MQ Classes for Java. | ||||
| CVE-2026-11831 | 1 Ibm | 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images | 2026-10-23 | 5.4 Medium |
| IBM MQ could allow an authenticated attacker to cause a limited denial of service and obtain very limited information about process memory layout due to an out-of-bounds read when processing a specially crafted client request. | ||||
| CVE-2026-79855 | 2026-10-23 | 9.8 Critical | ||
| An authentication bypass vulnerability in the SSH daemon of AOS-8 allows an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to gain administrative privileges leading to complete compromise of the AOS-8 host. | ||||
| CVE-2026-79856 | 2026-10-23 | 9.8 Critical | ||
| A buffer overflow vulnerability exists in the PAPI protocol of AOS-8 that could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative access, modify system configurations, and access or manipulate sensitive data. | ||||
| CVE-2026-79857 | 2026-10-23 | 9.8 Critical | ||
| There is a command injection vulnerability in the PAPI protocol (Aruba's access point management protocol) of AOS-8 that could lead to unauthenticated remote code execution by sending specially crafted packets to the affected UDP port. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. | ||||
| CVE-2026-79858 | 2026-10-23 | 9.8 Critical | ||
| An unauthenticated SQL injection vulnerability exists in the PAPI protocol in AOS-8. Successful exploitation could allow an unauthenticated remote attacker to obtain and modify sensitive information in the underlying database and to interrupt the normal operation of the affected service. | ||||
| CVE-2026-95706 | 1 Hpe | 1 Aos | 2026-10-23 | 7.2 High |
| Command injection vulnerabilities in the affected interface of AOS-8 could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute commands with the privileges of the impacted mechanism on the underlying operating system. | ||||
| CVE-2026-48378 | 1 Adobe | 5 C2pa, C2pa-web, C2patool and 2 more | 2026-10-23 | 5.3 Medium |
| CAI Content Credentials is affected by an Improper Input Validation vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized limited write access. Exploitation of this issue does not require user interaction. | ||||
| CVE-2026-105390 | 1 Openvpn | 1 Ovpn-dco-win | 2026-10-23 | N/A |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. | ||||
| CVE-2026-99045 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ibmveth: h_free logical LAN on open-fail after register ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped. | ||||
| CVE-2026-99046 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak on error descriptor When the error bit is set in the RX completion descriptor, the buf_state and its attached buffer should be freed. In the case of AF_XDP ZC, the XSK buffer was not freed, leading to a leak. This issue was caught by LLM. | ||||
| CVE-2026-99047 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak when rings are stopped GVE does not free XSK buffers when resetting ring state as a part of stopping queues. This causes all XSK buffers which are posted to the NIC to be leaked. Free XSK buffers attached to an allocated buf_state when stopping rings. This issue was hit in production. | ||||
| CVE-2026-99048 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix napi_disable deadlock when attempting to disable XSK pools When disabling XSK pools, GVE calls the unlocked versions of napi_disable and napi_enable. However, the netdev lock has already been acquired before ndo_bpf is called because GVE supports queue management ops. Calling the unlocked versions of napi_disable/enable results in a deadlock when attempting to disable XSK pools, as the thread attempts to re-acquire a lock it already holds. Update the NAPI calls to use the locked versions. This issue was found in production. | ||||
| CVE-2026-99050 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix race when arming the IRQ poll worker gpio_mpsse_irq_enable() arms the poll worker before publishing it: schedule_work() runs before the worker is added to priv->workers. If gpio_mpsse_disconnect() walks the list in that window it misses the worker, and once disconnect returns, the USB core frees mpsse_priv while the orphaned gpio_mpsse_poll() work keeps accessing it, causing a use-after-free. Fix this by publishing and arming the worker in one irq_spin critical section. Teardown walks the same list under irq_spin, so a worker found on the list is guaranteed to be armed, and cancel_work_sync() handles it whether it is queued or running. A worker armed after the disconnect walk would still be missed, so also set a new priv->dying flag under irq_spin before the teardown walk, and check it in the same critical section, freeing it via kfree_rcu() instead when the device is going away, since kfree() would be called with the IRQ core's raw spinlock held and may sleep on PREEMPT_RT. schedule_work() is safe to call with irq_spin held, and the next probe gets a fresh mpsse_priv, so the flag never needs to be cleared. This issue was found by an in-house static analysis tool. | ||||