Export limit exceeded: 101067 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (101067 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80935 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block copy from the address reported by the MCU response (event->addr, a device-controlled __le32) and clamps only the copy length, never the destination offset into dev->mt76.eeprom.data. A malicious or malfunctioning device can report an arbitrary address and drive an out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-80933 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate default EEPROM firmware size The default EEPROM firmware is parsed and copied as a full EEPROM without checking its length. A truncated file can make the driver read beyond the firmware buffer during variant validation or the fallback copy. Reject files shorter than MT7996_EEPROM_SIZE before parsing or copying the firmware. | ||||
| CVE-2026-80932 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: flush works in dependency order virtio_vsock_remove() stops the virtqueues and then flushes each work item before freeing the enclosing virtio_vsock. The current order does not account for dependencies between those items: tx_work may queue send_pkt_work, and send_pkt_work may queue rx_work. In particular, send_pkt_work can set restart_rx and release tx_lock. The remove path can then stop the queues and flush rx_work before send_pkt_work queues it. Although the later send_pkt_work flush waits for that producer to finish, nothing waits for the newly queued rx_work, so kfree(vsock) can race with it. KASAN reported: BUG: KASAN: slab-use-after-free in virtio_transport_rx_work+0x487/0x4b0 Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtio_transport_rx_work+0x487/0x4b0 process_one_work+0x688/0x1120 worker_thread+0x45b/0xd10 Allocated by task 1: virtio_vsock_probe+0xef/0x6b0 Freed by task 84: kfree+0x131/0x3c0 virtio_vsock_remove+0xd1/0x100 Flush the works in producer-to-consumer order. virtio_vsock_vqs_del() has already disabled the queue callbacks and cleared the run flags, so after tx_work and send_pkt_work are drained, no source remains that can queue rx_work after its flush. | ||||
| CVE-2026-80931 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: w1: ds28e17: reject an oversize length on an I2C block read w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the device. The downstream slave puts a length byte in buf[0]. The driver then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read run past it, up to about 222 bytes out of bounds. The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That check runs after master_xfer returns. By then the write is already done. i2c-algo-bit rejects an oversize length before it copies, and returns -EPROTO. Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the same way i2c-algo-bit does. | ||||
| CVE-2026-80928 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smack: fix cred UAF in smack_file_send_sigiotask() When inspecting the credentials of another task, objective credentials (->real_cred, accessed with __task_cred()) must always be used. Accessing ->cred on a non-current task is forbidden unless that task is being created or destroyed; a task is allowed to change its own ->cred pointer with no synchronization, and changing ->cred should only affect the current syscall. smack_file_send_sigiotask() was accessing both sets of credentials: First tsk->cred, then __task_cred(tsk). Fix it, always access the objective credentials here. I have tested that this bug can lead to a KASAN-reported UAF of struct cred in smack_file_send_sigiotask(), and that this fix prevents the race. | ||||
| CVE-2026-80914 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise. | ||||
| CVE-2026-74565 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup(). | ||||
| CVE-2026-74378 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. | ||||
| CVE-2026-74371 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | ||||
| CVE-2026-74334 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | ||||
| CVE-2026-72255 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst The br_netfilter fake rtable is embedded in struct net_bridge and is attached to bridged packets with skb_dst_set_noref(). If such a packet is queued to NFQUEUE, __nf_queue() upgrades that fake dst with skb_dst_force(). At that point the queued skb can hold a real dst reference after bridge teardown has started. The problem is not that every bridged packet needs its own dst reference. The problem is that NFQUEUE can keep the bridge private fake dst alive after unregister begins. Fix this by keeping the bridge fake dst model unchanged and pinning the bridge master device only while the packet sits in NFQUEUE. Record the bridge device in nf_queue_entry when the queued skb carries a bridge fake dst, take a device reference for the queue lifetime, and drop it when the queue entry is freed. Also make sure queued entries are reaped when that bridge device goes down, and drop the redundant nf_bridge_info_exists() test from the fake dst detection. This keeps netdev_priv(br->dev) alive until verdict completion, so the embedded fake rtable and its metrics backing storage cannot be freed out from under dst_release(). It also avoids the constant refcount bump and avoids using ipv4-specific dst helpers for IPv6 bridge traffic. | ||||
| CVE-2026-64210 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: <IRQ> mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 | ||||
| CVE-2026-64058 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_folio() to wait on writeback Fix netfs_read_folio() to wait for an ongoing writeback to complete so that it can trust the dirty flag and whatever is attached to folio->private (folio->private may get cleaned up by the collector before it clears the writeback flag). | ||||
| CVE-2026-64031 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix managed cache race for unaligned extents After unaligned compressed extents were introduced, the following race could occur: [Thread 1] [Thread 2] (z_erofs_fill_bio_vec) <handle a Z_EROFS_PREALLOCATED_FOLIO folio> ... filemap_add_folio (1) (z_erofs_bind_cache) <the same folio is found..> .. .. folio_attach_private (2) filemap_add_folio (3) again Since (1) is executed but (2) hasn't been executed yet, it's possible that another thread finds the same managed folio in z_erofs_bind_cache() for a different pcluster and calls filemap_add_folio() again since folio->private is still Z_EROFS_PREALLOCATED_FOLIO. Fix this by explicitly clearing folio->private before making the folio visible in the managed cache so that another pcluster can simply wait on the locked managed folio as what we did for other shared cases [1]. This only impacts unaligned data compression (`-E48bit` with zstd, for example). [1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") was originally introduced to handle crafted overlapped extents, but it addresses unaligned extents as well. | ||||
| CVE-2026-53250 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xsk: cache csum_start/csum_offset to fix TOCTOU in xsk_skb_metadata() The TX metadata area resides in the UMEM buffer which is memory-mapped and concurrently writable by userspace. In xsk_skb_metadata(), csum_start and csum_offset are read from shared memory for bounds validation, then read again for skb assignment. A malicious userspace application can race to overwrite these values between the two reads, bypassing the bounds check and causing out-of-bounds memory access during checksum computation in the transmit path. Fix this by reading csum_start and csum_offset into local variables once, then using the local copies for both validation and assignment. Note that other metadata fields (flags, launch_time) and the cached csum fields may be mutually inconsistent due to concurrent userspace writes, but this is benign: the only security-critical invariant is that each field's validated value is the same one used, which local caching guarantees. | ||||
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | ||||
| CVE-2026-53098 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix use-after-free bugs in mt7915_mac_dump_work() When the mt7915 pci chip is detaching, the mt7915_crash_data is released in mt7915_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7915_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7915_pci_remove() | mt7915_sys_recovery_set() mt7915_unregister_device() | mt7915_reset() mt7915_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7915_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7915_unregister_device() to synchronize with any pending or executing dump work. | ||||
| CVE-2026-53078 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg, the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the destination register in the !fullsock / !locked_tcp_sock path. Both macros borrow a temporary register to check is_fullsock / is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with a request_sock), dst_reg should be zeroed but is not, leaving the stale ctx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer. Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp. | ||||
| CVE-2026-46090 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix peer runtime UAF during format-change stop loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit. | ||||
| CVE-2026-23448 | 1 Linux | 1 Linux Kernel | 2026-09-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. | ||||