Export limit exceeded: 399925 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399925 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93252 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix circular locking dependency in ocfs2_init_acl() A lockdep warning indicates a circular locking dependency between `&oi->ip_xattr_sem` and `&journal->j_trans_barrier`: WARNING: possible circular locking dependency detected is trying to acquire lock: (&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0 fs/ocfs2/acl.c:367 but task is already holding lock: (&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700 fs/ocfs2/journal.c:369 The deadlock involves two code paths: Path 1 (setxattr) where `ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a transaction, which acquires `j_trans_barrier` (read); and Path 2 (mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier` read) and then calls `ocfs2_init_acl()`, which attempts to acquire `ip_xattr_sem` (read) on the parent directory to retrieve the default ACL. Because rw_semaphores are subject to writer priority, a pending writer on `j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to block, while Path 2 is blocked waiting for Path 1 to release `ip_xattr_sem`. The patch fixes the lock ordering by precomputing the ACL state before starting the OCFS2 transaction, while preserving POSIX ACL storage semantics and the existing inode/security initialization order. By reading the parent directory's default ACL and preparing the new inode's ACLs outside the transaction, `ip_xattr_sem` is always acquired before `j_trans_barrier`. `struct ocfs2_acl_state` encapsulates the prepared ACL state, while `ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`. `ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed state, removing internal `ip_xattr_sem` acquisition and redundant disk reads. Additionally, remove the `ip_xattr_sem` acquisition from `ocfs2_xattr_set_handle()`. This function is only used while initializing a new inode that has not yet been inserted into the inode hash or attached to a dentry, meaning there is no risk of concurrent access and the lock is unnecessary. | ||||
| CVE-2026-93253 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/isolation: Defer freeing of cpumask memblock memory to initcall When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock: warn when freeing reserved memory before memory map is initialized"), the following warning was hit when there was a "nohz_full" kernel boot parameter. Cannot free reserved memory because of deferred initialization of the memory map WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0 : Call Trace: <TASK> memblock_phys_free+0xcb/0x100 housekeeping_init+0x14c/0x170 start_kernel+0x207/0x450 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0xda/0xe0 common_startup_64+0x13e/0x141 </TASK> IOW, we shouldn't free memblock allocated memory so early in the boot process when memory map isn't fully initialized in deferred_init_memmap(). Fix it by saving the housekeeping cpumask memblock memory to be freed into a llist free list in housekeeping_init() and add a new housekeeping_late_init() helper to defer the actual freeing of memblock memory to when initcall's are being processed. The cpumask memblock memory is treated as a llist_node with the size of a "long" type which is also smallest cpumask size that can be allocated. The non-atomic version of the llist APIs are used as there is no contention. This commit depends on the presence of commit 7c2eee9c1367 ("memblock: don't touch memblock arrays when memblock_free() is called late") to prevent a KASAN UAF bug report [1]. [1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/ | ||||
| CVE-2026-93257 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: block: handle nogenerate/noverify properly in fs-integrity Check the BIP_CHECK flags before generating or verifying PI information, otherwise this can be incorrectly called for non-PI metadata and cause generation of incorrect metadata and crashed in the verification handler. The new behavior matches that of the block layer auto-generated metadata. | ||||
| CVE-2026-93259 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/irq: Fix missing r2 clobber in PCREL inline assembly In CONFIG_PPC_KERNEL_PCREL mode, r2 is no longer reserved for the TOC pointer and is available as a caller-saved register [0]. Both call_do_irq() and call_do_softirq() use inline assembly to call functions with stack switching, but fail to list r2 in their clobber lists. This causes the compiler to assume r2 is preserved across these calls, leading to register corruption when the called functions (__do_irq and __do_softirq) clobber r2. As a result of this kernel crash during interrupt handling is seen and the kernel fails to boot: BUG: Unable to handle kernel data access on write at 0xc000000404697638 Faulting instruction address: 0xc0000000000181ec Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000181ec] __do_IRQ+0x6c/0xc0 With older GCC, the compiler would conservatively allocate callee-saved registers (like r31) for values spanning function calls, accidentally avoiding the bug: <__do_IRQ>: 00 00 00 60 nop a6 02 08 7c mflr r0 f8 ff e1 fb std r31,-8(r1) f0 ff c1 fb std r30,-16(r1) 2d 03 10 06 pla r31,53297316 ... 3d e8 ff 4b bl c0000000000165ac <__do_irq> 00 00 21 e8 ld r1,0(r1) 28 00 4d e9 ld r10,40(r13) 40 00 21 38 addi r1,r1,64 2a f9 aa 7f stdx r29,r10,r31 With newer GCC 14, the compiler uses r2 for such values, exposing the missing clobber specification: <__do_IRQ>: 00 00 00 60 nop a6 02 08 7c mflr r0 f0 ff c1 fb std r30,-16(r1) f8 ff e1 fb std r31,-8(r1) 29 02 10 06 pla r2,36252592 # c0000000022aadc0 <__irq_regs> ... 85 dc ff 4b bl c000000000015ee0 <__do_irq> 00 00 21 e8 ld r1,0(r1) 28 00 2d e9 ld r9,40(r13) 30 00 21 38 addi r1,r1,48 2a 11 c9 7f stdx r30,r9,r2 Fix this by adding r2 to the clobber list for both call_do_irq() and call_do_softirq() when CONFIG_PPC_KERNEL_PCREL is enabled. [0]: https://www.mail-archive.com/gcc-patches@gcc.gnu.org/msg313226.html | ||||
| CVE-2026-93260 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: propagate IPI init errors to prevent use-after-free When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails), the error path frees the global xive_ipis array. However, xive_smp_probe() previously ignored this failure and proceeded to call xive_setup_cpu_ipi(), which dereferences the already-freed xive_ipis pointer -- a use-after-free. Now that xive_smp_probe() returns int (previous patch), propagate the error from xive_init_ipis() and xive_setup_cpu_ipi() through xive_smp_probe(). Check the return value in both pnv_smp_probe() and pSeries_smp_probe() so that IPI setup is aborted cleanly on failure, avoiding the use-after-free. | ||||
| CVE-2026-93264 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk and is propagated to the device, causing the device to see the chunk as empty and reject the memory registration. Fix the calculation so it will be performed only if the number of pages isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in the above loop correctly. Also prevent out-of-bounds reach in the chunks array in such scenario. | ||||
| CVE-2026-93265 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node DSP3 has an integrated Ethernet MAC Endpoint which has its own set of config registers for configuring settings such as ASPM. The Endpoint device has two physical functions and those two functions share the same settings. Parse the Endpoint node under DSP3 instead of parsing both functions. The existing parsing logic also has one OOB issue as parsing both functions will result in accessing past the tc9563_pwrctrl->cfg array. | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93274 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: bcm2835: Don't remove an unregistered GPIO chip If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure | ||||
| CVE-2026-93279 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown The TX cleanup tasklet can be scheduled by the watchdog IRQ handler to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in the queue which might run after the cvm_oct_remove() frees net_device structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it iterates cvm_oct_device[] which is an array of netdevice pointers. Add tasklet_kill() after free_irq() to ensure the tasklet is no longer scheduled or running before teardown proceeds. | ||||
| CVE-2026-93283 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix device_register() error path When device_register() fails in i3c_master_register_new_i3c_devs(), put_device() is called to drop the reference taken by device_register(). That drops the last reference, so the device's release callback i3c_device_release() runs and frees the i3c_device. Two problems follow from that: i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because desc->dev->desc still points back at the descriptor. Clear it before calling put_device(). After put_device() frees the i3c_device, desc->dev is left pointing at freed memory, so clear desc->dev as well. That prevents, for example, i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and dereferencing it. | ||||
| CVE-2026-98090 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device. | ||||
| CVE-2026-39708 | 2 Uicore, Wordpress | 2 Uicore Elements, Wordpress | 2026-09-25 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in UiCore UiCore Elements uicore-elements allows Stored XSS.This issue affects UiCore Elements: from n/a through 1.3.17. | ||||
| CVE-2025-64289 | 3 Premmerce, Woocommerce, Wordpress | 4 Premmerce, Product Search For Woocommerce, Woocommerce and 1 more | 2026-09-25 | 5.9 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Premmerce Premmerce Product Search for WooCommerce premmerce-search allows Stored XSS.This issue affects Premmerce Product Search for WooCommerce: from n/a through 2.2.7. | ||||
| CVE-2026-93284 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: dma-unmap pages before handling migration errors drm_pagemap_migrate_unmap_pages() relies on the pages array to determine which pages require DMA unmapping. However, drm_pagemap_migration_unlock_put_pages() clears the array as part of its cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page information if it is called afterward. Call drm_pagemap_migrate_unmap_pages() before drm_pagemap_migration_unlock_put_pages() so the pages array remains valid during DMA unmapping. | ||||
| CVE-2026-97417 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() The timestamp-only fast path dereferences the option stream as *(__be32 *)ptr, which assumes 4-byte alignment that the TCP option stream does not guarantee. Use get_unaligned_be32() instead, which reads the value safely and already returns host byte order, so the htonl() on the comparison constant can be dropped. This matches the existing get_unaligned_be32() use later in the same function. | ||||
| CVE-2026-81792 | 2 Multivendorx, Wordpress | 2 Product Catalog Enquiry For Woocommerce By Multivendorx, Wordpress | 2026-09-25 | 6.5 Medium |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. | ||||
| CVE-2026-93285 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: embed f2fs_gc_kthread in f2fs_sb_info Instead of allocating f2fs_gc_kthread dynamically, embed it in f2fs_sb_info. This simplifies lifetime management and prepares for fixing race conditions during teardown. - __sbi_store - remount|shutdown - f2fs_stop_gc_thread - access sbi->gc_thread - sbi->gc_thread = NULL - access sbi->gc_thread->f2fs_gc_task | ||||
| CVE-2026-52853 | 1 Docmost | 1 Docmost | 2026-09-25 | 5.2 Medium |
| Docmost is open-source collaborative wiki and documentation software. Prior to 0.90.1, an authenticated workspace ADMIN can use the workspace invitation flow to invite an external email address with the OWNER role because the role ceiling does not prevent ADMIN users from granting privileges above their own. When the invitation is accepted, the new account receives OWNER-level permissions, allowing the ADMIN to create a backdoor OWNER account or promote a colluding external user to the workspace's highest privilege level. This issue is fixed in version 0.90.1. | ||||
| CVE-2026-97057 | 1 Noderedis | 1 Redis-parser | 2026-09-25 | 7.5 High |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. | ||||