Export limit exceeded: 410159 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410159 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-84178 | 2026-10-19 | 6.1 Medium | ||
| Cross-Site Request Forgery (CSRF) vulnerability in Apache Camel OAuth component. This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1. The authorization code callback did not carry a state parameter binding it to the authorization request that started the flow, and the callback did not verify one. An authorization code obtained in any browser could therefore be redeemed at the callback and associated with whichever session presented it, which is login cross-site request forgery: a victim can be silently signed in as an identity the attacker controls, so that actions the victim then performs, and data they then submit, land in the attacker's account. The same unvalidated callback handling also allowed the post-authentication redirect target to be influenced, giving an open redirect from a trusted origin. The state check runs before the authorization code is redeemed, so these paths are reachable without any interaction with the identity provider. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The authorization request now issues a state value bound to the session, and the callback rejects a request whose state is absent or does not match, stopping the route with a 400 response. For deployments that cannot upgrade immediately, terminate the authorization code flow in a component that performs its own state binding rather than relying on the Camel callback. Note that after upgrading, a deployment behind a proxy that drops or rewrites the callback query string will begin to see 400 responses, because the state parameter must survive the round trip. | ||||
| CVE-2026-112105 | 1 Passy | 1 Passy | 2026-10-19 | 3.7 Low |
| A vulnerability has been found in GlitterWare Passy up to 1.10.1. The affected element is the function MyHttpOverrides in the library lib/main.dart of the component TLS Handler. Such manipulation leads to improper certificate validation. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is described as difficult. Upgrading to version 1.10.2 is sufficient to fix this issue. The name of the patch is 3d48df7cce05e39fa4de1e42768492307f26882e. The affected component should be upgraded. | ||||
| CVE-2026-84176 | 2026-10-19 | 6.5 Medium | ||
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. | ||||
| CVE-2026-83531 | 2026-10-19 | 8.8 High | ||
| Improper Control of Generation of Code ('Code Injection'), Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel. This issue affects Apache Camel: from 4.4.0 before 4.18.5, from 4.19.0 before 4.22.1. The dynamic-router-control endpoint, introduced in 4.4.0, lets routing participants manage Dynamic Router subscriptions by sending control messages. When it handled a subscribe or update request, DynamicRouterControlProducer took the subscription predicate and the name of the language used to compile it from the incoming message, either from the predicate and expressionLanguage fields of a DynamicRouterControlMessage body or from the CamelDynamicRouterPredicate and CamelDynamicRouterExpressionLanguage headers. DynamicRouterControlService then resolved that language from the CamelContext and compiled the expression into a Predicate, with no allow-list and no opt-in. The compiled predicate was added to the channel's rule base and evaluated against every exchange routed through the corresponding dynamic-router endpoint for as long as the subscription existed. A route that forwards messages from an external transport to the control endpoint, as shown in the component documentation for routing participants in other JVMs or applications, therefore let any actor able to send a message on that transport supply an expression of their choosing, which was evaluated with the privileges of the Camel process. Any expression language available on the classpath could be selected, including the simple language, which is always present and was the default on the header path, so removing optional expression languages from the classpath did not prevent the issue. Exploitation requires the ability to send a message on a transport whose route forwards it to a dynamic-router-control endpoint; no other authentication or user interaction is needed. Releases before 4.4.0 are not affected, because their control channel took predicate expressions only from the endpoint URI configured by the route author. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. After upgrading, a control message that carries a predicate expression or an expression language is rejected unless the new allowPredicateFromMessage option is enabled on the dynamic-router-control endpoint; enable it only when every sender of control messages is trusted. For deployments that cannot upgrade immediately, do not forward messages from untrusted or shared transports to a dynamic-router-control endpoint. Where control messages must cross such a transport, authenticate the sender and make sure the predicate and expression language of each subscription are set by the route rather than taken from the incoming message, for example by removing the CamelDynamicRouterPredicate and CamelDynamicRouterExpressionLanguage headers and clearing the predicate and expressionLanguage fields of a DynamicRouterControlMessage before it reaches the endpoint. Removing optional expression languages from the classpath is not a sufficient workaround. As defence in depth, restrict who can send to the transports that feed the control endpoint, and on 4.23.0 and 4.22.1 set the allowedSchemes option of the dynamic-router endpoint to limit which endpoints a subscription's destinationUri may name. | ||||
| CVE-2026-80344 | 2026-10-19 | 8.2 High | ||
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. | ||||
| CVE-2026-80343 | 2026-10-19 | 8.2 High | ||
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding. | ||||
| CVE-2026-80312 | 2026-10-19 | 8.2 High | ||
| Improper Authentication vulnerability in Apache Camel OAuth component. This issue affects Apache Camel: from 4.11.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-oauth processors that guard a route did not stop the exchange when authentication could not be completed. Where a failure to establish an authenticated session should have terminated routing and returned an error to the caller, the processors fell through and returned control to the route, so the request continued to the protected endpoint as though authentication had succeeded. The effect is a fail-open authentication guard: an unauthenticated caller reached whatever the route did next. The condition is reached on the ordinary request path of a route configured to require OAuth, and needs no special configuration or prior access on the caller's part. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The processors now stop the exchange and set the appropriate error status whenever an authenticated session cannot be established, so a failed authentication no longer reaches the protected part of the route. For deployments that cannot upgrade immediately, place an explicit authorization check after the OAuth processor rather than relying on it to halt the exchange, and verify that the route stops on failure. | ||||
| CVE-2026-79986 | 2026-10-19 | 7.4 High | ||
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel Azure Files component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the azure-files scheme. Its consumer derives from the same RemoteFileConsumer base class and composed the remote path through a plain concatenation helper, so it inherited the same unconstrained resolution. Reaching it requires a listing name that is not a single path segment, which the Azure Files REST service does not normally return; the exposure was corrected on the same basis as the other remote-file consumers rather than from a demonstrated proof of concept against this scheme. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream. | ||||
| CVE-2024-2182 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-19 | 6.5 Medium |
| A flaw was found in the Open Virtual Network (OVN). In OVN clusters where BFD is used between hypervisors for high availability, an attacker can inject specially crafted BFD packets from inside unprivileged workloads, including virtual machines or containers, that can trigger a denial of service. | ||||
| CVE-2026-19654 | 2 Redhat, Rsyslog | 6 Enterprise Linux, Enterprise Linux Eus, Rhel E4s and 3 more | 2026-10-19 | 7.5 High |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. | ||||
| CVE-2026-99999 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: validate checksum_start before completing checksum If a packet with bad checksum metadata gets into the ipv4 stack, skb_checksum_help can corrupt the network header and cause a bunch of mischief. This was discovered and reported by Paulos, and has been reporoduced by others independently since. We really shouldn't allow such packets in, but as a defence in depth measure, let's also check before we complete the checksum. A more complete validation at input is forthcoming, but needs more work. | ||||
| CVE-2026-98438 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case. | ||||
| CVE-2026-98437 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: fix runtime PM reference leaks Use pm_runtime_resume_and_get() in iris_enable_power_domains() to avoid leaking a runtime PM usage count on failure. Also ensure pm_runtime_put_sync() is always called in iris_disable_power_domains(), even when iris_opp_set_rate() fails, so runtime PM references remain balanced. | ||||
| CVE-2026-98435 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Use parent device for devres in altr_portb_setup() Anchor the devres group and the devm-managed IRQ requests in altr_portb_setup() to the actual parent device (device->edac->dev) instead of the embedded struct device inside the copied per-port altr_edac_device_dev. This keeps devres_open_group(), devm_request_irq(), devres_remove_group() and devres_release_group() all referring to the same long-lived device so the group and the resources allocated inside it are torn down together. | ||||
| CVE-2026-98434 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysctl: Check range in proc_dointvec_ms_jiffies_minmax Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions") incorrectly removed. | ||||
| CVE-2026-98433 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix secure device page leak on uv_page_in() failure In kvmppc_svm_page_in(), if uv_page_in() fails after kvmppc_uvmem_get_page() has succeeded, the secure device page is never released. kvmppc_uvmem_get_page() sets a bit in kvmppc_uvmem_bitmap, allocates a kvmppc_uvmem_page_pvt struct, marks the GFN as KVMPPC_GFN_UVMEM_PFN, and calls zone_device_page_init() which sets refcount=1 and locks the page. The subsequent goto out_finalize skips the *mig.dst assignment, so migrate_vma_finalize() is a no-op for the page, and none of those resources are ever reclaimed. Each occurrence permanently consumes one entry from the firmware-bounded secure memory pool (kvmppc_uvmem_bitmap), leaks pvt, and leaves the GFN marked as secure — making it unusable for the lifetime of the VM. The twin __kvmppc_svm_page_out() already handles the analogous uv_page_out() failure correctly with unlock_page(dpage); __free_page(dpage). Apply the same pattern here: unlock_page() followed by put_page(), which chains through free_zone_device_folio() into kvmppc_uvmem_folio_free() to clear the bitmap bit, free pvt, and reset the GFN state. Reachable whenever uv_page_in() returns an error (e.g. UV pool exhaustion) on any POWER9/10 + Ultravisor/PEF system. | ||||
| CVE-2026-94229 | 2026-10-19 | 5.3 Medium | ||
| The TrueBooker WordPress plugin before 1.3.0 does not verify that the requester owns a booking before rendering its confirmation summary, allowing unauthenticated attackers to enumerate booking identifiers and retrieve the personal information of customers who booked an appointment, as well as invalidate the customer's own confirmation link. | ||||
| CVE-2026-91046 | 2026-10-19 | 4.3 Medium | ||
| The ElementsReady Addons for Elementor WordPress plugin through 6.7.2 does not perform authorization checks that halt execution in several of its settings-save handlers, allowing users with subscriber-level access and above to overwrite the ElementsReady Addons for Elementor WordPress plugin through 6.7.2's stored settings, including its stored API credentials and its feature and template configuration. | ||||
| CVE-2026-86791 | 2026-10-19 | 5.3 Medium | ||
| The iPOSpays Payment Gateway for WooCommerce WordPress plugin before 1.4.7 does not verify that a payment was actually completed before recording an order as paid, allowing unauthenticated users to mark any unpaid order as paid and to rewrite its total. | ||||
| CVE-2026-74921 | 2026-10-19 | 6.8 Medium | ||
| The Document Gallery WordPress plugin through 5.1.1 does not sanitise or escape several gallery shortcode attributes before embedding them in a single-quoted HTML attribute in the rendered gallery markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when a higher privileged user views the content. | ||||