Export limit exceeded: 386839 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 96448 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (96448 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-7837 | 1 Firmanet | 1 Erp | 2026-09-04 | 8.2 High |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Firmanet Software ERP allows SQL Injection. This issue affects ERP: before 15.0.1. | ||||
| CVE-2026-80731 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. | ||||
| CVE-2026-80751 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: mfg: initialize prev_o in mtk_mfg_attach_dev() mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop, in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned at the end of the loop body. On that first iteration, evaluating prev_o reads an indeterminate value. If it is non-NULL, the condition dereferences a stale or invalid pointer, potentially faulting or incorrectly skipping the first OPP. Initialize prev_o to NULL. This matches the intent as well: there is no previous OPP to compare against on the first iteration. Found with Clang's -Wconditional-uninitialized. | ||||
| CVE-2026-85094 | 1 Canva | 1 Canva | 2026-09-04 | 8.8 High |
| The Canva Android App before 2.376.0 did not restrict the headers returned to an external origin running in a privileged WebView. A threat actor with control of the WebView could access a user’s session. | ||||
| CVE-2026-80736 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix bandwidth group reservation indexing Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly to index its local group_reserved[] array. The array currently has MAX_GROUPS entries, so its valid indices are 0 through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one element past the end, and the final group's reserved bandwidth is not included when the array is summed. Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS. | ||||
| CVE-2026-80741 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/log: Fix out-of-bounds read on empty message length drm_log_draw_kmsg_record() accesses s[len - 1] to strip the trailing newline, but len is unsigned int. If len is 0, the subtraction wraps to UINT_MAX, causing an out-of-bounds read. Add an early return when len is 0. | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80749 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/connector/hdmi: Fix out of bounds memory read A helper function was copying a given audio infoframe into the connector's copy but using the size of the destination (a generic target, sized to accept many different data blocks) not the source (a very specific type of data block). Thus, it was copying 60 bytes of data from a 28 byte allocation. Fix that by using the source size instead, together with a build bug on the source size actually being smaller than the destination. I hit this running KUnit tests under KASAN (while debugging something else entirely). In the real world, it seems unlikely to cause an actual problem. It is a read not a write so it can't corrupt any memory. However, it could potentially fall off the end of a page and cause an accvio bug. | ||||
| CVE-2026-85505 | 1 Freeipmi | 1 Freeipmi | 2026-09-04 | 7.5 High |
| ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer over-read in ipmi_oem_fujitsu_get_sel_entry_long_text in ipmi-oem/ipmi-oem-fujitsu.c when a BMC provides a short response, a different vulnerability than CVE-2026-50031 (which has different affected versions). | ||||
| CVE-2026-80752 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: psxpad-spi - set driver data before use psxpad_spi_suspend() retrieves the controller state with spi_get_drvdata(), but probe never stores it, so suspend dereferences a NULL pointer. Store it during probe. | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-75034 | 1 Suse | 1 Rancher | 2026-09-04 | 7.4 High |
| A flaw was found in Rancher Manager. The SAML assertion replay protection introduced by the fix for CVE-2026-44946 recorded consumed assertion IDs in a per-process cache, so each replica only detected replays that reached the same pod. In a high-availability deployment, an attacker holding a captured assertion could replay it once against every other replica to obtain additional authenticated sessions as the victim. This issue affects Rancher: before 2.15.1. | ||||
| CVE-2026-19582 | 2 Gnu, Redhat | 5 Binutils, Enterprise Linux, Hardened Images and 2 more | 2026-09-04 | 7.8 High |
| Red Hat Product Security has come to the conclusion that this CVE is false due to upstream security policy. | ||||
| CVE-2026-85390 | 2 Bluewave-labs, Bluewavelabs | 2 Checkmate, Checkmate | 2026-09-04 | 7.1 High |
| Checkmate through 3.11.0 omits the isAllowed role guard middleware on maintenance-window, notification, and check-deletion routes, allowing read-only users to perform administrative actions. Attackers with user-role sessions can create arbitrary maintenance windows to silence alerts, modify notification channels, and delete monitor check history to erase incident evidence. | ||||
| CVE-2026-84794 | 1 Craftcms | 1 Craft Cms | 2026-09-04 | 7.1 High |
| Craft CMS versions before 5.10.11 lack authorization checks in the assets/move-asset endpoint when force=1 is supplied. Authenticated users without peer asset permissions can move their own assets into other users' folders and force deletion of conflicting files, allowing unauthorized asset deletion and replacement. | ||||
| CVE-2026-84764 | 2 Nsquared, Wordpress | 2 Simply Schedule Appointments, Wordpress | 2026-09-04 | 8.8 High |
| Unauthenticated Cross Site Request Forgery (CSRF) in Simply Schedule Appointments <= 1.6.12.23 versions. | ||||
| CVE-2026-84484 | 1 Nasajpl | 1 Iondtn | 2026-09-04 | 7.5 High |
| ION-DTN versions before 4.2.0 contain an out-of-bounds read vulnerability in the decodeSdnv function that allows unauthenticated remote attackers to read memory by sending truncated SDNV values. Attackers can send a UDP datagram to the LTP link service input port with a truncated SDNV to trigger reads up to nine bytes past buffer boundaries and underflow byte counters. | ||||
| CVE-2026-84478 | 1 Wwbn | 1 Avideo | 2026-09-04 | 7.3 High |
| WWBN AVideo contains a path traversal vulnerability in the API get_api_login_code endpoint that allows unauthenticated attackers to delete arbitrary .log files by supplying directory traversal sequences in the code parameter. Attackers can exploit this to destroy audit logs and probe for file existence on the server, with the vulnerability enabling both file deletion and information disclosure about the filesystem. | ||||
| CVE-2026-84441 | 1 Piwigo | 1 Piwigo | 2026-09-04 | 7.3 High |
| A security vulnerability has been detected in Piwigo up to 16.3.0. Affected by this issue is some unknown functionality of the file i.php of the component Image Derivative Handler. The manipulation leads to path traversal. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-84374 | 1 Spartnernl | 1 Laravel-excel | 2026-09-04 | 7.5 High |
| Laravel Excel provides supercharged Excel exports and imports in Laravel. From 3.1.8 until 3.1.70, in src/Files/Disk.php the Maatwebsite\Excel\Files\Disk::copy() method resolves the caller-controlled $destination supplied through Excel::store(), $export->store(), or storeExcel() against the process working directory with realpath() instead of the configured filesystem disk. If the path names an existing writable file, Disk::copy() opens it with fopen() in rb+ mode and uses stream_copy_to_stream(), bypassing Flysystem path confinement and allowing an attacker whose application input controls the export path to overwrite arbitrary existing files with export content. The rb+ behavior creates a non-truncating overwrite and trailing bytes when the new export is shorter, and overwriting an executable PHP file can lead to remote code execution. This issue is fixed in version 3.1.70. | ||||