Export limit exceeded: 100163 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (100163 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89647 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its `nr_to_scan` budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (`count==0`) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns `-EAGAIN`, only to be queued again immediately. The dir-lease walk made this worse. When `expire_dir_lease` is `false` (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH` moves the dentry to the tail of the list and resets `di->time` via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN` requeue. Fix this in three steps: - Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is `false`. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via `STOP` at the first fresh lease). - Only return `-EAGAIN` from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (`count==0`). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (`count>0`) the reclaim path is unchanged and still retries via `-EAGAIN`. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in `/proc/lock_stat` (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated--- | ||||
| CVE-2026-89646 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix leaked inode reference on writeback abort at umount ceph_dirty_folio() takes a wrbuffer claim on each newly dirtied folio: it bumps i_wrbuffer_ref (taking an ihold() on the 0->1 transition) and attaches the snap_context to folio->private. That claim is released only by ceph_put_wrbuffer_cap_refs(), which for a submitted write runs from writepages_finish(). In ceph_submit_write(), if ceph_inc_osd_stopping_blocker() fails -- which happens during umount -- the request is aborted before submission: the already-collected folios are only redirtied and unlocked, so writepages_finish() never runs and the claim is leaked. redirty_page_for_writepage() -> folio_redirty_for_writepage() -> filemap_dirty_folio() sets PG_dirty directly and does not go through ->dirty_folio, so ceph_dirty_folio() is not re-entered to rebalance it. Because every subsequent writeback also fails the osd_stopping_blocker, i_wrbuffer_ref never returns to 0, the ihold() is never dropped, and the inode cannot be evicted: VFS: Busy inodes after unmount of ceph kernel BUG at fs/super.c:650! Release the orphaned claim in the abort path before redirtying, via ceph_undo_wrbuffer_claim(): detach the snap_context, drop the wrbuffer reference (letting i_wrbuffer_ref reach 0 and iput() the inode), and drop the snap_context reference -- i.e. do what writepages_finish() would have done for these never-submitted folios. Only the locked_pages entries are undone; folios still in the fbatch were never dirty-cleared by this call (folio_clear_dirty_for_io() is the ownership-transfer point, and a successful move NULLs the fbatch slot), so they hold no claim this call owns. | ||||
| CVE-2026-89641 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size() When the else branch of cifs_file_set_size() finds a writable file handle via find_writable_file(), it borrows tcon and server from the handle's tlink, attempts the handle-based set_file_size() RPC, and then releases the handle with cifsFileInfo_put(). If set_file_size() fails, execution falls through to the path-based fallback, which reuses the borrowed tcon and server under the "if (tcon == NULL)" guard. Since tcon is not NULL at that point, the guard is skipped. If cifsFileInfo_put() dropped the last reference on a tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE cleared, as happens during reconnection or session teardown), cifs_put_tlink() will have freed tcon; the subsequent set_path_size() call is then a use-after-free. Setting tcon = NULL after cifsFileInfo_put() causes the existing guard to take the cifs_sb_tlink() path, which acquires a fresh reference for the path-based operation or fails cleanly if the session is gone. | ||||
| CVE-2026-89639 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: use cifs_invalidate_cache() in cifs_do_truncate() for O_TRUNC cifs_do_truncate() is invoked from cifs_open() without i_rwsem, so it cannot use cifs_resize_file_locked() to perform a proper fscache cookie resize. Instead, add cifs_invalidate_cache() after cifs_setsize(). cifs_invalidate_cache() calls fscache_invalidate(), which works without holding i_rwsem: it unconditionally increments inval_counter and sets FSCACHE_COOKIE_NO_DATA_TO_READ, ensuring that stale cached data is not served once the cookie is later activated by fscache_use_cookie(). Truncation to zero leaves no valid cached data, making invalidation the correct semantic here. | ||||
| CVE-2026-89638 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit survives the write. This is a security issue: on local filesystems the setuid bit is stripped when a file is written, but over these cifs.ko mounts the bit persists on the server, potentially allowing an unexpected privilege escalation on subsequent execution. Fix this in two places: 1. cifs_setattr_nounix(): only take the "skip mode change" shortcut when the mode is emulated via the DOS read-only attribute (i.e. neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are in effect), so that the cleared mode is propagated to the server in the ACL / POSIX cases. 2. cifs_setattr_unix(): this function is only called when Unix extensions are in effect, so the mode is always stored on the server. Remove the shortcut entirely so that the cleared mode is always pushed. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89622 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in mcp->rxbuf for the duration of a transfer but never clears it when the transfer finishes or times out. Once the caller frees or reuses the buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to memcpy device data into the freed memory, causing a write use-after-free. Route all return paths through a single exit point that clears mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard in the raw_event handler can reject any report arriving after the transfer has ended. | ||||
| CVE-2026-89620 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: validate report size before copy write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap buffer allocated in quickspi_alloc_report_buf() to the device-descriptor derived max_report_len (a few hundred bytes for a touch controller). It copies the caller-supplied report into that buffer: memcpy(write_buf->content, report_buf, report_buf_len); The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a report larger than max_report_len therefore overflows report_buf with attacker-controlled length and content. Record the report_buf allocation size and reject reports that do not fit before copying, matching the equivalent guard in the intel-quicki2c sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix. write_cmd_to_txdma() writes the output report header ahead of the content in the same buffer, so size the allocation to cover the header as well. That keeps the added bound from rejecting a maximum-sized report. | ||||
| CVE-2026-89619 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer quickspi_hid_raw_request() receives the caller's buffer length in len, but quickspi_get_report() never sees it and copies the whole device-supplied response into buf regardless: memcpy(buf, qsdev->report_buf, qsdev->report_len); qsdev->report_len comes from the input report the touch controller returns, while buf is sized to whatever the caller asked hidraw for through HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf with device-controlled content. The intel-quicki2c sibling already passes the caller length down to quicki2c_get_report() and validates the response against it before the copy. Do the same here. | ||||
| CVE-2026-89602 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: skip sufficiently large global buffers when resizing z_erofs_gbuf_nrpages is advanced only after every global buffer has been grown. If a resize fails after some buffers were enlarged, a retry revisits those enlarged buffers. Retrying the same size then returns -ENOMEM because alloc_pages_bulk() has no pages to add and the unchanged return value is treated as a failure. Retrying an intermediate size allocates a temporary pointer array smaller than gbuf->nrpages and copies more existing pointers than the array can hold. Skip buffers that already satisfy the request. Once all remaining buffers have caught up, advancing z_erofs_gbuf_nrpages again describes the guaranteed minimum size across the pool. | ||||
| CVE-2026-89601 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had a construct like: if (IS_SYNC(inode)) { sync_inode_metadata(inode, 1); } else { mark_inode_dirty(inode); } which leads to lost inode updates for IS_SYNC inodes because sync_inode_metadata() does anything only if the inode is already dirty and hence inode updates may be simply lost. Fix the problem by unconditionally marking the inode dirty and *then* call sync_inode_metadata(). | ||||
| CVE-2026-89600 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: fix use-after-free of file range info fsnotify_pre_content() builds its file_range on the triggering task's stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the heap-allocated permission event so copy_range_info_to_user() can report the offset later. The event reader can set the event state to FAN_EVENT_REPORTED and then sleep while preparing the file descriptor. If a signal interrupts the triggering task at that point, fanotify_get_response() changes the state to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack frame while the reader still owns the event. The reader then dereferences pevent->ppos and copies the stale stack value to userspace. KASAN reported: BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970 Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95 Call Trace: fanotify_read+0x293e/0x2970 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Store the range position directly in the permission event and use FANOTIFY_NO_RANGE when range information is unavailable. The event remains alive until the reader finishes, so the reported offset no longer depends on the triggering task's stack. | ||||
| CVE-2026-89588 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: GHES: fix ARM section length accounting after header In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm header with (err + 1), the remaining length was reduced by sizeof(err) (pointer size) instead of sizeof(*err) (structure size). That overestimates the bytes left for cper_arm_err_info records and can let the parser read past the CPER section when err_info_num is large enough relative to error_data_length. Use sizeof(*err) so the length accounting matches the pointer advance and the earlier sizeof(*err) size check. | ||||
| CVE-2026-89584 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block: validate user space vectors during extraction The bio-based drivers don't necessarily check the alignment split, and stacking block drivers don't always handle a misalignment detected after submitting the bio. Validate user vectors against the device's dma_alignment as the bio is built from the iov_iter, rejecting misaligned early with -EINVAL. | ||||
| CVE-2026-89581 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix per-CPU address resolution into an extended register The destination of the per-CPU address MOV is encoded in ModRM.reg, which is extended by REX.R, but the REX prefix is built with add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and this instruction addresses memory as disp32 with no base, so the bit has no effect at all and the high register bit is simply lost. Every is_ereg() destination therefore resolves to the wrong register, picking whichever one shares the low three bits: R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI With BPF_REG_5, whose reg2hex is 0, the emitted 65 49 03 04 25 <off> add %gs:<off>,%rax adds the per-CPU offset to RAX rather than R8. The destination keeps the unadjusted address and RAX is clobbered, so the program goes on to dereference a pointer that was never made per-CPU: BUG: unable to handle page fault for address: 0000607e386a8894 RIP: bpf_prog_707837aafd2aa9ae_update_percpu_data+0x93/0xc9 Call Trace: __bpf_prog_test_run_raw_tp+0x2dc/0x7d0 __flush_smp_call_function_queue+0x1e9/0xc80 Kernel panic - not syncing: Fatal exception in interrupt R5 is the mildest of the four, aliasing a scratch register and faulting at the store. R7 aliases RBP and would corrupt the frame pointer, R8 and R9 alias the argument registers. Use add_2mod() so the register goes through REX.R, matching how add_2reg() places it in ModRM.reg and how emit_priv_frame_ptr() hardcodes 0x4c for the same instruction with R9. Encodings for the non-extended registers are unchanged. Problem showed up when trying to resurrect BPF_GCC CI (selftests built with BPF_GCC). This has gone unnoticed because clang reloads the address into R1 before each per-CPU access, so the destination is never an extended register. GCC keeps several per-CPU addresses live at once, and test_progs-bpf_gcc panics the kernel in global_percpu_data/init, where the address of a .percpu variable ends up in R5. | ||||
| CVE-2026-89580 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->nr with a larger value. copy_len is then computed from the inflated trace->nr and can exceed the caller's buffer, causing an out-of-bounds write in the memcpy() and in the build_id path. The rcu_read_lock() taken here alone does not prevent this. It is only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does not disable preemption; it merely keeps perf's callchain buffer array alive (freed via call_rcu()) and does nothing to stop another task from reusing the entry. Disable preemption around obtaining the callchain entry and copying it into the caller's buffer, so the entry cannot be reused underneath us and trace->nr stays bounded by max_depth. Build ID resolution may fault and is therefore deferred until after preemption is re-enabled; by then the instruction pointers have already been copied into buf, so it operates only on that private copy. Note, preempt_disable() also subsumes the buffer-lifetime guarantee the rcu_read_lock() provided, since a preempt-disabled section is an RCU read-side critical section for the callchain buffers' call_rcu() reclaim. [ changed Fixes: commit ] | ||||
| CVE-2026-89574 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and csum and nothing else, while node_check(), next to it, has bounded the structural fields since both were written. dm_array_cursor_next() takes its loop bound from the on-disk nr_entries and element_at() is unguarded pointer arithmetic, so a count larger than the block holds keeps the cursor in one block while the index grows past it and the read walks off the dm-bufio buffer -- dm_cache_load_mappings() drives it once per cache block at activation. Check the header against itself: reject a zero value_size, require max_entries to equal calc_max_entries() for that value_size and block size, and require nr_entries to fit. Equality rather than an upper bound, since a count below the real capacity trips BUG_ON() in fill_ablock() and trim_ablock(). Metadata dm-array writes satisfies all three. | ||||
| CVE-2026-89571 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: bound fwctl command payload to the input buffer fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len) and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc() ignores in_len and never checks the user-controlled op_size against it. cxlctl_set_feature() bounds op_size only from below (op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr) bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len and a large op_size the first memcpy() already reads past the kvzalloc(in_len) buffer; the out-of-bounds bytes are placed in the mailbox payload and sent to the device, and a large enough op_size can walk into unmapped memory and oops the kernel. The Get paths pin op_size to a fixed size but likewise read the input struct without checking in_len. Reject, at the single dispatch point, any request whose fixed header plus op_size does not fit in the copied-in buffer. The lower-bound test guards the subtraction and ensures op_size was copied in before it is read. | ||||
| CVE-2026-89570 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/mce: Make the MCE notifier per-region Flavien Solt reported lifetime issues with the CXL MCE notifier, which can lead to NULL dereferences and use-after-free in the MCE handler. The notifier was registered per memory device and stored in 'struct cxl_memdev_state', even though it only needs the region state (the region's SPA range and its extended linear cache size). Instead of keeping the memory device and endpoint alive, the correct fix is to move the notifier into 'struct cxl_region' and register it from cxl_region_probe() as it should be a per-region notifier. Setup the registration to only happen for regions that have an extended linear cache as that is the only current usage. Remove cxl_port_get_spa_cache_alias() as it is now dead code. [ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ] | ||||