Export limit exceeded: 100158 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (100158 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89695 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: cap decoded POSIX ACL count to bound sort cost nfsd4_decode_posixacl() reads a u32 entry count off the wire and passes it straight to posix_acl_alloc() and sort_pacl_range(). The latter is an O(n^2) bubble sort, so a client-chosen count drives unbounded CPU in the server's compound processing path. nfsd4_decode_posixacl() xdr_stream_decode_u32(&count) /* uncapped u32 */ posix_acl_alloc(count, GFP_KERNEL) sort_pacl_range(*acl, 0, count - 1) /* O(n^2) bubble sort */ The encoder side in the same file already rejects ACLs whose a_count exceeds NFS_ACL_MAX_ENTRIES, but the decoder introduced in commit 5fc51dfc2eb1 ("NFSD: Add support for XDR decoding POSIX draft ACLs") omitted the symmetric check. Fix by rejecting a wire count greater than NFS_ACL_MAX_ENTRIES with nfserr_inval, before any allocation, so the sort is bounded by NFS_ACL_MAX_ENTRIES^2 comparisons. While we're in here, also fix the nfserr_resource return if posix_acl_alloc() fails. That's not a legal error code for v4.1+. Change it to return nfserr_jukebox as that's more appropriate for memory allocation failures. | ||||
| CVE-2026-89692 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clear CALLBACK_RUNNING on failed delegation recall queue nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit at entry to serialize recall work, then calls nfsd4_run_cb() to queue the recall. When the queue attempt fails the refcount bump is undone, but the RUNNING bit is left set. The only site that clears the bit is nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the workqueue and is therefore unreachable when nothing was queued. The bit becomes a permanent latch on dp->dl_recall.cb_flags: every subsequent break_lease() on the same delegation hits the early-return guard in nfsd_break_one_deleg() and silently skips the recall, so the delegation is never broken and the conflicting open or lock stalls. Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside the refcount_dec. | ||||
| CVE-2026-89691 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clear opcnt on compound arg release to prevent OOB read nfsd4_release_compoundargs() resets args->ops to the inline iops[8] array when the dynamically-allocated ops buffer is freed, but leaves args->opcnt at its original value (which can be up to 200 for NFSv4.1+ compounds). If rq_status_counter is stuck at an odd value (which can happen when nfsd_dispatch() hits an error path after setting it odd), the RPC status dumpit handler reads min(opcnt, 16) entries from args->ops[]. Since iops only has 8 elements and is the last field in struct nfsd4_compoundargs, reading indices 8-15 accesses adjacent slab memory and leaks it to userspace via netlink. Zero opcnt unconditionally in nfsd4_release_compoundargs() so stale compound metadata is never exposed through the status interface. [ cel: Remove the kvfree_rcu_mightsleep() sleep from the exposure window ] | ||||
| CVE-2026-89690 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: defer vfree of compound ops to fix rpc_status UAF The rpc_status netlink dumpit walks every in-flight svc_rqst under rcu_read_lock and, for NFSv4 requests, reads opnums out of args->ops[]. But args->ops is a separate vmalloc buffer freed synchronously by vfree() in nfsd4_release_compoundargs() at the end of every compound. The dumpit's rcu_read_lock pins the svc_rqst struct itself (freed via kfree_rcu), but nothing defers the vfree of the ops buffer across the RCU grace period. A concurrent compound completion can therefore free the buffer while the dumpit is reading it — a use-after-free on vmalloc memory. The trailing seqcount recheck (smp_load_acquire of rq_status_counter) cannot undo a load that already retired against freed memory. Fix by replacing vfree(args->ops) with kvfree_rcu_mightsleep(), which defers the free until after an RCU grace period. This makes the existing rcu_read_lock in the dumpit sufficient to protect the read. The tradeoff is that completed compound ops buffers (up to 200 * sizeof(struct nfsd4_op)) persist in memory slightly longer, across one grace period, before being reclaimed. | ||||
| CVE-2026-89687 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: ensure nfsd_file_do_acquire() does not use a non-opened file ->atomic_open is permitted to return success without actually opening the file. It indicates this by calling finish_no_open(). This means dentry_create() can return a file which hasn't been opened. This is extremely unlikely as ->atomic_open handlers typically use finish_no_open() only for already existing files, and dentry_create() isn't called in that case, and the parent being locked should prevent races. However out of an abundance of caution it seems wise to teach nfsd to only use the file returned by dentry_create() if FMODE_OPENED is set, indicating that it has in fact been opened. | ||||
| CVE-2026-89685 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix clock domain mismatch in clients_still_reclaiming() clients_still_reclaiming() computes a deadline from nn->boot_time (CLOCK_REALTIME, ~1.7 billion) but compares it against ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot). The comparison is always false — it would take ~54 years of uptime for BOOTTIME to exceed the REALTIME-derived deadline. This means any client can hold the server in grace indefinitely by sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim operations for all other clients. Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time and use it for the deadline computation. boot_time (CLOCK_REALTIME) is preserved for its cl_boot clientid-nonce role. | ||||
| CVE-2026-89682 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix fcache_disposal UAF by inlining dispose state into nfsd_net nfsd_file_dispose_list_delayed() defers fput() to nfsd service threads via a per-net freeme queue, preventing the shrinker and GC worker from bearing the cost of closing files (see ffb402596147). However, the queue lives in a separately-allocated struct nfsd_fcache_disposal that is freed by nfsd_free_fcache_disposal_net() during per-net teardown. The global shrinker, laundrette, and fsnotify callbacks can still be inside nfsd_file_dispose_list_delayed() dereferencing that pointer, causing a use-after-free. Inline the spinlock and freeme list directly into struct nfsd_net (as fcache_dispose_lock and fcache_dispose_list), eliminating the separately allocated struct nfsd_fcache_disposal entirely. These fields now have the same lifetime as the net namespace itself, so there is no dangling pointer to chase. nfsd_file_cache_start_net() now just initializes the inline fields and cannot fail due to allocation. nfsd_file_cache_shutdown_net() drains the inline list directly instead of freeing a separate struct. The alloc/free helpers are removed. | ||||
| CVE-2026-89680 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns nfserr_offload_denied directly, bypassing the out: label where release_copy_files() would drop the nf_dst reference taken by nfs4_preprocess_stateid_op(). Each failed inter-server COPY leaks one nfsd_file, pinning file/inode/dentry/vfsmount. Fix by setting status and jumping to out: instead of returning directly. | ||||
| CVE-2026-89679 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix null dereference in nfsd4_setattr for deleg timestamp attrs When a SETATTR request includes FATTR4_WORD2_TIME_DELEG_ACCESS or FATTR4_WORD2_TIME_DELEG_MODIFY in the attribute bitmap, nfsd4_setattr() sets deleg_attrs=true and calls nfs4_preprocess_stateid_op() to validate the stateid. If the client supplies the NFSv4 "one stateid" (all-0xFF bytes), check_special_stateids() returns nfs_ok without populating the output nfs4_stid pointer, because the special-stateid path in nfs4_preprocess_stateid_op() jumps to done: with s==NULL, and the "if (s)" block that would set *cstid is skipped. The local variable `st` remains NULL. Back in nfsd4_setattr(), the if (deleg_attrs) block then unconditionally dereferences st->sc_type (at offset 4 from NULL), causing a kernel oops. This is remotely triggerable by any NFSv4 client: send COMPOUND [PUTROOTFH, SETATTR(ONE_STATEID, {bmval2=FATTR4_WORD2_TIME_DELEG_ACCESS, ...})]. No authentication, delegation, or prior state is required. Fix by adding a NULL check before the dereference. A special stateid is not a delegation stateid, so the existing nfserr_bad_stateid return value is already correct; we only need to guard the pointer dereference itself. | ||||
| CVE-2026-89678 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix partial-write detection in nfsd_direct_write nfsd_direct_write() walks a list of write segments and, after each vfs_iocb_iter_write(), tries to detect a short write so the loop can stop before placing the next segment at a wrong file offset: host_err = vfs_iocb_iter_write(file, kiocb, &segments[i].iter); if (host_err < 0) return host_err; *cnt += host_err; if (host_err < segments[i].iter.count) break; /* partial write */ vfs_iocb_iter_write() runs the iter through ->write_iter(), which advances the iter by the number of bytes written. By the time the check runs, segments[i].iter.count is the residual, not the original request length: before write_iter: iter.count == original_len after write_iter: iter.count == original_len - host_err The condition then reduces to host_err < original_len - host_err, so the break fires only when less than half of the segment was written. Any short write completing between 50% and 99% of the segment slips through; the loop advances to the next segment with kiocb->ki_pos only bumped by the short amount, writing the next segment's payload at the wrong offset and over-reporting *cnt to the NFS client. Snapshot the segment's byte count before the write and compare host_err against that snapshot so any short write breaks the loop. | ||||
| CVE-2026-89670 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: hold rcu across localio cmpxchg retry nfsd_file objects are freed via call_rcu (filecache.c:296), and nfsd_file_slab is created without SLAB_TYPESAFE_BY_RCU (KMEM_CACHE(nfsd_file, 0) at filecache.c:789), so the slab page backing a freed nfsd_file becomes freely reclaimable once the RCU grace period elapses. The again: retry block in nfsd_open_local_fh() loads a pointer with cmpxchg and then calls nfsd_file_get(new) (which is refcount_inc_not_zero) without holding rcu_read_lock. The sole caller nfs_open_local_fh() drops rcu_read_lock before invoking this helper, so no outer reader-side critical section covers the load. CPU 0 (nfsd_open_local_fh) CPU 1 (nfsd_file_put_local) ----- ----- new = cmpxchg(pnf, NULL, ...) nf = xchg(pnf, NULL) nfsd_file_put(nf) last ref -> call_rcu() /* grace period elapses; slab page recycled */ nfsd_file_get(new) refcount_inc_not_zero(&new->nf_ref) /* operates on recycled memory */ A non-zero word at the nf_ref offset of the recycled object makes the refcount bump appear to succeed, and the caller then dereferences new->nf_net and new->nf_file out of freed memory. Fix by taking rcu_read_lock() immediately before the cmpxchg and releasing it on all three exits of the if (new) block: the goto-again retry, the lost-race cleanup path, and the install-succeeded path. nfsd_file_put() and nfsd_net_put() stay outside the RCU section so they remain free to block. | ||||
| CVE-2026-89668 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move nfsd_debugfs_init() after nfsd4_init_slabs() in init_nfsd() nfsd_debugfs_init() runs before nfsd4_init_slabs() in init_nfsd(). If the slab allocation fails, the bare "return retval" bypasses nfsd_debugfs_exit(), leaving orphan debugfs files with stale fops pointers into the freed module text. Move nfsd_debugfs_init() to after the slab init succeeds, so the early return has no debugfs state to clean up. Since debugfs is now the more recently initialized of the two, also update the unwind paths to match reverse-initialization (LIFO) order: run nfsd_debugfs_exit() before nfsd4_free_slabs() in both the init_nfsd() error path and exit_nfsd(). The nfsd debugfs files only reference module-global state and have no dependency on the slab caches, so that reordering is a cleanup with no functional change. | ||||
| CVE-2026-89667 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: close shrinker/GC/fsnotify vs per-net shutdown race in filecache The shrinker, GC worker, and fsnotify/lease callbacks can unhash an nfsd_file from the rhashtable and then call nfsd_file_dispose_list_delayed() to move it to the per-net dispose list. If nfsd_file_cache_shutdown_net() runs concurrently, its rhashtable walk misses the already-unhashed file, and its drain of the per-net dispose list can run before the file has been queued. The file then sits on the per-net list with no thread to drain it, leaking both the file and its associated state. The GC worker and shrinker already hold nfsd_gc_lock while walking the LRU, but in the original code they release it before calling nfsd_file_dispose_list_delayed(). The fsnotify/lease path (nfsd_file_close_inode) has no synchronization at all. Fix this by: 1. Widening nfsd_gc_lock in both nfsd_file_gc() and nfsd_file_lru_scan() to cover the nfsd_file_dispose_list_delayed() call. 2. Wrapping nfsd_file_close_inode() in nfsd_gc_lock so that all three callers of nfsd_file_dispose_list_delayed() hold the lock. 3. Adding a spin_lock/unlock(nfsd_gc_lock) barrier in nfsd_file_cache_shutdown_net() after the purge, so that any in-progress disposal has fully completed before the per-net list is drained. All operations inside the lock are non-sleeping (rhashtable lookups, atomic bit/refcount ops, list moves, svc_wake_up), so the spinlock is appropriate. | ||||
| CVE-2026-89664 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release OPEN-decoded posix ACLs via op_release nfsd4_decode_createhow4() calls nfsd4_decode_fattr4(), which allocates refcounted struct posix_acl objects via posix_acl_alloc() and stores them in open->op_pacl and open->op_dpacl. These pointers must be released once the OPEN compound finishes. When nfsd4_decode_open_claim4() returns a non-seqid-mutating error, the dispatcher short-circuits before op_func runs: nfsd4_proc_compound() if (op->status && op->opnum == OP_OPEN) op->status = nfsd4_open_omfg(...) if (!seqid_mutating_err(ntohl(op->status))) return op->status; /* nfsd4_open() never runs */ ... opdesc->op_release(&op->u) /* must still release op_pacl/op_dpacl */ Before this change OP_OPEN had no .op_release in nfsd4_ops[], and the release pair lived inside nfsd4_open() at its out_err: label. On the short-circuit path nfsd4_open() is never invoked, so both posix_acl refs leak on every malformed OPEN compound that carries valid POSIX ACL createhow4 attributes. Add nfsd4_open_release() and wire it as .op_release for OP_OPEN. posix_acl_release() is NULL-safe, so the single release site covers both the normal path and the nfsd4_open_omfg short-circuit. Remove the matching posix_acl_release() pair from nfsd4_open()'s out_err: label to avoid double-releasing. The compound loop has two encoding branches: nfsd4_encode_operation() for normal ops, and nfsd4_encode_replay() for v4.0 replayed ops. op_release was only called from nfsd4_encode_operation(), so resources attached to op->u leak on the replay path. Move the op_release() call out of nfsd4_encode_operation() and the replay branch, placing it after the if-else in nfsd4_proc_compound(). This gives a single call site in a fairly obviously-correct place, covering both the normal encoding and replay paths. | ||||
| CVE-2026-89648 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: cap delegated inode count in ceph_parse_deleg_inos() ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers from an MDS create-with-delegation reply. For each set it reads a 64-bit start and a 64-bit len with ceph_decode_64_safe(), which only validates that the eight bytes are present in the message, not the value, and then loops over len while inserting entries into s_delegated_inos. len is fully attacker controlled. A malicious or compromised MDS can send one huge interval, many intervals in one reply, duplicate intervals, or repeated replies that accumulate delegated inodes on the same session. The original code bounded none of these and could spin the insert loop or grow the xarray without limit. Bound both dimensions with a single enforcement point. Track the number of delegated inodes held by each MDS session in an atomic counter and grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless() to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper is the only place the counter grows, the per-session population can never exceed the cap, so no separate per-session pre-check is needed. The counter is decremented when async create consumes a delegated inode or when an insert fails, incremented when a delegated inode is restored, initialized with the session xarray, and reset when reconnect destroys the xarray. A per-session cap alone still lets one reply spin the insert loop on duplicate ranges without growing the counter, so also cap the aggregate interval length accepted from a single reply. Together these bound both the loop trip count per reply and the xarray population across replies. The cap is a fixed, client-chosen constant rather than a value derived from the MDS. mds_client_prealloc_inos is a userspace MDS configuration option; it is never sent to the kernel client on the wire, and a server-supplied bound could not be trusted for a defensive limit in any case. The constant is set well above that option's documented default of 1000 (a generous multiple), so legitimate refill behavior is unaffected while the CPU and xarray memory a malformed delegation stream can consume stays bounded. Impact: a malicious or compromised Ceph MDS can no longer make a client spin through an unbounded delegated-inode interval or grow one session's delegated-inode xarray without limit. | ||||
| CVE-2026-89647 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: do not repeat ceph_trim_dentries() if no progress possible ceph_cap_reclaim_work() re-queues itself for as long as ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease walk exhausts its `nr_to_scan` budget. This creates a busy loop that consumes CPU without making any progress when there is nothing to reclaim: with no cap pressure (`count==0`) and every scanned lease still valid, each pass runs the full scan budget down to zero and returns `-EAGAIN`, only to be queued again immediately. The dir-lease walk made this worse. When `expire_dir_lease` is `false` (i.e. we have no intention of reclaiming dir leases), __dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH` moves the dentry to the tail of the list and resets `di->time` via __dentry_dir_lease_touch(), so a walk over N valid leases pointlessly rewrote the list, refreshed the timestamps (preventing them from ever aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN` requeue. Fix this in three steps: - Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is `false`. If we are not going to reclaim the lease, leave it in place instead of churning the list and resetting its timestamp; the walk then terminates naturally (or via `STOP` at the first fresh lease). - Only return `-EAGAIN` from the first (dentry-lease) walk when something was actually freed. A full batch that frees nothing means retrying the same list immediately is futile; fall through to the dir-lease walk instead. - After both walks, bail out with success (0) when nothing was freed and there is no cap pressure (`count==0`). There is no reason to keep retrying when we are not over the cap limit and made no progress. Under real cap pressure (`count>0`) the reclaim path is unchanged and still retries via `-EAGAIN`. Without this patch, I saw 500 ceph_trim_dentries() calls per second on our web servers. This is very visible in `/proc/lock_stat` (5 minute capture): class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00 ----------------------- &mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 &mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 ----------------------- &mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8 &mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0 &mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8 With this patch: class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg &mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27 ----------------------- &mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8 &mdsc->dentry_list_lock 1 ---truncated--- | ||||
| CVE-2026-89646 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix leaked inode reference on writeback abort at umount ceph_dirty_folio() takes a wrbuffer claim on each newly dirtied folio: it bumps i_wrbuffer_ref (taking an ihold() on the 0->1 transition) and attaches the snap_context to folio->private. That claim is released only by ceph_put_wrbuffer_cap_refs(), which for a submitted write runs from writepages_finish(). In ceph_submit_write(), if ceph_inc_osd_stopping_blocker() fails -- which happens during umount -- the request is aborted before submission: the already-collected folios are only redirtied and unlocked, so writepages_finish() never runs and the claim is leaked. redirty_page_for_writepage() -> folio_redirty_for_writepage() -> filemap_dirty_folio() sets PG_dirty directly and does not go through ->dirty_folio, so ceph_dirty_folio() is not re-entered to rebalance it. Because every subsequent writeback also fails the osd_stopping_blocker, i_wrbuffer_ref never returns to 0, the ihold() is never dropped, and the inode cannot be evicted: VFS: Busy inodes after unmount of ceph kernel BUG at fs/super.c:650! Release the orphaned claim in the abort path before redirtying, via ceph_undo_wrbuffer_claim(): detach the snap_context, drop the wrbuffer reference (letting i_wrbuffer_ref reach 0 and iput() the inode), and drop the snap_context reference -- i.e. do what writepages_finish() would have done for these never-submitted folios. Only the locked_pages entries are undone; folios still in the fbatch were never dirty-cleared by this call (folio_clear_dirty_for_io() is the ownership-transfer point, and a successful move NULLs the fbatch slot), so they hold no claim this call owns. | ||||
| CVE-2026-89641 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size() When the else branch of cifs_file_set_size() finds a writable file handle via find_writable_file(), it borrows tcon and server from the handle's tlink, attempts the handle-based set_file_size() RPC, and then releases the handle with cifsFileInfo_put(). If set_file_size() fails, execution falls through to the path-based fallback, which reuses the borrowed tcon and server under the "if (tcon == NULL)" guard. Since tcon is not NULL at that point, the guard is skipped. If cifsFileInfo_put() dropped the last reference on a tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE cleared, as happens during reconnection or session teardown), cifs_put_tlink() will have freed tcon; the subsequent set_path_size() call is then a use-after-free. Setting tcon = NULL after cifsFileInfo_put() causes the existing guard to take the cifs_sb_tlink() path, which acquires a fresh reference for the path-based operation or fails cleanly if the session is gone. | ||||
| CVE-2026-89639 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: use cifs_invalidate_cache() in cifs_do_truncate() for O_TRUNC cifs_do_truncate() is invoked from cifs_open() without i_rwsem, so it cannot use cifs_resize_file_locked() to perform a proper fscache cookie resize. Instead, add cifs_invalidate_cache() after cifs_setsize(). cifs_invalidate_cache() calls fscache_invalidate(), which works without holding i_rwsem: it unconditionally increments inval_counter and sets FSCACHE_COOKIE_NO_DATA_TO_READ, ensuring that stale cached data is not served once the cookie is later activated by fscache_use_cookie(). Truncation to zero leaves no valid cached data, making invalidation the correct semantic here. | ||||
| CVE-2026-89638 | 1 Linux | 1 Linux Kernel | 2026-09-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit survives the write. This is a security issue: on local filesystems the setuid bit is stripped when a file is written, but over these cifs.ko mounts the bit persists on the server, potentially allowing an unexpected privilege escalation on subsequent execution. Fix this in two places: 1. cifs_setattr_nounix(): only take the "skip mode change" shortcut when the mode is emulated via the DOS read-only attribute (i.e. neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are in effect), so that the cleared mode is propagated to the server in the ACL / POSIX cases. 2. cifs_setattr_unix(): this function is only called when Unix extensions are in effect, so the mode is always stored on the server. Remove the shortcut entirely so that the cleared mode is always pushed. | ||||