Export limit exceeded: 386950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 386950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 386950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 386950 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (386950 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80800 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound the connect_sn TLV walk to the skb Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(), and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same pattern remains unbounded: nfc_llcp_connect_sn(). nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header (type, length) followed by length bytes of value, without checking that the two header bytes or the declared length stay within the buffer. It returns a pointer to a service name of up to 255 bytes that may point past the end of the skb; it is subsequently consumed by memcmp() in nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as "skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter than the LLCP header underflows to a huge length and the walk runs far past the buffer. nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and nfc_llcp_recv_cc(), i.e. from received CONNECT and CC PDUs. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP, and the nfc_llcp_rx_skb() dispatcher applies no minimum-length guard. Walk the TLV list by pointer, bounded by skb_tail_pointer(skb), and validate each declared length before use, matching the approach already used for nfc_llcp_recv_snl(). Starting the walk at &skb->data[LLCP_HEADER_SIZE] against the tail pointer also removes the size_t underflow for short frames. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80802 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: bound the device-reported read length and fix an skb leak fdp_nci_i2c_read() takes the next packet length from two device-supplied bytes and never validates it. The value is a u16 used as the i2c_master_recv() count into a 261-byte on-stack buffer: a malicious, counterfeit or malfunctioning controller (or an i2c bus interposer) can drive it far past the buffer for a stack out-of-bounds write that clobbers the canary and return address, or below the minimum frame size (directly, or by truncating the computed sum) so the header/LRC strip and the next length read run past a short receive. Reject a length outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a corrupted packet already is, and force resynchronization. The same loop allocates one data skb per iteration and assumes a length packet followed by a data packet; a device that sends two data packets in one call leaks the first skb when the second allocation overwrites it. Free a previously allocated skb before allocating the next. | ||||
| CVE-2026-80809 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix missing metadata reservation for large xattrs [BUG] lsetxattr() panics the kernel when setting a large xattr value on a fragmented filesystem where the file already has an external xattr block. [CAUSE] ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new xattr value's extent tree when the file already has an external xattr block. The not_found path leaves meta_add at zero, so meta_ac is NULL when ocfs2_xattr_extend_allocation() runs. A new value root has room for a single extent record. On a fragmented filesystem, the allocator cannot satisfy the xattr value in one contiguous run, so each non-contiguous run requires its own extent record. When the value root's extent list is full and meta_ac is NULL, ocfs2_add_clusters_in_btree() returns RESTART_META, and ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META). [FIX] The case where no xattr block exists yet already calls ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree metadata. Add the same reservation to the case where an xattr block already exists, making the two cases consistent. Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is returned despite the reservation, the error propagates to userspace instead of panicking the kernel. | ||||
| CVE-2026-80845 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: avoid lock inversion in nat keepalive work nat_keepalive_work() walks the state table while xfrm_state_walk() holds net->xfrm.xfrm_state_lock. Its callback then acquires x->lock, which conflicts with the delete path taking the same locks in reverse order via xfrm_state_delete() and __xfrm_state_delete(). This creates an AB-BA deadlock that is reported by lockdep when a NAT keepalive worker races with SA deletion. Fix this by splitting the keepalive walk into two phases. First, collect the candidate states while the walk holds xfrm_state_lock and take a reference on each state. Then, after the walk completes, process each collected state and acquire x->lock without nesting it under xfrm_state_lock. | ||||
| CVE-2026-80876 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix event length with forced 8-byte alignment When RB_FORCE_8BYTE_ALIGNMENT is true, rb_calculate_event_length() reserves the space of event->array[0] for placing the data length and rb_update_event() stores the data length in event->array[0] accordingly. As a result the whole event length will add extra 4 bytes for sizeof(event.array[0]) unconditionally. But ring_buffer_event_length() only subtracts the sizeof(event->array[0]) for events larger than RB_MAX_SMALL_DATA + sizeof(event->array[0]). As a result, small events on architectures with RB_FORCE_8BYTE_ALIGNMENT=true report a data length that is 4 bytes larger than expected. To fix it, add the RB_FORCE_8BYTE_ALIGNMENT as a condition to subtract the size of that length field whenever RB_FORCE_8BYTE_ALIGNMENT is true. This issue is observed in a riscv64 kernel with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, when we run ftrace selftest trace_marker_raw.tc, we get the weird log: for cases where the id is 1..100, the number of data field is 8*N, but once id exceeds 100, the number of data field becomes 8*N+4: # 1 buf: 58 00 00 00 80 5e d1 63 (number of data field is 8*1) ... # a buf: 58 ... (number of data field is 8*2) ... # 64 buf: 58 ... (number of data field is 8*13) # 65 buf: 58 ... (number of data field is 8*13+4) After applying this change, the number of data field keeps being 8*N+4 consistently. | ||||
| CVE-2026-78327 | 2026-09-04 | 9.1 Critical | ||
| An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the SonicWall Network Security Manager (NSM) On-Prem Management interface allows an authenticated attacker with SuperAdmin privileges to inject arbitrary commands that are executed on the underlying host, resulting in remote code execution. | ||||
| CVE-2026-19534 | 1 Undici | 1 Undici | 2026-09-04 | 7.5 High |
| undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2. | ||||
| CVE-2026-71620 | 2026-09-04 | N/A | ||
| File Upload vulnerability in Zhao-github ApiAdmin v.5.0.1 allows a remote attacker to execute arbitrary code via a crafted .php file | ||||
| CVE-2026-80758 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Avoid private hash use-after-free on final put futex_private_hash_put() drops the reference to fph before evaluating fph->mm for wake_up_var(). futex_ref_put() enables preemption again before returning. If that put drops the final reference and the task is preempted, another task can pivot to the replacement hash and free the old hash after an RCU grace period. The first task then reads fph->mm from the freed allocation when it resumes. KASAN reports a slab-use-after-free in futex_private_hash_put(), with the read at offset 24 in a freed kmalloc-512 allocation. The allocation and free stacks point to futex_hash_allocate() and the RCU free path, respectively. Load the mm pointer while the fph reference is still held and pass the saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue key and does not dereference the mm through it. | ||||
| CVE-2026-80765 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: validate initial device info bounds The Hyper-V synthetic HID host supplies SYNTH_HID_INITIAL_DEVICE_INFO messages that contain a HID descriptor followed by the report descriptor bytes. mousevsc_on_receive_device_info() trusts bLength and wDescriptorLength without checking that the received packet contains both byte ranges. A malformed host or backend message can therefore make the guest read past the received VMBus packet while copying the report descriptor. Pass the received initial-device-info size into the parser and reject descriptor lengths that exceed the packet. Impact: A malicious Hyper-V host or backend can crash a guest by sending a short initial device-info message with an oversized HID report descriptor length. | ||||
| CVE-2026-80768 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: ft260: fix stack-use-after-return write in I2C read race ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read times out, ft260_i2c_read() resets the controller, clears read_buf and returns, unwinding the stack frame the buffer lived in. A response that arrives at that moment lets ft260_raw_event() pass the NULL check and then memcpy() the device-controlled payload into the now-freed stack location, a bounded but attacker-influenced stack-use-after-return write triggerable by malicious or malfunctioning hardware. Add a dedicated spinlock that serializes every access to read_buf, read_idx and read_len. ft260_raw_event() now holds it across the NULL check, the memcpy and the index update, while the read path takes it when arming and when clearing the buffer, so the teardown can no longer slip between the check and the copy. | ||||
| CVE-2026-80770 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths at it. | ||||
| CVE-2026-80772 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix out-of-bounds read in joycon_ctlr_read_handler() joycon_ctlr_read_handler() casts an incoming HID input report to struct joycon_input_report and parses it, guarding the cast only with a 12-byte length check: if (size >= 12) /* make sure it contains the input report */ joycon_parse_report(ctlr, (struct joycon_input_report *)data); struct joycon_input_report is 49 bytes: a 13-byte header followed by a union whose IMU arm is 36 bytes. For an IMU report joycon_parse_report() -> joycon_parse_imu_report() walks that union (struct offsets 13..48), so a report of exactly 12 bytes with data[0] == JC_INPUT_IMU_DATA passes the guard yet is read up to 37 bytes past its declared length. The over-read bytes are decoded into accelerometer/gyroscope values and forwarded to userspace through the "(IMU)" input device, leaking driver-internal memory. data[0] and size are fully controlled by a malicious or spoofed Joy-Con/Pro Controller. Receive buffers are sized to the maximum report length, so this is an over-read within the allocation rather than a slab OOB, but the decoded bytes still reach userspace. The sibling subcmd path in joycon_ctlr_handle_event() already bounds the same cast correctly: if (size < sizeof(struct joycon_input_report) || data[0] != JC_INPUT_SUBCMD_REPLY) break; Use the same sizeof(struct joycon_input_report) bound here. | ||||
| CVE-2026-80789 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the command. NVMe/TCP has no mandatory authentication in the default configuration, so any peer able to reach the target portal and complete a Fabrics connect can drive this with a single crafted command, repeatable across queues and connections for amplification. This is unbounded kernel memory allocation triggered by a remote, effectively unauthenticated peer. Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file already uses to bound per-PDU H2C data, for every SGL descriptor type, before doing any allocation. This closes the gap for the non-inline descriptor while leaving the existing, tighter inline_data_size check in place for the in-capsule case. Runtime-verified on a v6.19 KASAN stand: with this bound in place, a crafted write command carrying an oversized non-inline SGL length is rejected before sgl_alloc() runs, where the same request previously drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that stayed resident pending an R2T the host never satisfies. | ||||
| CVE-2026-80794 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix uninit-value in the RF discover/activated NTF handlers nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each parse a notification into an on-stack struct (nci_rf_discover_ntf / nci_rf_intf_activated_ntf) that is not initialised. The RF technology-specific parameters are only extracted when rf_tech_specific_params_len is non-zero, so a notification that reports a zero length leaves the rf_tech_specific_params union uninitialised - and both handlers then pass it to nci_add_new_protocol(), which reads it: - discover: nci_add_new_target() -> nci_add_new_protocol(); - activated: nci_target_auto_activated() -> nci_add_new_protocol(). nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch condition and a memcpy() length and copies nfcid1/sens_res/sel_res into ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET. BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0 nci_add_new_protocol+0x624/0x6c0 nci_ntf_packet+0x25b2/0x3c30 nci_rx_work+0x318/0x5d0 process_scheduled_works+0x84b/0x17a0 worker_thread+0xc10/0x11b0 kthread+0x376/0x500 Local variable ntf.i created at: nci_ntf_packet+0xbc2/0x3c30 Zero-initialise both on-stack notifications so the union reads back as zero when no technology-specific parameters are present. | ||||
| CVE-2026-80798 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: reject PDUs shorter than the LLCP header Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes before parsing it. nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/ nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a CONNECT or CC PDU then computes tlv_array_len = skb->len - LLCP_HEADER_SIZE; as a size_t and hands it to the TLV walk. When the frame is shorter than the header the subtraction wraps to a huge value and the walk runs far past the buffer, an out-of-bounds read. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Guard the common receive choke point __nfc_llcp_recv(), shared by both the target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so a short skb is dropped before the rx_work worker parses it. Use pskb_may_pull() rather than a skb->len test so the two header bytes are guaranteed to sit in the skb linear area even for a non-linear skb, matching how the sibling NCI and HCI receive paths validate their headers. Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on linux-next. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80808 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a cache entry selected for reuse has a saturated reference count after taking the buffer lock. The retry returns to the mbcache lookup without making that entry ineligible, so it can select the same unusable entry indefinitely. A task spinning there can hold the parent directory's i_rwsem and leave concurrent rmdir callers blocked. Normally a reusable entry has a reference count below EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are updated under the same buffer lock. A corrupted filesystem can violate that invariant. The syzbot reproducer reports allocator and xattr corruption before triggering this retry loop. Check the untrusted on-disk count before incrementing it, avoiding overflow, and clear MBE_REUSABLE_B when it is already saturated. The next lookup then skips the entry that was just proven unusable. This mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release path marks the entry reusable again on the exact 1024-to-1023 transition. Using the same QEMU harness and guest parameters, current unpatched Linux hung in 6 of 8 420-second trials with the do_rmdir signature; representative NMI backtraces caught the owner spinning in ext4_xattr_block_set(). The patched kernel completed 28 of 28 trials without a hung-task report; the final twelve trials exercised the reviewed overflow-safe form of the change. syzbot's patch testing also completed without reproducing the hang. | ||||
| CVE-2026-80873 | 1 Linux | 1 Linux Kernel | 2026-09-04 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Write ESR_EL2 for injected nested SError exceptions kvm_inject_el2_exception() writes ESR_EL2 for synchronous exceptions but not for SError. enter_exception64() does not write ESR_ELx for any exception type, so the constructed syndrome is dropped. A guest L2 hypervisor taking a nested SError observes stale ESR_EL2. This affects both kvm_inject_nested_serror() and the EASE path in kvm_inject_nested_sea(). Write ESR_EL2 for except_type_serror, matching except_type_sync. | ||||
| CVE-2026-57159 | 1 Pjsip | 1 Pjproject | 2026-09-04 | N/A |
| PJSIP is a free and open source multimedia communication library written in C. Prior to commit 673b978, a remote out-of-bounds read and write can occur in the SDP negotiator when the remote payload-type map maintenance feature is enabled. assign_pt_and_update_map() in pjmedia/src/pjmedia/sdp_neg.c uses payload-type numbers taken from a remote SDP offer or answer to index fixed-size internal tables without sufficient bounds validation, so a crafted remote SDP can cause memory access outside those tables. The practical impact is memory corruption and denial of service; code execution is not demonstrated. This path is only reached when PJMEDIA_SDP_NEG_MAINTAIN_REMOTE_PT_MAP is enabled. The default is disabled, so default builds are not affected; the feature is an interoperability option that integrating products may enable. This issue has been patched via commit 673b978. | ||||
| CVE-2026-57160 | 1 Pjsip | 1 Pjproject | 2026-09-04 | N/A |
| PJSIP is a free and open source multimedia communication library written in C. Prior to commit d6a0e7f, a buffer overflow can occur in pjsip_generic_array_hdr_print() in pjsip/src/pjsip/sip_msg.c, the function that serializes generic array headers (such as Allow, Require, Supported, and Unsupported). Under certain output-buffer boundary conditions the function can write one byte past the end of the buffer. This is reachable mainly in applications that parse and re-serialize incoming SIP requests — for example a proxy, SBC, or B2BUA — where a remote peer can influence the serialized message. The out-of-bounds write is a single fixed byte; code execution and information disclosure are not demonstrated, and in typical pool-based allocations the byte falls within allocation slack. This issue has been patched via commit d6a0e7f. | ||||