Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409964 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409964 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98815 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix cdev lifetime Sashiko bot reported a potential problem for the cdev lifetime in [0] - the code there is heavily based on the NVMe code. Currently the NS head .open and .release file_operations methods take and put a reference to the nvme_ns_head to ensure that this structure does not disappear while we open fds for that cdev. In multipath mode, when we teardown the NS head, we call nvme_cdev_del() -> cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs already open will remain and their fops will still be callable. As such, we can still reference the cdev after the nvme_ns_head reference count drops to 0 (and is freed). This can be shown with an application which delays between opening the cdev and issuing the ioctl while the NS head is being torn down: # ./ioctl_file /dev/ng1n1 & # waiting 10 seconds .... # ./ini_nvme_teardown.sh [ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target" [ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target" # now going to issue ioctl .... [ 26.549285] ================================================================== [ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40 [ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237 [ 26.553805] [ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy) [ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 26.554241] Call Trace: [ 26.554245] <TASK> [ 26.554248] dump_stack_lvl+0x68/0xa0 [ 26.554266] print_report+0x10d/0x5d0 [ 26.554276] ? __virt_addr_valid+0x21d/0x3f0 [ 26.554287] ? cdev_put.part.0+0x3d/0x40 [ 26.554292] kasan_report+0x96/0xd0 [ 26.554300] ? cdev_put.part.0+0x3d/0x40 [ 26.554307] cdev_put.part.0+0x3d/0x40 [ 26.554313] __fput+0x7bc/0xa70 [ 26.554322] fput_close_sync+0xd8/0x190 [ 26.554328] ? __pfx_fput_close_sync+0x10/0x10 [ 26.554337] __x64_sys_close+0x79/0xd0 [ 26.554344] do_syscall_64+0x117/0x6b0 [ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 26.554358] RIP: 0033:0x7f938c067727 [ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf [ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727 [ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 [ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000 [ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78 [ 26.554397] </TASK> [ 26.554399] [ 26.575612] Allocated by task 100: [ 26.575871] kasan_save_stack+0x24/0x50 [ 26.576157] kasan_save_track+0x14/0x30 [ 26.576418] __kasan_kmalloc+0x7f/0x90 [ 26.576668] __kmalloc_noprof+0x281/0x6c0 [ 26.576938] nvme_alloc_ns+0x7f7/0x3170 [ 26.577206] nvme_scan_ns+0x508/0x880 [ 26.577449] async_run_entry_fn+0x8c/0x350 [ 26.577723] process_scheduled_works+0xb6f/0x1a00 [ 26.578034] worker_thread+0x4ad/0xb40 [ 26.578283] kthread+0x34f/0x450 [ 26.578501] ret_from_fork+0x563/0x800 [ 26.578752] ret_from_fork_asm+0x1a/0x30 [ 26.579012] [ 26.579124] Freed by task 237: [ 26.579335] kasan_save_stack+0x24/0x50 [ 26.579596] kasan_save_track+0x14/0x30 [ 26.579855] kasan_save_free_info+0x3a/0x60 [ 26.580131] __kasan_slab_free+0x43/0x70 [ 26.580388] kfree+0x321/0x500 [ 26.580591] nvme_ns_head_chr_release+0x39/0x50 [ 26.580883] __fput+0x352/0xa70 [ 26.581095] fput_close_sync+0xd8/0x190 [ 26.581350] __x64_sys_close+0x79/0xd0 [ 26.581595] do_syscall_64+0x117/0x6b0 [ 26.581842] entry_SYSCAL ---truncated--- | ||||
| CVE-2026-98814 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix command effects log lifetime for multipath heads KASAN reported a use-after-free when an I/O passthrough command was sent through a multipath namespace head after the controller path that first created the head had been removed: BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core] Read of size 4 at addr ffff888141b14400 by task nvme/19811 nvme_command_effects+0x192/0x200 [nvme_core] nvme_cmd_allowed+0x7e/0x1b0 [nvme_core] nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core] nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core] Move the log cache to the subsystem, with one entry per command set. Both controllers and namespace heads hold subsystem references, keeping their log pointers valid until subsystem release. | ||||
| CVE-2026-98813 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Hold map BTF for the memory allocator destructor record bpf_ma_set_dtor() duplicates map->record so that the bpf_mem_alloc destructor can release the special fields of hash and rhash map elements once the allocator frees them for good. btf_record_dup() only acquires references on kernel and module BTF. Fields whose types live in the map BTF keep pointing into it: a kptr to a local type refers to map->btf, and a list_head or rb_root field carries a value_rec owned by the struct meta table of map->btf. That borrowed state can outlive the map. When RCU callbacks are still in flight, bpf_mem_alloc_destroy() copies the allocator and defers the final drain, together with the destructor context, to a workqueue. bpf_map_free() then frees map->record and drops the map's BTF reference as soon as map_free() returns. Once the program that loaded the BTF is gone as well, the BTF is freed while the worker still uses the duplicate. The worker dereferences it through btf_is_kernel() and btf_find_struct_meta() in bpf_obj_free_fields() when destroying elements that were freed under RCU, and through btf_is_kernel() in btf_record_free() when releasing the context itself: BUG: KASAN: slab-use-after-free in btf_is_kernel+0x19/0x30 Read of size 1 at addr ffff88811505dce8 by task kworker/u16:2/50 Workqueue: events_unbound free_mem_alloc_deferred Call Trace: btf_is_kernel+0x19/0x30 btf_record_free+0xc7/0xf0 htab_dtor_ctx_free+0x1a/0x30 free_mem_alloc_no_barrier+0x39/0x230 free_mem_alloc_deferred+0x2a/0x40 process_scheduled_works+0x5ce/0x9d0 worker_thread+0x42a/0x5e0 kthread+0x1f5/0x230 ret_from_fork+0x1dd/0x390 ret_from_fork_asm+0x1a/0x30 Allocated by task 358: __kmalloc_cache_noprof+0x287/0x510 btf_new_fd+0xf7/0x3d0 __sys_bpf+0x487/0x840 Freed by task 0: kfree+0x186/0x560 rcu_core+0x6f6/0xd40 Freeing a map that still holds more elements than the allocator's high watermark is enough to get there, because the bulk free during teardown queues the RCU callback that makes bpf_mem_alloc_destroy() defer. Non-preallocated hash maps and resizable hash maps both register the destructor and are affected alike. Keep one reference on the map BTF in the destructor context. Every non-kernel pointer in the duplicated record is either map->btf or memory owned by it, so a single reference covers kptrs, list heads, and rb roots, and mirrors what bpf_map_meta_alloc() does for the duplicated record of an inner map. Release it only after the duplicated record has been freed: the worker is preemptible and not in an RCU read-side critical section, so dropping the last reference first would let the BTF be freed while btf_record_free() still reads its fields. | ||||
| CVE-2026-98812 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mctp: publish the mctp_dev only after it is initialised mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev is assigned, so a reader that picks the device up in that window dereferences a net_device pointer that is still NULL: KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7] Call Trace: <TASK> ? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49) ? __pfx_mctp_dst_output (net/mctp/route.c:41) ? selinux_socket_sendmsg (security/selinux/hooks.c:5278) ____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790 (discriminator 1) net/socket.c:2684 (discriminator 1)) ? __pfx_____sys_sendmsg (net/socket.c:1131) ? __pfx_copy_msghdr_from_user (net/socket.c:2590) ? update_cfs_rq_load_avg (kernel/sched/fair.c:5478) ___sys_sendmsg (net/socket.c:2738) ? __pfx____sys_sendmsg (net/socket.c:2625) ? perf_event_task_tick (./include/linux/rcupdate.h:838) ? sched_tick (kernel/sched/core.c:5818) ? clockevents_program_event (kernel/time/clockevents.c:372) ? fdget (./include/linux/rcupdate.h:873 fs/file.c:1100) __sys_sendmsg (net/socket.c:2770) ? __pfx___sys_sendmsg (net/socket.c:2751) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fix by publishing only once the object is fully initialised: __mctp_dev_get() runs under rcu_read_lock() only and hands this object to readers as soon as mctp_ptr is assigned, so they must never observe mdev->dev == NULL. | ||||
| CVE-2026-98811 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: reclaim an empty proto on the error path Two racing tc filter add requests on the same chain/prio of an unlocked classifier both run change() on the shared proto and both can fail: the winner's tcf_chain_tp_delete_empty() attempt gives up because the loser's handle is still in the idr, and the loser's error path drops only its own reference without a second reclamation attempt. The empty proto stays linked in the chain, holding the chain reference, a block reference and the classifier module reference until the chain or block is torn down. Reclaim the proto on the error path of any failed request that holds a proto reference. The reclamation is emptiness-gated: tcf_chain_tp_delete_empty() unlinks the proto only when delete_empty() admits it is empty, so a live shared proto is never unlinked. A proto the request created is reclaimed unconditionally - it is the only owner, so marking it for deletion is safe even without a delete_empty callback. Classifiers without one (the check marks the proto unconditionally) are rtnl-serialized, so the raced window this guard closes cannot arise for them. This is a follow-up to commit d4e359b3608a ("net/sched: cls_api: fix teardown of an adopted proto on insert-race loss"), which stopped the loser of the insert race from unlinking the winner's live proto but left the empty-proto residual in place. Conditions to recreate: - CONFIG_NET_CLS_FLOWER=y; veth pair - tc qdisc add dev veth0 ingress - two concurrent `tc filter add dev veth0 ingress protocol ip pref 1 flower skip_sw ... action drop` (both fail in fl_hw_replace_filter after publishing their handle in the idr); repeat in a loop - an empty flower tp stays linked after both requests fail; visible as a bare `filter protocol ip pref 1 flower chain 0` header in `tc filter show` with no filter entries - CAP_NET_ADMIN (namespace-local via unshare -Urn suffices) | ||||
| CVE-2026-98810 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix slab-out-of-bounds read in ieee80211_monitor_select_queue() ieee80211_monitor_select_queue() validates the skb length using skb->len before dereferencing pointers into skb->data to access the 802.11 header. However, skb->len includes data in both the linear head buffer and non-linear fragments/pages. When AF_PACKET sends a packet large enough to become non-linear, the 802.11 header at skb->data + len_rthdr may extend past the linear head buffer even though skb->len appears sufficient. This leads to a slab-out-of-bounds read when accessing hdr->frame_control, as the kernel reads beyond the allocated skb head buffer: BUG: KASAN: slab-out-of-bounds in ieee80211_monitor_select_queue+0x1ed/0x220 syzbot has hit the same issues. Fix this by checking skb_headlen(skb) (which gives the length of the linear data region) instead of skb->len before dereferencing skb->data pointers. This ensures the required bytes are actually present in the linear portion of the skb. Apply the same fix to ieee80211_validate_radiotap_len() which has the same class of bug: it uses skb->len to validate accesses to skb->data, and to the corresponding checks in ieee80211_monitor_start_xmit(): for drivers advertising NETIF_F_SG the skb is not linearized before ndo_start_xmit, so the 802.11 header can be read past the linear buffer there as well. | ||||
| CVE-2026-98809 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister hci_unregister_dev() disables cmd_work and cmd_timer, then calls hci_cmd_sync_clear(), whose cancel_work_sync() waits for hci_cmd_sync_work() to return. That worker dequeues and runs every entry on cmd_sync_work_list. With cmd_work disabled nothing reaches the controller, so each queued HCI command waits the full HCI_CMD_TIMEOUT (2s). The backlog has no bound. Userspace can keep queuing MGMT commands such as MGMT_OP_GET_CLOCK_INFO against a controller that doesn't answer. Closing /dev/vhci then blocks in vhci_release() for backlog * 2s: INFO: task syz-executor:5749 blocked for more than 143 seconds. cancel_work_sync hci_cmd_sync_clear hci_unregister_dev vhci_release In a local reproduction the backlog held more than 5000 entries, which comes to hours of hang. Stop the worker from taking new entries once HCI_UNREGISTER is set, and wake any request still waiting with -ENODEV before cancelling the work. The entries left over are destroyed with -ECANCELED by the existing sweep in hci_cmd_sync_clear(). They stay on the list until the work has stopped, so hci_cmd_sync_dequeue() and friends still see them. A callback already running may still issue another command, which delays unregister by at most one timeout per remaining command, not by the whole backlog. | ||||
| CVE-2026-98808 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: systemport: Fix buffer overflow in bcm_sysport_get_stats() When running on SYSTEMPORT Lite, certain statistics are unsupported and skipped during bcm_sysport_get_stats(). The variable 'j' tracks the compacted index into the destination data buffer, whereas 'i' iterates over all elements in bcm_sysport_gstrings_stats. Because the buffer allocated by ethtool is sized only according to bcm_sysport_get_sset_count(), storing values at data[i] instead of data[j] writes past the allocated array bounds, leading to memory corruption. Fix this by writing to data[j] instead of data[i]. | ||||
| CVE-2026-98807 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds when handling team device events The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event() functions check for LAG masters (which includes both bonding and team devices) but only call bonding-specific APIs. When processing team device events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on team_port structures causes KASAN to detect an out-of-bounds memory access since team_port is smaller than bond slave. Fix this by wrapping the bond-specific API calls with a check for bonding devices. This allows the function to still process LAG events for both bonding and teams but only calls bond-specific functions when dealing with actual bonding devices. For mlx5_handle_changeinfodata_event(), keep the explicit bond check as mlx5 doesn't handle state information for team ports anyway. Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6: - Bonding: PASS (no regressions) - Team device: PASS (no KASAN errors) | ||||
| CVE-2026-98806 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled Previously, BPID assignment under CONFIG_DCB assumed `queue_to_pfc_map` was always initialized. For SDP VFs this leads to invalid memory access as it was not initialized. This patch adds a NULL check for `queue_to_pfc_map` before dereferencing it. Also, simplifies the logic by always assigning a default BPID first, then conditionally overriding it if CONFIG_DCB is enabled and the map exists. | ||||
| CVE-2026-98805 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: prevent GCM nonce reuse on peer key changes TIPC can encrypt traffic between nodes using a different transmit key for each node. In this mode, the AES-GCM nonce for a packet sent to a known peer consists of a 32-bit prefix (a per-key salt XOR the peer's address) followed by a 64-bit counter. That counter is stored in the peer's RX crypto object. When the peer reports a change in which key it uses to receive packets, TIPC resets this counter. The sender can still be using the same TX key and salt, so subsequent packets reuse earlier nonces. This nonce reuse breaks confidentiality and exposes GCM's authentication key. This makes forgeries trivial: an attacker can exploit CTR malleability to alter captured ciphertexts and use the recovered authentication key to compute a valid tag for the modified ciphertext, under the same key and nonce. Use the TX key's existing aead->seqno counter instead. All encryptions using that key object share the same atomic counter, so concurrent encryptions get distinct nonce counter values. The counter survives key activation and peer reconnection, and peer key-status reports cannot reset it. This prevents those transitions from causing nonce reuse while the same TX key remains installed. The nonce format is unchanged, and receivers do not require consecutive counter values, so sharing the counter across peers remains compatible with existing receivers. A pre-existing check still invokes key revocation in the unlikely event that the counter wraps to zero. | ||||
| CVE-2026-98804 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk() With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates the recycle stats after dropping the producer lock. If it just recycled the last inflight netmems of a pool being destroyed, page_pool_release() can pass its producer-lock barrier and free the pool before recycle_stat_add() runs. Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk") moved this stat update after the unlock. Commit 271683bb2cf32 ("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later added the barrier, but only fixed page_pool_recycle_in_ring(). Move the update back under the lock. | ||||
| CVE-2026-98803 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix rx Scatter-Gather support When a received frame is larger than dma_buf_sz, the DMA scatters it across multiple RX descriptors (rx Scatter-Gather). The secondary RX buffer (sec_page) was only allocated and programmed when split-header (SPH) was active, so for regular frames buffer2 was neither allocated nor backed by a valid mapping. As soon as an incoming frame overflowed buffer1, the DMA wrote the overflow into the unmapped secondary-buffer address, triggering an SMMU translation fault on IOMMU-based platforms: arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11 arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90 arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1] Enable scatter-gather for non-SPH frames on cores that can program an independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2 as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account for it in the buffer length computation. Legacy cores have no set_sec_addr op, so they keep buffer2 disabled. Since buffer2 is handed to the DMA at page offset 0, the page pool sync window is widened to cover both buffers in every mode: offset is set to 0 and max_len to dma_buf_sz + stmmac_rx_offset(). The FCS can straddle the buffer1/buffer2 boundary and a descriptor boundary, so it is now stripped from the tail of the assembled frame with pskb_trim() instead of from a single buffer, avoiding an unsigned underflow for frames that overflow a buffer by 1..3 bytes. For single-buffer frames the XDP program must not see the FCS, so it is removed from the XDP buffer before the program runs. Native XDP currently only supports single-buffer (linear) frames. An oversized frame accepted by the MAC (jumbo enabled) is received via buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict the frame is forwarded truncated. XDP multi-buffer support to handle this case is planned as a follow-up. AF_XDP zero-copy RX is not covered by this change: a ZC queue still programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit), so an oversized frame overflowing buffer1 can still trigger the same SMMU translation fault. Handling is planned as a follow-up. | ||||
| CVE-2026-98802 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writable() in advance_nextseg() and in seg6_next_csid_advance_arg() before they modify the packet data. skb_ensure_writable() may reallocate skb->head, which invalidates the pointers into the packet data taken before the call. advance_nextseg() now returns a valid SRH pointer, or NULL if skb_ensure_writable() fails. seg6_next_csid_advance_arg() takes the pointer to the destination address from the skb after skb_ensure_writable(). On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. | ||||
| CVE-2026-98801 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_RESERVE_MEM to TCP sockets and cap max value Commit 2bb2f5fb21b0 ("net: add new socket option SO_RESERVE_MEM") and commit d00c8ee31729 ("net: fix possible NULL deref in sock_reserve_memory") only checked sk_has_account(sk), which is true for both TCP and UDP sockets. However, SO_RESERVE_MEM and sk_unused_reserved_mem() are currently only supported by TCP: - On UDP sockets, sk->sk_forward_alloc is protected by sk->sk_receive_queue.lock, whereas sock_reserve_memory() and sock_release_reserved_memory() only acquire lock_sock(sk). Concurrent UDP packet reception/release and setsockopt(SO_RESERVE_MEM) corrupt sk_forward_alloc and memcg accounting. - udp_rmem_release() reclaims excess sk_forward_alloc without accounting for sk_unused_reserved_mem(sk). Restrict sock_reserve_memory() to TCP sockets (sk_is_tcp(sk)) for now. Supporting SO_RESERVE_MEM for UDP (acquiring sk_receive_queue.lock and honoring sk_unused_reserved_mem() in udp_rmem_release()) can be done in a future net-next series if needed. In addition, reject val > SZ_1G with -EINVAL in sk_setsockopt(SO_RESERVE_MEM). Without an upper bound, values near INT_MAX cause sk_mem_pages(delta) and (pages << PAGE_SHIFT) to overflow 32-bit signed int, corrupting sk->sk_forward_alloc and sk->sk_reserved_mem. Using a page-aligned cap (SZ_1G) ensures that the page-rounded sk->sk_reserved_mem reported by getsockopt(SO_RESERVE_MEM) can always be passed back to setsockopt(SO_RESERVE_MEM). | ||||
| CVE-2026-98800 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Wait for an RCU tasks grace period before freeing trampoline progs When a prog is detached from a trampoline, it is freed after an RCU grace period, or an RCU tasks trace one if it is sleepable. This covers the tasks that are running the prog, since the prog's enter helper takes the matching read lock before the prog is called. On a preemptible kernel, it doesn't cover a task that was preempted in the trampoline just before the enter helper. That task holds no lock yet, and it calls the prog after it was freed: BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_enter_recur+0x3a5/0x3f0 Read of size 8 at addr ffffc90000055040 by task candidate/110 CPU: 1 UID: 0 PID: 110 Comm: candidate Not tainted 7.3.0-rc2-00014-g15071f2a1263-dirty #2 PREEMPT(full) Call Trace: <TASK> __bpf_prog_enter_recur+0x3a5/0x3f0 bpf_trampoline_6442509193+0x37/0xf1 __x64_sys_futex+0x9/0x410 do_syscall_64+0xb0/0x530 ... Wait for an RCU tasks grace period before the existing one when freeing a prog that was linked to a trampoline. An RCU tasks grace period only ends once the tasks that were preempted have run again, and bpf_tramp_image_put() already relies on it to free the image. It doesn't wait for tasks that sleep in the trampoline, the next commit takes care of those. Only progs that were linked to a trampoline can be called this way, so bpf_trampoline_add_prog() marks them and other progs are still freed as before. | ||||
| CVE-2026-98799 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip detached progs in trampoline images that are still in use bpf_tramp_image_put() makes sure a trampoline image is not freed while a task may still be running in it, but nothing similar is done for the progs called by that image. Detach drops the last prog reference right away and the prog is freed after grace periods, on the basis that a task still in the traced function skips the fexit progs once the nop at ip_after_call is patched to a jump. That leaves out a task sleeping in a sleepable prog that runs before the detached one, which no grace period waits for: CPU 0 CPU 1 in image I, sleeping in prog S detach P from I's trampoline -> new image, bpf_tramp_image_put(I) bpf_prog_put(P), last ref grace periods, P freed back from S __bpf_prog_enter(P) call P->bpf_func If S and P are fexit progs the task is already past the patched jump, and fentry only images don't have one. On x86 this is an int3 in poisoned bpf_prog_pack memory: Oops: int3: 0000 [#1] SMP NOPTI CPU: 18 UID: 0 PID: 94573 Comm: x169 Not tainted 6.18.44 #1 PREEMPT(lazy) RIP: 0010:0xffffffffc0601d8d Call Trace: <TASK> ? bpf_trampoline_6442515411+0x1a4/0x21b bpf_lsm_bprm_committed_creds+0x5/0x10 security_bprm_committed_creds+0x5f/0x70 begin_new_exec+0x2d6/0x410 ... We hit this in production when progs attached through trampolines got detached while their hooks were busy, and it was independently found with a fuzzer and KASAN. Have the JITs emit a patchable nop in front of each prog call sequence and record it in the image. When a prog is detached, patch its nop to a jump over the call sequence. Progs that stay attached keep running for the tasks that are in the image, and ip_after_call isn't needed anymore. The task can be in any image that isn't freed yet, not only in the current one. It sleeps in image I1 that calls S, P and Q, then P is detached and the trampoline moves to image I2, then Q is detached and its call is still in I1. So the trampoline keeps a list of its images until they are freed, and detaching a prog patches its nop in all of them. Images hold a reference on the trampoline for that long. On riscv and loongarch a jump of any range takes several instructions, and a task preempted in the middle of them could resume into half of the new sequence. The nop is a single instruction there, patched to a near branch through arch_bpf_trampoline_skip(). With the extra nops, BPF_MAX_TRAMP_LINKS progs no longer fit in a page on x86 and arm64 (and already didn't on powerpc), so lower the limit there like s390 does. | ||||
| CVE-2026-98798 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix NULL dereference in set_coalesce before first open The Rx ring priv and index are only set in bcmgenet_init_rx_ring(), which runs at open. Setting the Rx coalescing parameters on an interface that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences a NULL ring->priv. The oops happens with RTNL held, so networking stays stuck until a reboot: Unable to handle kernel paging request at virtual address 0000000000002788 pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 lr : bcmgenet_set_coalesce+0xe8/0x180 Call trace: bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P) __ethnl_set_coalesce.isra.0+0x490/0x570 ethnl_set_coalesce+0x48/0xc0 ethnl_default_set_doit+0xf4/0x230 genl_family_rcv_msg_doit+0xe8/0x160 genl_rcv_msg+0x220/0x2a0 netlink_rcv_skb+0x68/0x140 genl_rcv+0x40/0x60 netlink_unicast+0x338/0x3c0 netlink_sendmsg+0x19c/0x3f8 __sock_sendmsg+0x64/0xc0 __sys_sendto+0x124/0x198 __arm64_sys_sendto+0x30/0x48 Set priv and index at probe. Writing the registers while the interface is down is harmless because open resets the MAC and bcmgenet_init_rx_coalesce() reapplies the stored values. It was observed on a Raspberry Pi CM4, but should apply to all other genet devices. | ||||
| CVE-2026-98797 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: cap skb->queue_mapping when the tx queue is picked skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit() cleared the flag before sch_handle_egress() and only read it afterwards, so the flag was not confined to the xmit that set it: a nested xmit (mirred redirect or mirror, or a drop after skbedit) could set the flag and the outer xmit would consume it for an skb that never went through skbedit. A forwarded packet still carries the ingress NIC's rx_queue + 1 in skb->queue_mapping, so the outer device then indexes its tx queue state with that stale value. Taprio's child array q->qdiscs[] is sized to the device's queue count, so taprio_enqueue() indexes past its allocation and dereferences the result as a struct Qdisc *. We (ab)use the skb->nf_skip_egress which means "skip netfilter egress for this packet" to tag to "am I in tc egress?". Despite the overload I dont see it as a conflict since the marker is set only around the single sch_handle_egress() call and ingress path is guarded by tc_at_ingress. I will send a followup(net-next) patch once this hits net-next to rename the skb->nf_skip_egress bit/flag to skb->skip_egress Arm the flag only from the egress classifier that can use it: raise skip_txqueue from tcf_skbedit_act() only when it runs inside sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc classifier runs in q->enqueue(), after the tx queue has been picked, so a mapping it sets cannot affect the current packet; arming the flag there only pollutes it for a later xmit. Then own the flag for the xmit frame the egress hook runs in: save the incoming value and clear it just before sch_handle_egress(), and restore it after the hook - on the consumed (drop) path, or, in the same call that reads it, on the surviving path. The save and the restores stay inside the egress_needed_key static branch, so a packet pays for them only when egress hooks are active (2f1e85b1aee4). Store the value netdev_cap_txqueue() selected back into skb->queue_mapping in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so the skip_txqueue path never hands a later reader on the xmit path a mapping the device cannot serve. A store made still later in the same frame, by a tc BPF program attached to a transmit qdisc, is outside this path and is not re-capped; a separate followup will resolve that path. netdev_xmit_skip_txqueue() returns the previous flag value so the save-and-clear is one call, and a no-op stub is provided when CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so skb_at_tc_egress() is valid whenever the egress path is built. A local user in a network namespace can redirect a packet from a device with more TX queues to one with fewer after setting a mapping valid only on the larger device. That reaches these reads and, under KASAN, faults with "slab-out-of-bounds in taprio_enqueue". Conditions to recreate the bug: the report's own trigger is a local user with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed. With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y, CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y, CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb (2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb (num_tc 1, queues 2@0) and clsact on all three; then add an egress matchall filter on every device. On qa: "action skbedit queue_mapping 2 pipe action mirred egress redirect dev qb". On qb: "action mirred egress mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one packet out qa. qc's skbedit sets the flag while qb's outer xmit is in flight; without the fix qb consumes it and reads its two-entry taprio child array with the forwarded packet's stale mapping. A qc whose skb ---truncated--- | ||||
| CVE-2026-98796 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: allocate dummy netdev sooner The RX rings and the shared NAPI are carried by an internal "dummy" netdev (eth->dummy_dev). mtk_probe() creates that dummy device, and adds the shared tx/rx NAPI to it, only after the MAC netdevs have been registered. That order has been there since the MT7623 support was added and leaves a window in which the netdevs are visible to the network core before the shared NAPI and the dummy device exist. If anything brings the first netdev up during that window (e.g. netifd opening the WAN link the instant the interface is registered), the first-open path runs without them. On NETSYS v2 and later SoCs mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev == NULL: WARNING: CPU: ... Missing net_device from driver in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs (MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open instead calls napi_enable() on a napi_struct that netif_napi_add() has not initialised yet and dereferences a NULL napi->dev. Allocate the dummy netdev and add the shared tx/rx NAPI to it before the register_netdev() loop. Both the dummy-allocation failure and a register_netdev() failure now unwind through mtk_unreg_dev(), which unregisters the net_device notifiers and the netdevs registered so far, stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the dummy carrier is freed. A netdev that opened during the window can also have queued the frame-engine reset worker (via the tx watchdog or phylink), so the probe error path now cancels eth->pending_work before freeing the shared state, as mtk_cleanup() already does on remove. | ||||