Export limit exceeded: 395318 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395318 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90290 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: Restore DAIF state on error Sashiko AI has reported that if swsusp_mte_save_tags() for some reason fails we return from swsusp_arch_suspend() with DAIF being masked - that is not what we'd expect. Restore the saved DAIF state before returning from the error path. | ||||
| CVE-2026-90289 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Resize MST HDCP per-connector arrays to 32 AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of 32 connectors. But the way it's used is like MAX_DISPLAY_COUNT. Hence we're off by one with DRM core, which supports a max of 32 connectors. Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT to match its actual use, and increase the size to 32 to match the originally intended size. | ||||
| CVE-2026-90288 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure for_each_child_of_node_scoped() releases the node reference on scope exit, so the explicit of_node_put(np) in the devm_phy_create() error path drops it twice. Drop the redundant of_node_put() and let the scoped cleanup handle it. | ||||
| CVE-2026-90287 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: sunplus: fix error handling in sp_uphy_init() Fix the error paths of sp_uphy_init() to undo exactly what each stage did: return directly if clk_prepare_enable() fails, release only the clock if reset_control_deassert() fails, and jump to err_reset if update_disc_vol() fails so the clock and reset are not leaked. | ||||
| CVE-2026-90286 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx6: Use PFP on the compute queues too On GFX6, the compute rings use the same CP path as the graphics ring. The only difference is that they don't support draw commands. (As opposed to GFX7 and newer which have a separate command parser that is called MEC for compute queues.) This means that we have to take into consideration that the PFP also exists on compute queues on GFX6: Use PFP for register writes on both graphics and compute queues. In the pipeline sync, use the PFP to wait for the previous fence (and not the ME) to prevent the PFP from starting to execute the next submission while the ME is still in the previous submission. After a VM flush, emit PFP_SYNC_ME on compute queues as well. | ||||
| CVE-2026-90285 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time after releasing optrom_mutex. The repeated read is redundant and, unlike the first, runs without optrom_mutex held, exposing flash access to concurrent optrom operations. Drop the duplicate call. | ||||
| CVE-2026-90284 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: do not queue completed sysfs fallback requests fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to pending_fw_head. device_add() publishes the fallback loading interface, so a userspace helper which discovers the device by scanning sysfs can write 0 to the loading attribute and complete the request before it is queued as pending. In that interleaving firmware_loading_store() calls fw_state_done() while pending_list still points to itself, so it cannot remove an entry from pending_fw_head. The subsequent unconditional list_add() then queues an already-completed fw_priv. Once the request is released, pending_fw_head can retain a pointer to freed memory and the next fallback request can fault while validating the list. Only in-flight fallback requests need suspend or reboot abort handling. If the request is already DONE after device_add(), return success from the fallback path without sending another uevent, waiting again, or queueing it as pending. This preserves the invariant that pending_fw_head contains only active fallback requests. | ||||
| CVE-2026-90283 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: release subpool on fill_super failure hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size mount options are specified. hugepage_new_subpool() may also reserve huge pages for min_size. If root dentry creation fails after the subpool is created, the failure path frees the subpool with kfree(). This bypasses hugepage_put_subpool() and can leave min_size reservations charged. Use hugepage_put_subpool() on the failure path, matching the normal put_super path. | ||||
| CVE-2026-90282 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relying on the possibly uninitialized phy pointer. | ||||
| CVE-2026-90281 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend Runtime PM must be enabled before creating the PHY, since phy_create() only enables runtime PM on the PHY device if it is already enabled on this parent device. However, the runtime PM callbacks dereference the hsphy instance, which is not yet ready, leaving a window where a suspend callback may trigger a NULL pointer dereference. Take a runtime PM usage reference with pm_runtime_get_noresume() before enabling runtime PM and release it once the PHY has been created, so that no runtime suspend can run before the PHY is ready. This also prevents a short window where an unnecessary runtime suspend can occur. Use the devres-managed version to ensure PM runtime is symmetrically disabled during driver removal for proper cleanup. | ||||
| CVE-2026-90280 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend There is a small window where the runtime suspend callback may run after pm_runtime_enable() and before pm_runtime_forbid(). In this case, a crash occurs because runtime suspend/resume dereferences qmp->phy pointer, which is not yet initialized: `if (!qmp->phy->init_count) {` This can also happen if user re-enables runtime-pm via the sysfs attribute before qmp phy is initialized. Similarly to other qcom phy drivers, introduce a qmp->phy_initialized variable that can be used to avoid relying on the possibly uninitialized phy pointer. | ||||
| CVE-2026-90279 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: round bitmap stripes with sector division raid5_bitmap_sector_map() aligns the array range to full RAID5 stripe widths before converting it to component sectors. That width is chunk_sectors multiplied by the number of data disks, and it is not always a power of two. Reproduce with a 4-disk RAID5, 1024-sector chunks, and three data disks. The full-stripe width is 3072 sectors. For a one-sector write at array sector 3072, correct rounding gives array range [3072, 6144), which maps to component range [1024, 2048). The old round_down()/round_up() logic instead gives [1024, 4096), which maps to [0, 1024). Use sector_div() based arithmetic so the rounded range is aligned to the actual RAID5 stripe width. The deterministic mapper test now reports the fixed component range as [1024, 2048), while the old mask-based range was [0, 1024). | ||||
| CVE-2026-90278 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap before calling mddev_detach(). That made mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap was already disconnected from mddev. This was still safe for the legacy bitmap because bitmap_destroy() waits for behind writes itself. llbitmap keeps that wait in its ->wait_behind_writes() operation instead, while ->destroy() tears down the llbitmap storage. With the old ordering, RAID1 behind-write completions could still run after llbitmap storage had been freed. Call mddev_detach() before md_bitmap_destroy() so the common detach path can wait for behind writes while the bitmap is still alive. Only destroy the bitmap after those users are gone. | ||||
| CVE-2026-90277 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: prevent create failure bitmap UAF llbitmap_create() publishes mddev->bitmap before reading the bitmap superblock. This is needed because llbitmap_read_sb() can initialize a new bitmap and flush it through helpers that use mddev->bitmap. If llbitmap_read_sb() fails, the old cleanup dropped bitmap_info.mutex and freed llbitmap before clearing mddev->bitmap. Readers such as /proc/mdstat rely on bitmap_info.mutex to keep the bitmap pointer stable while collecting bitmap stats, so they could observe the stale pointer after the failed create path released the mutex. Clear mddev->bitmap while still holding bitmap_info.mutex, then free the failed llbitmap after dropping the mutex. This makes mutex-protected readers see either a live bitmap or no bitmap. | ||||
| CVE-2026-90276 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timer before flushing md_llbitmap_io_wq. However, daemon_work can still be queued or running after the timer has been deleted, and the daemon path can arm pending_timer again when it finds dirty chunks that are not ready to flush yet. If that happens during teardown, pending_timer can remain armed after llbitmap is freed and later dereference freed memory. Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting the timer, and make the timer and daemon paths stop queueing or rearming work once teardown starts. Cancel daemon_work before flushing the shared workqueue so no already queued daemon instance can race with the free. Use timer_shutdown_sync() so a daemon instance that passed the shutdown check before teardown cannot rearm the timer afterward. BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and updating the llbitmap superblock so the shutdown state is never loaded from disk or persisted to disk. | ||||
| CVE-2026-90275 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: don't set array_frozen in raid1_takeover() raid1_takeover() sets conf->array_frozen = 1 on the newly-allocated r1conf and nothing ever clears it, so every I/O to the array stalls permanently once _wait_barrier() sees it stuck at 1. This used to be harmless: level_store() called mddev_resume() right after pers->run(), which called raid1_quiesce(mddev, 0) and cleared array_frozen back to 0 regardless of what raid1_takeover() set. Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removed that quiesce(mddev, 0) call, so the pre-set now sticks. setup_conf() already zero-initializes the new r1conf via kzalloc, so just don't set array_frozen here. Same class of bug as commit 892da88d1cd9 ("md/raid10: fix a 'conf->barrier' leakage in raid10_takeover()"), also triggered by b39f35ebe86d. | ||||
| CVE-2026-90274 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup. | ||||
| CVE-2026-90273 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths. | ||||
| CVE-2026-90272 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: arm_pmuv3: Zero initialize hw_id branch stack field PERF_SAMPLE_BRANCH_HW_INDEX is supported by BRBE so hw_id is passed to userspace, but it's never set by the BRBE driver. Zero initialize it as it should be according to the docs: * For the architectures whose raw branch records are * already stored in age order, the hw_idx should be 0. It's probably too risky to remove PERF_SAMPLE_BRANCH_HW_INDEX from BRBE now in case anyone is setting it and reading the value, but zero initializing the whole struct also protects against the same issue with new fields that are added in the future. | ||||
| CVE-2026-90271 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt If a user unbinds an MSC after mpam_disable() has been run in response to an error interrupt then a dereference of a NULL pointer occurs as mpam_disable() sets the drvdata to NULL. Add an early return to the driver remove callback to avoid this. | ||||