Export limit exceeded: 394012 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (394012 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-67211 | 1 Apache | 1 Opennlp | 2026-09-16 | 7.5 High |
| OOM Denial of Service via Unbounded Map Pre-Sizing in Apache OpenNLP SymSpellModelSerializer Versions Affected: - 3.0.0-M4 - 3.0.0-M5 (The opennlp-spellcheck extension was introduced in 3.0.0-M4. Releases 1.x and 2.x do not contain the affected code.) Description: The SymSpellModelSerializer.create() method reads two 32-bit signed integer count fields (unigramCount and bigramCount) from a binary SymSpell model stream and passes each value directly to LinkedHashMap.newLinkedHashMap() after validating only that it is non-negative. No upper bound is applied, so the count is fully attacker-controlled when the model file originates from an untrusted source. A crafted .bin model file in which either count field is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) causes the map to be pre-sized to a capacity of 2^30 entries. The oversized backing array is allocated on the first put() into that map, requesting 4–8 GB depending on whether compressed oops are in effect, and the load fails with an OutOfMemoryError. Because the count fields sit immediately after a fixed-size header (magic, format version, three UTF strings, the configuration fields, and the edit-distance identifier) the attacker pays no meaningful size cost to weaponize a payload: a file of well under 100 bytes plus a single real entry is sufficient to crash a JVM that loads it. Any code path that deserializes a SymSpell model is affected, including SymSpellModels.deserialize(InputStream), SymSpellModels.fromBytes(byte[]), classpath model loading via SymSpellModelResolver.resolveByLanguage(String), the CorrectTextTool command-line tool, and model-archive loading through the registered ArtifactSerializer. The opennlp-spellcheck extension ships in the official OpenNLP binary distribution. The practical impact is denial of service against processes that load SymSpell model files from untrusted or semi-trusted origins. Mitigation: - 3.x users should upgrade to 3.0.0-M6. Note: The fix applies an upper bound to both count fields, checked before the map is pre-sized; counts that are negative or exceed the bound cause an IOException to be thrown and the read to fail fast with no large allocation. The bound is the existing AbstractModelReader.MAX_ENTRIES limit introduced earlie, which the current change promotes to public visibility so that serializers implementing their own binary format can share it. The default bound is 10,000,000, which is well above the entry counts of legitimate SymSpell dictionaries but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load larger dictionaries can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default. Note that this property is shared with the model-reader limit and raising it relaxes both. Users who cannot upgrade immediately should treat all SymSpell .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. | ||||
| CVE-2026-18061 | 2 Amazon, Aws | 2 Advanced Jdbc Wrapper, Aws Advanced Jdbc Wrapper | 2026-09-16 | 5.9 Medium |
| Improper restriction of XML external entity references in the RemoteQueryCachePlugin in AWS Advanced JDBC Wrapper 3.3.0 through 4.2.0 might allow an actor with write access to the shared cache infrastructure to disclose sensitive files from application hosts that read cached query results, including stored database and IAM role credentials, via crafted XML data in a cached column value. To remediate this issue, users should upgrade to version 4.3.0 or later. | ||||
| CVE-2026-90771 | 1 Hapijs | 1 Joi | 2026-09-16 | 3.7 Low |
| joi before versions 17.13.8 and 18.2.9 contains a prototype pollution vulnerability in the messages compilation function that accepts __proto__ as an error code. Attackers can supply __proto__ keys in custom messages to replace the returned object's prototype, breaking downstream code relying on Object.prototype methods. | ||||
| CVE-2026-19666 | 1 Isc | 1 Bind | 2026-09-16 | 7.5 High |
| On a resolver configured to use ``dns64``, if an applicable answer from the authoritative server is malformed in a specific way, the resolver `named` process will exit unexpectedly. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-90562 | 1 Langbot | 1 Langbot | 2026-09-16 | 8.1 High |
| LangBot before 4.10.11 generates password recovery keys with only 24 bits of entropy and applies no rate limiting to the unauthenticated reset-password endpoint. Remote attackers knowing the administrator email can exhaust the keyspace through concurrent requests to reset the admin password and gain account access. | ||||
| CVE-2026-57442 | 2026-09-16 | N/A | ||
| MCPVault is a lightweight Model Context Protocol server for safe access to files in an Obsidian vault. Prior to 0.11.5, PathFilter in src/pathfilter.ts uses root-anchored deny-list patterns, so nested .git, .obsidian, and node_modules path segments do not match the restriction and pass both isAllowed() and isAllowedForListing(). An attacker who influences a path selected by an AI agent can traverse nested repository or Obsidian metadata, read remote URLs or embedded tokens, or cause nested node_modules content to pollute the listAllTags index. This issue is fixed in version 0.11.5. | ||||
| CVE-2026-82964 | 2026-09-16 | 8.8 High | ||
| Improper preservation of permissions in the Avast sandbox minifilter driver (aswSnx.sys) on Windows allows a local, low-privileged attacker executing inside the sandbox to escape file isolation and escalate to SYSTEM. When the sandbox virtualizes a file it copies the original security descriptor, but the driver opened the virtualization target object with GENERIC_WRITE and FILE_WRITE_ATTRIBUTES only, omitting WRITE_DAC. Every attempt to apply the original DACL therefore failed, and the failure was discarded silently, leaving virtualized copies of sensitive files with permissive permissions. Because the IRP_MJ_CREATE callback additionally did not strip WRITE_DAC for sensitive directories, a sandboxed process could rewrite the security descriptor of a virtualized object, read the virtualized copy of the SAM database, extract local NTLM password hashes and execute code as SYSTEM. The absence of an IRP_MJ_SET_SECURITY callback in the driver's operation registration table is a related defense-in-depth gap, but it is not the control that prevents this attack. | ||||
| CVE-2026-59318 | 2 Spring, Vmware | 2 Spring Ai, Spring Ai | 2026-09-16 | 6.5 Medium |
| In Spring AI's tool calling support, the per-request tool list is advertised to the model as a boundary but is not fully enforced when a tool call is dispatched. Under certain conditions, a tool that was not made available to the current request could be invoked, potentially leading to privilege escalation. Affected versions: Spring AI: 2.0.0 Spring AI: 1.1.0 through 1.1.8 Spring AI: 1.0.0 through 1.0.9 | ||||
| CVE-2026-89776 | 1 Linux | 1 Linux Kernel | 2026-09-16 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: enforce exact length of GROUP/GROUP6 attributes The VXLAN VNI filter entry policy declares the GROUP/GROUP6 address attributes as NLA_BINARY with only a maximum length, so validate_nla() accepts a payload shorter than the address. The GROUP consumer reads it with nla_get_in_addr(), an unconditional 4-byte load, so a short attribute over-reads up to 3 bytes of uninitialised slab data, which are stored into remote_ip and echoed back via RTM_GETTUNNEL, disclosing kernel memory. Switch both entries to NLA_POLICY_EXACT_LEN() so the validator rejects any GROUP/GROUP6 that is not exactly 4 / 16 bytes; a valid address is always sent at full width. | ||||
| CVE-2026-92365 | 1 Vllm-project | 1 Vllm | 2026-09-16 | 4.3 Medium |
| A vulnerability was found in vllm-project vllm up to 0.29.0. Affected by this issue is some unknown functionality of the file vllm/v1/sample/thinking_budget_state.py. The manipulation results in inefficient algorithmic complexity. It is possible to launch the attack remotely. The pull request to fix this issue awaits acceptance. | ||||
| CVE-2026-78301 | 1 Isc | 1 Bind | 2026-09-16 | 5.8 Medium |
| A malformed zone may contain an NS or DNAME node above its origin, which `named` treats as a zone cut. If an attacker inserts a malformed zone into a BIND authoritative server (e.g., via zone transfer), queries for names inside the configured zone then lose authoritative status and return an out-of-zone delegation. On a server that also provides recursion BIND can follow this locally sourced cut and cache attacker-supplied data, affecting names outside the configured zone. This situation persists as long as the malformed zone remains in the zone database. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-77692 | 1 Isc | 1 Bind | 2026-09-16 | 7.5 High |
| An attacker can cause `named` to abort by sending a crafted DNS-over-HTTPS request with a cryptographically invalid SIG(0) record, and then closing the transport connection prematurely. This issue affects BIND 9 versions 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-19941 | 1 Isc | 1 Bind | 2026-09-16 | 5.9 Medium |
| An inapplicable NSEC record may be accepted by a `named` resolver as proof that no wildcard exists, which could allow an attacker at the same or an upstream level of the zone name to mask the existence of a victim's wildcard record. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-19662 | 1 Isc | 1 Bind | 2026-09-16 | 5.9 Medium |
| An attacker may be able to cause a `named` resolver to abort. The attack requires inducing the victim resolver to send multiple queries for a DNSSEC-signed zone hosted by an authoritative server under the control of the attacker. If the auth responds with a particular sequence of crafted answers, and those answers arrive in a particular order with particular timing, the `named` resolver will encounter a use-after-free bug, and abort. This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.27, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||
| CVE-2026-89332 | 2 Amazon, Aws | 2 Kiro Ide, Kiro Ide | 2026-09-16 | 5.5 Medium |
| Inclusion of functionality from an untrusted control sphere in the Kiro Powers feature in Amazon Kiro IDE before version 0.8.135 might allow remote unauthenticated actors to obtain sensitive information from a developer workstation. Crafted repository content can cause the agent to modify the workspace settings file, which redirects the Kiro Powers registry request to an actor controlled endpoint and sends workspace data to that endpoint when the Powers panel is opened. To remediate this issue, users should upgrade to Kiro IDE version 0.8.135 or later. Users who opened a project in an earlier version should also rotate any credentials that were present in that project. | ||||
| CVE-2026-84603 | 1 Apple | 3 Ios And Ipados, Visionos, Watchos | 2026-09-16 | N/A |
| A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 27 and iPadOS 27, visionOS 27, watchOS 27. An app may be able to access sensitive user data. | ||||
| CVE-2026-43697 | 1 Apple | 1 Macos | 2026-09-16 | N/A |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Processing a maliciously crafted 3D file may lead to an out-of-bounds read. | ||||
| CVE-2026-43696 | 1 Apple | 1 Macos | 2026-09-16 | N/A |
| An authorization issue was addressed with improved entitlement checks. This issue is fixed in macOS Golden Gate 27. An app may be able to capture Touch Bar content without authorization. | ||||
| CVE-2026-49114 | 2 Linuxfoundation, Onnx | 2 Onnx, Onnx | 2026-09-16 | 7.1 High |
| In ONNX before 1.21.0, the 'save_external_data' function builds the external-data file path from the model's external_data location field and opens it for writing without 'O_NOFOLLOW/O_EXCL', after a non-atomic 'os.path.isfile()' check. A local attacker with write access to the directory where a victim serializes external data can deterministically pre-plant a symlink that is being followed, causing the victim's write to append to any file the victim can write, e.g. ~/.ssh/authorized_keys, cron files, or application configs. Fixed in 1.21.0. | ||||
| CVE-2026-81736 | 1 Isc | 1 Bind | 2026-09-16 | 7.5 High |
| If a BIND resolver has cached a tree of SVCB/HTTPS AliasMode records, and is then queried for the root of that tree, the resolver will spend disproportionate CPU time constructing the response. This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.27, 9.21.0 through 9.21.25, 9.18.11-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.27-S1. | ||||