| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Deadlock in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Move cp cleanup out of not operational
The fsm_notoper() routine is called when the device has been
lost, and is (by definition) no longer operational. Since this
can happen asynchronously from the normal behavior of the
driver, the cleanup may happen when holding other locks
in the calling sequence (notably, the cio subchannel lock).
Push the cleanup of the private->cp resources to a workqueue,
where it can be done out from under that lock sequence and
a future patch can safely manage the locking requirements. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: avoid deadlock when canceling IRQ affinity notifier
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: defer invalid log until after unlock
TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock
is still held.
When invalid logging is routed to nfnetlink_log and conntrack export is
enabled, the log path can re-enter conntrack netlink glue and dump the
same conntrack again. Protocol attribute dumping may take ct->lock, so
logging while holding that lock can deadlock.
Defer the TCP invalid logs by storing only the minimal log context while
ct->lock is held and emitting the log after unlocking. Also make the TCP
timeout-lowering invalid path return whether a log is needed, then emit
that log after unlocking.
Do the same for the SCTP invalid state-transition log that can be reached
while ct->lock is held.
Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers
that log invalid conntracks while holding ct->lock are caught outside TCP
and SCTP as well. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Take mmap_lock in zap_pages()
zap_vma_range() requires the owning mm's mmap_lock to be held.
Taking mmap_read_lock under arena->lock would AB-BA against
arena_vm_close() and arena_map_mmap(), both of which run with
mmap_write_lock held and then acquire arena->lock. Instead drop
arena->lock, mmget_not_zero() the vma's mm, take mmap_read_lock, and
re-resolve the vma via find_vma() since it may have been unmapped or
replaced while waiting.
Track processed vmls with a per-call generation in vml->zap_gen and
serialize zap_pages() callers with a new arena->zap_mutex so
concurrent callers on different uaddr ranges do not mark each other's
vmls processed before the zap is done. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Hold device ref until queue teardown completes
GuC exec queue destruction can run asynchronously. If the final device
put happens from a destroy worker, drmm cleanup can end up draining
the same workqueue and deadlock.
Hold a drm_device reference for the queue lifetime and drop it after
queue teardown completes. This keeps drmm cleanup from running while
async destroy work is still pending.
Move GuC destroy work to a module-lifetime Xe workqueue and flush it
on PCI remove so hot-unbind/rebind still waits for pending destroy work.
With queue-held device refs, guc_submit_sw_fini() cannot run with live
GuC IDs. Replace the fini wait with an assertion and remove the unused
fini_wq.
v2:
- Rebase
v3:
- Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt)
- Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt)
- Drop separate deferred drm_dev_put worker.
- Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini().
v4:
- Replace the guc_submit_sw_fini() wait with an assertion and remove
the now-unused fini_wq. (sashiko)
v5:
- Move destroy work to a module-lifetime Xe workqueue instead of
system_dfl_wq. (Matt)
- Flush the module-lifetime destroy workqueue during PCI remove to
preserve the old device-remove wait semantics.
v6:
- Keep SVM pagemap destroy work on the per-device destroy_wq to avoid
letting it outlive the xe_device/drm_device. (Sashiko)
- Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work
can be queued from the reclaim path.
v7:
- Drop the per-device xe->destroy_wq and use the module-level destroy WQ
for SVM pagemap destroy as well. (Matt)
- Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*()
helpers because the WQ is no longer exec-queue specific. (Matt)
v8:
- Rebase.
v9:
- Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM
destroy_wq because it can be queued from reclaim and embeds
the dev_pagemap used by devres teardown. (Sashiko)
- Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM
from it.
- Update the module-WQ kdoc to document the GuC/SVM split.
v10:
- Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the
workqueue allocation warning.
v11:
- Drop the SVM pagemap destroy comment as it was revision-specific.
(Thomas)
v12:
- Rebase.
(cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb) |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix recursive locking deadlock in audit_dupe_exe()
A deadlock occurs in the audit subsystem when duplicating
executable-related rules.
When a file is moved (e.g., via do_renameat2()), the VFS layer locks
the parent directory (I_MUTEX_PARENT), which synchronously triggers an
fsnotify_move event. If an existing executable audit rule matches the
file being moved, the audit subsystem catches this event and calls
audit_dupe_exe() to duplicate the watch and update the rule. Then,
audit_alloc_mark() would call kern_path_parent() to resolve the path,
leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock
already held by the task, resulting in the following recursive locking
deadlock:
============================================
WARNING: possible recursive locking detected
6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted
--------------------------------------------
mv/5099 is trying to acquire lock:
ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: __kern_path_locked+0x10a/0x2f0
but task is already holding lock:
ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3},
at: lock_two_directories+0x13f/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
lock(&inode->i_sb->s_type->i_mutex_dir_key/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by mv/5099:
#0: ffff888112a9c440 (sb_writers#13)
at: do_renameat2+0x34c/0xbc0
#1: ffff888112a9c790 (&type->s_vfs_rename_key#3)
at: do_renameat2+0x415/0xbc0
#2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1)
at: lock_two_directories+0x13f/0x2b0
#3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5)
at: lock_two_directories+0x175/0x2b0
#4: ffffffffb3a1fb10 (&fsnotify_mark_srcu)
at: fsnotify+0x454/0x28a0
#5: ffffffffaf886230 (audit_filter_mutex)
at: audit_update_watch+0x36/0x11e0
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_deadlock_bug.cold+0xbd/0xca
validate_chain+0x83a/0xf00
__lock_acquire+0xcac/0x1d20
lock_acquire.part.0+0x11b/0x360
down_write_nested+0x9f/0x230
__kern_path_locked+0x10a/0x2f0
kern_path_locked+0x26/0x40
audit_alloc_mark+0xfb/0x4f0
audit_dupe_exe+0x6c/0xe0
audit_dupe_rule+0x6c2/0xc00
audit_update_watch+0x4cc/0x11e0
audit_watch_handle_event+0x12c/0x1b0
send_to_group+0x5d0/0x8b0
fsnotify+0x615/0x28a0
fsnotify_move+0x1d8/0x630
vfs_rename+0xdcd/0x1df0
do_renameat2+0x9d4/0xbc0
__x64_sys_renameat+0x192/0x260
do_syscall_64+0x92/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f0491fe8c4e
Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff
c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48>
3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89
RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e
RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a
R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c
</TASK>
The aforementioned deadlock can be consistently reproduced by running
the script below:
audit-dupe-exe-deadlock.sh
--------------------------
#!/bin/bash
auditctl -D
mkdir -p /tmp/foo
touch /tmp/file
auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr
mv /tmp/file /tmp/foo/file
rm -Rf /tmp/foo
This patch fixes the issue by introducing struct audit_watch_ctx to pass
the fsnotify event context down to audit_alloc_mark(). By utilizing the
already-resolved directory inode provided by the event, we bypass the
kern_path_parent() path resol
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Use spin_lock_bh for hn_lock
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in
send_sigio() and send_sigurg() when a process group receives a signal.
When FASYNC is configured for a process group (PIDTYPE_PGID), both
functions use read_lock(&tasklist_lock) to traverse the task list.
However, they are frequently called from softirq context:
- send_sigio() via input_inject_event -> kill_fasync
- send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ)
The deadlock is caused by the rwlock writer fairness mechanism:
1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait().
2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in
fork() or exit() and spins, which blocks all new readers.
3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception).
4. The softirq calls send_sigurg() and attempts to acquire
read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting.
Since PID hashing and do_each_pid_task() traversals are already
RCU-protected, the read_lock on tasklist_lock is no longer strictly
required for safe traversal. Fix this by replacing tasklist_lock with
rcu_read_lock(), aligning the process group signaling path with the
single-PID path. This also mitigates a potential remote denial of
service vector via TCP URG packets.
Lockdep splat:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[...]
Chain exists of:
&dev->event_lock --> &f_owner->lock --> tasklist_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(tasklist_lock);
local_irq_disable();
lock(&dev->event_lock);
lock(&f_owner->lock);
<Interrupt>
lock(&dev->event_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - fix circular locking dependency with ff-core
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible deadlock between unlink and dio_end_io_write
ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,
while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.
This creates an ABBA lock ordering violation on lock classes
ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and
ocfs2_file_ip_alloc_sem_key.
Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):
ocfs2_unlink
ocfs2_prepare_orphan_dir
ocfs2_lookup_lock_orphan_dir
inode_lock(orphan_dir_inode) <- lock A
__ocfs2_prepare_orphan_dir
ocfs2_prepare_dir_for_insert
ocfs2_extend_dir
ocfs2_expand_inline_dir
down_write(&oi->ip_alloc_sem) <- Lock B
Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem) <- Lock B
ocfs2_del_inode_from_orphan()
inode_lock(orphan_dir_inode) <- Lock A
Deadlock Scenario:
CPU0 (unlink) CPU1 (dio_end_io_write)
------ ------
inode_lock(orphan_dir_inode)
down_write(ip_alloc_sem)
down_write(ip_alloc_sem)
inode_lock(orphan_dir_inode)
Since ip_alloc_sem is to protect allocation changes, which is unrelated
with operations in ocfs2_del_inode_from_orphan. So move
ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: do_close_on_exec() before taking exec_update_lock
do_close_on_exec() currently happens while holding the exec_update_lock,
which is used in a lot of places that access process state to
synchronize access checks.
I recently added another such use of exec_update_lock, causing a
regression.
do_close_on_exec() can block waiting for a reply from a filesystem.
That means a hung filesystem can block codepaths that use
exec_update_lock; and it also means that a FUSE filesystem which
attempts to inspect the calling process can deadlock.
To avoid such problems, move do_close_on_exec() before the
exec_update_lock is taken, but after the FD table has been copied if
necessary.
I have looked through all the calls between the old and new position of
the do_close_on_exec() call; there seems to be no file descriptor table
access in between. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/uverbs: Fix mmap_lock/disassociation_lock circular dependency
Commit 51976c6cd786 ("RDMA/core: Provide rdma_user_mmap_disassociate()
to disassociate mmap pages") introduced disassociation_lock to protect
new mmap registrations against uverbs_user_mmap_disassociate(), but
created an ABBA deadlock:
Thread A (mmap / fork):
mmap_lock -> disassociation_lock
Thread B (disassociate):
disassociation_lock -> mmap_lock
Fix by removing disassociation_lock entirely and using the pre-existing
hw_destroy_rwsem instead. hw_destroy_rwsem already provides the same
protection: rdma_umap_open() and ib_uverbs_mmap() both use
down_read_trylock() before registering a new VMA, so holding hw_destroy_rwsem
in uverbs_user_mmap_disassociate() is sufficient to block new registrations.
trylock is used in both mmap paths (not blocking down_read) because
mmap_lock is already held on entry, and uverbs_user_mmap_disassociate()
acquires mmap_lock internally — a blocking read would recreate the same
deadlock.
The only caller that was not taking hw_destroy_rwsem for write was
rdma_user_mmap_disassociate(). Fix it to take the rwsem per-ufile while
iterating under lists_mutex. This is safe because ib_uverbs_close()
releases hw_destroy_rwsem entirely before acquiring lists_mutex, so the
two locks are never held simultaneously.
lockdep warning:
[ 776.654252] ======================================================
[ 776.655214] WARNING: possible circular locking dependency detected
[ 776.656167] 6.18.0for-upstream_debug_94e244d9ccab #1 Not tainted
[ 776.657114] ------------------------------------------------------
[ 776.658087] devlink/14824 is trying to acquire lock:
[ 776.658879] ffff88811170c800 (&mm->mmap_lock){++++}-{4:4}, at: uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.660479]
[ 776.660479] but task is already holding lock:
[ 776.661460] ffff888142d92b08 (&file->disassociation_lock){+.+.}-{4:4}, at: uverbs_user_mmap_disassociate+0x39/0x780 [ib_uverbs]
[ 776.663177]
[ 776.663177] which lock already depends on the new lock.
[ 776.663177]
[ 776.664525]
[ 776.664525] the existing dependency chain (in reverse order) is:
[ 776.665724]
[ 776.665724] -> #2 (&file->disassociation_lock){+.+.}-{4:4}:
[ 776.666887] __mutex_lock+0x16d/0x2330
[ 776.667633] rdma_umap_open+0x129/0x280 [ib_uverbs]
[ 776.668489] dup_mmap+0xa40/0x1790
[ 776.669170] copy_process+0x5dd2/0x6170
[ 776.669933] kernel_clone+0xb6/0x610
[ 776.670636] __do_sys_clone+0xb5/0xf0
[ 776.671354] do_syscall_64+0x70/0x12e0
[ 776.672083] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.672940]
[ 776.672940] -> #1 (&mm->mmap_lock/1){+.+.}-{4:4}:
[ 776.673985] down_write_nested+0x90/0x1e0
[ 776.674751] dup_mmap+0x201/0x1790
[ 776.675448] copy_process+0x5dd2/0x6170
[ 776.676180] kernel_clone+0xb6/0x610
[ 776.676904] __do_sys_clone+0xb5/0xf0
[ 776.677615] do_syscall_64+0x70/0x12e0
[ 776.678351] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 776.679239]
[ 776.679239] -> #0 (&mm->mmap_lock){++++}-{4:4}:
[ 776.680253] __lock_acquire+0x18c6/0x2ec0
[ 776.681018] lock_acquire+0x10e/0x2e0
[ 776.681742] down_read+0x95/0x430
[ 776.682395] uverbs_user_mmap_disassociate+0x168/0x780 [ib_uverbs]
[ 776.683436] uverbs_destroy_ufile_hw+0x1ae/0x270 [ib_uverbs]
[ 776.684416] ib_uverbs_remove_one+0x22b/0x420 [ib_uverbs]
[ 776.685371] remove_client_context+0xa6/0xf0 [ib_core]
[ 776.686342] disable_device+0x12b/0x240 [ib_core]
[ 776.687249] __ib_unregister_device+0x269/0x460 [ib_core]
[ 776.688233] ib_unregister_device+0x21/0x30 [ib_core]
[ 776.689140] mlx5r_remove+0xd0/0x170 [mlx5_ib]
[ 776.689999] device_release_driver_internal+0x3b2/0x5
---truncated--- |
