| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Invalid pointer, undefined behavior in the DOM: Notifications component. This vulnerability was fixed in Firefox 158 and Thunderbird 158. |
| JIT miscompilation in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a remote BGP peer to cause an rpd crash via an LLGR-stale route update readvertised to a configured non-LLGR peer group. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: strip GSO state from fragments before reassembly
A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark
an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off.
inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first
fragment's skb as the head of the reassembled datagram, including its
shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments
on frag_list with whatever linear/paged layout they arrived with.
After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the
reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and
the next software segmentation point - udp_rcv_segment() on local
delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow
path - hands it to skb_segment(). skb_segment()'s frag_list walk
assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to
a tap by an unprivileged user in its own userns are enough:
kernel BUG at net/core/skbuff.c:4899!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2
RIP: 0010:skb_segment+0x20ca/0x48b0
Call Trace:
<TASK>
__udp_gso_segment+0x29a/0x27d0
udp4_ufo_fragment+0x458/0x6c0
inet_gso_segment+0x429/0x1340
skb_mac_gso_segment+0x233/0x4f0
__skb_gso_segment+0x308/0x660
udp_queue_rcv_skb+0x440/0xad0
udp_unicast_rcv_skb+0xc7/0x2c0
udp_rcv+0x16ce/0x2260
ip_protocol_deliver_rcu+0x197/0x2d0
ip_local_deliver+0x430/0x690
ip_rcv+0x16f/0x1f0
__netif_receive_skb_one_core+0x15e/0x1c0
__netif_receive_skb+0x1e/0x110
netif_receive_skb+0xf6/0x5c0
tun_rx_batched.isra.0+0x3ab/0x790
tun_get_user+0x17c3/0x3550
tun_chr_write_iter+0xba/0x1b0
vfs_write+0x646/0x1130
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
This runs with BH disabled, so it is a panic rather than an oops. The
same is reachable with CAP_NET_RAW in a netns where a defrag point
precedes a GSO point, and from a guest whose VMM forwards
virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by
commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting
gso_size mangled skb having linear-headed frag_list") and by
commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head
alloc types") do not cover it: page-backed heads skip them, and kmalloc
heads skip them when gso_size == skb_headlen(head), which the sender
controls.
An skb entering a frag queue is an IP fragment by definition and
cannot legitimately carry GSO state: GRO does not merge fragments and
the stack segments before it fragments, so only untrusted sources are
affected. This has been reachable since
commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first
path that let userspace attach GSO metadata to an IP fragment. Reset
the GSO fields of every fragment as it is queued, in
inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and
6lowpan reassembly share; then neither the head nor the frag_list
members of the reassembled skb carry them (the members matter too:
the ip_do_fragment()/ip6_fragment() fast paths send them out as they
are). The head may remain CHECKSUM_PARTIAL; that is already accepted
on receive and resolved by skb_checksum_help() in
ip_do_fragment()/ip6_fragment() on forward.
Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer
above, two further IPv4 frag_list geometries that reach
BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6
fragment-header variant (udp6_ufo_fragment()) each panic the unpatched
kernel; with this patch all four datagrams are delivered intact and
nothing is logged. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: options: reset DSS fields in case of unexpected size
A remote peer could send a malformed DSS with a wrong size, followed by
another DSS or MPC + Data. In this case, the first suboption will be
ignored, but leaving some fields written, which could lead to
inconsistency or access uninitialized data.
Explicitly reset the fields that could have been modified in case of
unexpected size. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix potential use-after-free in audit_del_rule()
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix RB-tree corruption in probe error path
The info->node RB-tree member is zero-initialized via kzalloc. If
a device does not support ATS, the device_rbtree_insert() call is
skipped. If a subsequent probe step fails, the error path jumps to
device_rbtree_remove(), which misinterprets the zeroed node as
a tree root and corrupts the device RB-tree.
Fix this by explicitly initializing the RB-node as empty using
RB_CLEAR_NODE() during initialization and guarding the removal with
RB_EMPTY_NODE(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - restore callback for non-parallel fallback
pcrypt installs pcrypt_aead_done() on the child AEAD request before
trying to submit it through padata. If padata_do_parallel() returns
-EBUSY, pcrypt falls back to calling the child AEAD directly.
That fallback must not keep the padata completion callback. Otherwise
an asynchronous completion runs pcrypt_aead_done() even though the
request was never enrolled in padata.
Restore the original request callback and callback data before calling
the child AEAD directly. This keeps the fallback path aligned with a
direct AEAD request while leaving the parallel path unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
The driver, through the SAS transport, exposes a sysfs interface to
enable/disable PHYs in a controller/expander setup. When multiple PHYs
are disabled and enabled in rapid succession, the persistent and current
config pages related to SAS IO unit/SAS Expander pages could get
corrupted.
Use separate memory for each config request. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Ignore frags from uninitialized peer in dp.
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In this certain scenario, a fragmented packet is received for
self peer, for which rx_tid and rx_frags are not initialized in
datapath. While handling this fragment, crash is observed as the
rx_frag list is uninitialised and when we walk in
ath11k_dp_rx_h_sort_frags, skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
ath11k_dp_process_rx_err+0x550/0x1084 [ath11k]
ath11k_dp_service_srng+0x70/0x370 [ath11k]
0xffffffc009693a04
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
start_kernel+0x480/0x4b8
Code: f9400281 f94066a2 91405021 b94a0023 (f9406401)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix return status of RMI log page on allocation failure
nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS
(set by the successful nvmet_req_find_ns() call) when the kzalloc() for
the log buffer fails. It then jumps to the out label and completes the
request with a success status, so the host is told the command succeeded
while no data was transferred.
Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler,
so an allocation failure is reported as an internal error. |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: clear stale link state on full reset
After a full chip reset, mac80211 reconfig replays interface, link and
channel context setup. mt7996_vif_link_add() short-circuits when the
link_id is still marked in mvif->valid_links, a state introduced for
postponing link teardown to interface removal. The reset path frees the
link structures without clearing those bits, so the replayed setup never
re-creates dev_info/bss_info/STA records in the restarted firmware and
never re-registers the link wcid, leaving the device inoperative.
The reset path also leaks every allocated MLD index: per-link indices
and the per-vif group/remap indices are re-allocated from scratch during
reconfig, but the old bits stay set in the masks, so repeated full
resets exhaust the index space.
Clear valid_links in the reset vif iterator and reset the MLD index
masks alongside the existing omac_mask clearing. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: hwmon: Remove hwmon class device along with its parent
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/
because the type is "acpitz" for both of them, but it adds a sysfs
attribute that belongs to thermal_zone1 under it:
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp2_input
There is also
/sys/devices/virtual/thermal/thermal_zone0/hwmon0/temp1_input
which belongs to thermal_zone0.
When thermal_zone0 is removed, say because the ACPI thermal driver is
unbound from the underlying platform device, thermal_remove_hwmon_sysfs()
skips the removal of hwmon0 because of the temp2_input attribute
belonging to thermal_zone1 which effectively prevents thermal_zone0
removal from making progress.
Address this by making thermal_remove_hwmon_sysfs() remove the entire
hwmon class device interface for the given thermal zone type when the
thermal zone device holding it is removed.
To prevent races with thermal_add_hwmon_sysfs() that may interfere
with this, carry out the entire addition and removal of hwmon sysfs
interfaces for thermal zones under thermal_hwmon_list_lock.
Also adjust the layout of the labels in thermal_add_hwmon_sysfs() to
the current kernel coding style to align with the new "unlock" label. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable
In the perf enable path, there are missing cases where
cscfg_csdev_disable_active_config() is not called:
- Branch broadcast is selected but not supported by the hardware
- etm4_enable_hw() fails
This can lead to a leak of config_desc->active_cnt.
Fix this by properly calling cscfg_csdev_disable_active_config()
in these error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: Fix the condition to enable over-io-uring
The existing condition in fuse_uring_cmd() is there only to avoid
disabling io-uring for connections that already run with it, missing
was a condition to refuse any IORING_OP_URING_CMD if the
connection/channel didn't get enabled because of missing FUSE_INIT
reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in
fuse_uring_ready() doesn't work and IO could already be going on and
cause deadlock states (at a minimum one between fch->bg_lock and
queue->lock).
The change itself is trivial, but brings behavior change,
FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers
to accept any IORING_OP_URING_CMD. Libfuse does that and the only
non-libfuse implementation I found (fractal-fuse) also does it.
Qemu patches for fuse-io-uring are not merged yet, as far as I know.
Moved up is the smp_load_acquire(&fch->initialized) check, as a
fuse-server implementation might try to setup io-uring before FUSE_INIT
is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN.
Also fixed is a stale comment that explains the handling of the
FUSE_OVER_IO_URING flag in early RFC versions.
If there should be a report from any library or application we
probably need to revert this commit. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip double clone set expressions on element insert
Both the dynset and newsetelem path clone the existing set expressions
when setting set element expressions if no override expressions are
provided. This results in a double clone, once to clone the template set
expressions then another clone on the new element. Add a flag to
annotate if userspace provides a override expression (ie. expression of
the same type of the set but different configuration), otherwise borrow
the existing expression from the set. Add conditionals to release
expression iif they represent an override. Use this new override_exprs
flag to dump the dynset expression override to userspace.
This simplifies the existing logic and it also fixes a bug with the
connlimit expression which results in a module refcount imbalance
WARNING splat when resorting on the default set expressions. |
