| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service.
The impacted component is io.vertx:vertx-json-schema.
The following Vert.x modules depend on vertx-json-schema and are also affected:
io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: cap delegated inode count in ceph_parse_deleg_inos()
ceph_parse_deleg_inos() decodes interval sets of delegated inode numbers
from an MDS create-with-delegation reply. For each set it reads a 64-bit
start and a 64-bit len with ceph_decode_64_safe(), which only validates
that the eight bytes are present in the message, not the value, and then
loops over len while inserting entries into s_delegated_inos.
len is fully attacker controlled. A malicious or compromised MDS can send
one huge interval, many intervals in one reply, duplicate intervals, or
repeated replies that accumulate delegated inodes on the same session.
The original code bounded none of these and could spin the insert loop or
grow the xarray without limit.
Bound both dimensions with a single enforcement point. Track the number
of delegated inodes held by each MDS session in an atomic counter and
grow it only in ceph_insert_deleg_ino(), which uses atomic_add_unless()
to refuse to push the count past CEPH_MAX_DELEG_INOS. Because that helper
is the only place the counter grows, the per-session population can never
exceed the cap, so no separate per-session pre-check is needed. The
counter is decremented when async create consumes a delegated inode or
when an insert fails, incremented when a delegated inode is restored,
initialized with the session xarray, and reset when reconnect destroys
the xarray.
A per-session cap alone still lets one reply spin the insert loop on
duplicate ranges without growing the counter, so also cap the aggregate
interval length accepted from a single reply. Together these bound both
the loop trip count per reply and the xarray population across replies.
The cap is a fixed, client-chosen constant rather than a value derived
from the MDS. mds_client_prealloc_inos is a userspace MDS configuration
option; it is never sent to the kernel client on the wire, and a
server-supplied bound could not be trusted for a defensive limit in any
case. The constant is set well above that option's documented default of
1000 (a generous multiple), so legitimate refill behavior is unaffected
while the CPU and xarray memory a malformed delegation stream can consume
stays bounded.
Impact: a malicious or compromised Ceph MDS can no longer make a client
spin through an unbounded delegated-inode interval or grow one session's
delegated-inode xarray without limit. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: stop parsing UAC2 rates at MAX_NR_RATES
parse_uac2_sample_rate_range() caps the number of enumerated
rates at MAX_NR_RATES, but it only breaks out of the current
rate loop. A malformed UAC2 RANGE response with additional
triplets continues parsing the remaining triplets and repeatedly
prints "invalid uac2 rates" while probe still holds
register_mutex.
Stop the whole parse once the cap is reached and return the
number of rates collected so far. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. After fixing
CVE-2023-3446 it was discovered that a large q parameter value can also trigger
an overly long computation during some of these checks. A correct q value,
if present, cannot be larger than the modulus p parameter, thus it is
unnecessary to perform these checks if q is larger than p.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulnerable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the "-check" option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. One of those
checks confirms that the modulus ('p' parameter) is not too large. Trying to use
a very large modulus is slow and OpenSSL will not normally use a modulus which
is over 10,000 bits in length.
However the DH_check() function checks numerous aspects of the key or parameters
that have been supplied. Some of those checks use the supplied modulus value
even if it has already been found to be too large.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulernable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the '-check' option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31 and 6.9.13-56, a missing limit check in the MVG decoder allows a crafted MVG image to trigger an excessively long-running operation. This issue is fixed in versions 7.1.2-31 and 6.9.13-56. |
| This CVE ID has been rejected as a duplicate. |
| An issue was discovered in Django 6.0 before 6.0.9 and 5.2 before 5.2.18.
GeoDjango's `django.contrib.gis.geos.GEOSGeometry` is subject to a potential denial-of-service when parsing deeply nested `GEOMETRYCOLLECTION` objects supplied as well-known text (WKT), well-known binary (WKB), or hex-encoded WKB, which triggers unbounded recursion and a segmentation fault in the underlying GEOS library. Spatial field lookups and the `django.contrib.gis.forms.GeometryField` form field are also affected.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank Andrew MacPherson and kimchunbok_ for reporting this issue. |
| Microsoft Network Monitor file parser large loop in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31, a crafted XMP profile can trigger excessive work while the parser determines a rational value's numerator and denominator, causing denial of service. This issue is fixed in version 7.1.2-31. |
| In Bouncy Castle for Java before 1.86, the raw JCA provider's legacy PBES1 (PKCS#5 scheme 1) and PKCS#12 PBE families ran their password-based key derivation with an iteration count taken from untrusted input without bounding it, so a small input could dictate an arbitrary amount of work before anything could be verified. The AlgorithmParameters implementations (PKCS12PBE and its object identifier aliases, and PBKDF1) accepted any count from an encoded PKCS12PBEParams or PBEParameter, narrowing a value beyond the int range with intValue(), and every Cipher, Mac and SecretKeyFactory in these families derived with whatever count it was given, including one decoded by another provider's AlgorithmParameters, as when javax.crypto.EncryptedPrivateKeyInfo.getKeySpec() decrypts a PKCS#12 PBE-protected private key with BC. Both the parameter parse and the derivations now reject a negative or over-limit count under the org.bouncycastle.pbe.max_iteration_count property (default 10,000,000) that already bounded PBKDF2 (CVE-2026-17508), and the parse rejects a count beyond the int range rather than narrowing it. This issue also affects Bouncy Castle for Java LTS before 2.73.13. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.18.0, a crafted PDF containing indirect-object identifiers or generation-number tokens that continue for a long time without whitespace can cause pypdf/_reader.py and pypdf/generic/_base.py to scan excessive input through read_until_whitespace, resulting in long runtimes and application unavailability. This issue is fixed in version 6.18.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.19.0, a crafted PDF with form field values can cause pypdf/generic/_appearance_stream.py appearance-stream generation to repeat invariant selection-data work inside a loop when an application updates fields with flattening enabled, resulting in excessive runtimes and application unavailability. This issue is fixed in version 6.19.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.19.0, a crafted PDF containing many embedded files can cause the dictionary-based attachments API in pypdf/_doc_common.py to reparse the full attachment list for each content lookup, producing repeated work and long runtimes when an application accesses the embedded-file mapping. This issue is fixed in version 6.19.0. |
| PostCSS Selector Parser is a CSS selector parser that integrates with PostCSS but does not require it. Prior to 7.1.6, src/parser.js splitWord() can receive a flat selector as one word token carrying many class or ID indexes because period and hash characters are not tokenizer word delimiters. The uniqs() deduplication and per-index class and ID membership checks repeatedly scan the class and ID index arrays, while a separate Sass-interpolation filtering pass also performs repeated linear scanning. Together, these passes make parsing quadratic in the number of indexes and allow a crafted selector to occupy a synchronous parser thread. The maxNestingDepth guard does not mitigate the issue because the hostile selector can have zero nesting depth. Only consumers that synchronously parse untrusted selectors in an exposed request path are affected; ordinary build-time parsing of trusted sources is not affected. This issue is fixed in version 7.1.6. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_pie: clamp quantum in change path
fq_pie_change() accepts any quantum value from userspace, including 1.
With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1
makes the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change().
Conditions to recreate the bug:
CONFIG_NET_SCH_FQ_PIE=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root fq_pie
tc qdisc change dev dummy0 root fq_pie quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sfq: clamp quantum in change path
sfq_change() accepts any non-negative quantum (only rejects
(int)ctl->quantum < 0). With a crafted size table qdisc_pkt_len reaches
~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times
under the qdisc lock (a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change(). Reject quantum > 1<<20
with -EINVAL, matching fq_codel_change() and the init clamp.
Conditions to recreate the bug:
CONFIG_NET_SCH_SFQ=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root sfq
tc qdisc change dev dummy0 root sfq quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum in change and init paths
hhf_change() accepts any quantum from userspace, including 1. With a
crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes
the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp
hhf_init() to [256, 1<<20] matching the siblings, and remove the old
fallback that only set quantum=256 on overflow.
Conditions to recreate the bug:
CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root hhf
tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 |
| The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.21, 2.1.7, 3.0.9, and 5.0.12, the expand function handles untrusted {a},b}-shaped patterns with many trailing closing braces by restarting its scan once for each trailing closing brace. The successive full-input rescans with linear working-string growth cause quadratic CPU time and memory pressure that can block the Node.js event loop. The process eventually recovers, making the impact a recoverable CPU denial of service. This issue is fixed in versions 1.1.21, 2.1.7, 3.0.9, and 5.0.12. |
