| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix UAF in check_new_map() on session freed during unlock
check_new_map() iterates mdsc->sessions[] and for each active session
drops mdsc->mutex to perform per-session operations. The forced-close
path (rank removed from map) correctly takes a reference on s via
ceph_get_mds_session() before releasing mdsc->mutex, but three other
paths do not:
Path A (address changed): mutex_unlock → mutex_lock(&s->s_mutex)
Path B (reconnect): mutex_unlock → send_mds_reconnect(mdsc, s)
Path C (active transition): mutex_unlock → mutex_lock(&s->s_mutex)
Without the extra reference, another thread can acquire mdsc->mutex
during the unlock window, call __unregister_session() which drops the
last reference on s, and free it. The original thread then accesses
freed memory via s->s_mutex.
Fix by adding ceph_get_mds_session(s) before each mutex_unlock and
ceph_put_mds_session(s) after the corresponding mutex_lock, matching
the pattern already used in the forced-close path.
Race timeline (Path A):
Thread A (check_new_map) Thread B (another map update
holds mdsc->mutex or session teardown)
-------------------------- --------------------------
s = mdsc->sessions[i]
(refcount == 1, held only by
sessions[] array)
mutex_unlock(&mdsc->mutex)
---> acquires mdsc->mutex
__unregister_session(mdsc, s)
sessions[i] = NULL
ceph_put_mds_session(s)
refcount: 1 -> 0
kfree(s) <--- freed!
mutex_lock(&s->s_mutex)
UAF on freed s->s_mutex |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: flush works in dependency order
virtio_vsock_remove() stops the virtqueues and then flushes each work
item before freeing the enclosing virtio_vsock. The current order does
not account for dependencies between those items: tx_work may queue
send_pkt_work, and send_pkt_work may queue rx_work.
In particular, send_pkt_work can set restart_rx and release tx_lock.
The remove path can then stop the queues and flush rx_work before
send_pkt_work queues it. Although the later send_pkt_work flush waits
for that producer to finish, nothing waits for the newly queued rx_work,
so kfree(vsock) can race with it.
KASAN reported:
BUG: KASAN: slab-use-after-free in
virtio_transport_rx_work+0x487/0x4b0
Read of size 8 at addr ffff888114c2b008 by task kworker/1:1/47
Workqueue: virtio_vsock virtio_transport_rx_work
Call Trace:
virtio_transport_rx_work+0x487/0x4b0
process_one_work+0x688/0x1120
worker_thread+0x45b/0xd10
Allocated by task 1:
virtio_vsock_probe+0xef/0x6b0
Freed by task 84:
kfree+0x131/0x3c0
virtio_vsock_remove+0xd1/0x100
Flush the works in producer-to-consumer order. virtio_vsock_vqs_del()
has already disabled the queue callbacks and cleared the run flags, so
after tx_work and send_pkt_work are drained, no source remains that can
queue rx_work after its flush. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: fix unaligned memory access in timestamp adjustment
Use get_unaligned_be32() and put_unaligned_be32() to safely read and
write the timestamp fields. This prevents performance degradation due to
unaligned memory access or even a crash on strict alignment
architectures.
This follows the implementation of timestamp parsing in the networking
stack at tcp_parse_options() and synproxy_parse_options(). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: byd - synchronize timer deletion before freeing private data
byd_disconnect() uses timer_delete() before freeing the driver's private
data. This does not wait for a running byd_clear_touch() callback, which
dereferences the private data and its psmouse pointer. A callback racing
with disconnect can therefore access the private data after it has been
freed. The timer can also still be re-armed by byd_process_byte() while
the disconnect is in progress.
Use timer_shutdown_sync() before freeing the private data: it waits for
a running callback and turns any later re-arm attempt into a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: fix tx_hang_reset use-after-free on device removal
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pktgen: fix proc entry use-after-free
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: pin conn during async oplock break notification
smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn
pointer in an async ksmbd_work and then queue that work on ksmbd-io. The
work only increments conn->r_count, which prevents teardown from passing
the pending-request wait after the increment, but it does not pin the
struct ksmbd_conn object.
If connection teardown races with an oplock break notification, the last
conn reference can be dropped before the queued worker finishes. The
worker then uses the freed conn in ksmbd_conn_write() and
ksmbd_conn_r_count_dec().
Take a real conn reference when publishing the conn pointer to the async
work item, and drop it after the notification work has decremented
r_count. Apply the same lifetime rule to lease break notification, which
uses the same work->conn pattern. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: don't re-enter an instance callback that is still running
The userspace-driven timer (utimer) TRIGGER ioctl calls
snd_timer_interrupt() directly with no serialization, so two threads
triggering the same utimer can run snd_timer_interrupt() on one
snd_timer concurrently.
snd_timer_process_callbacks() drops timer->lock around each instance
callback and marks the in-flight callback with the single
SNDRV_TIMER_IFLG_CALLBACK bit; snd_timer_close_locked() waits on that
bit to drain an in-flight callback before freeing the instance. The bit
cannot represent two concurrent callbacks: when a second interrupt
re-queues an instance whose callback is still running, both run at once,
the first to finish clears the bit, and the close-path drain then frees
the instance (and its callback_data) while the other callback is still
live - a use-after-free reachable by any user able to open
/dev/snd/timer, both via a user timer instance and via a sequencer queue
timer bound to the utimer.
snd_timer_interrupt() sets IFLG_CALLBACK before dropping timer->lock, so
a concurrent interrupt already observes it under the lock. Skip
re-queuing an instance (and its slaves) to the ack/sack list while its
callback is in flight; the accumulated pticks are delivered on the next
tick, so no event is lost. |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent UAF caused by non-leader exec() race
Wongi and Jungwoo decoded and reported a non-leader exec() related race
which can result in an UAF:
sys_timer_delete() exec()
posix_cpu_timer_del()
// Observes old leader
p = pid_task(pid, pid_type); de_thread()
switch_leader();
release_task(old_leader)
__exit_signal(old_leader)
sighand = lock(old_leader, sighand);
posix_cpu_timers*_exit();
sighand = lock_task_sighand(p) unhash_task(old_leader);
sh = lock(p, sighand) old_leader->sighand = NULL;
unlock(sighand);
(p->sighand == NULL)
unlock(sh)
return NULL;
// Returns without action
if(!sighand)
return 0;
free_posix_timer();
This is "harmless" unless the deleted timer was armed and enqueued in
p->signal because on exec() a TGID targeted timer is inherited.
As sys_timer_delete() freed the underlying posix timer object
run_posix_cpu_timers() or any timerqueue related add/delete operations on
other timers will access the freed object's timerqueue node, which results
in an UAF.
There is a similar problem vs. posix_cpu_timer_set(). For regular posix
timers it just transiently returns -ESRCH to user space, but for the use
case in do_cpu_nanosleep() it's the same UAF just that the k_itimer is
allocated on the stack.
Also posix_cpu_timer_rearm() fails to rearm the timer, which means it stops
to expire.
While debating solutions Frederic pointed out another problem:
posix_cpu_timer_del(tmr)
__exit_signal(p)
posix_cpu_timers*_exit(p);
unhash_task(p);
p->sighand = NULL;
sh = lock_task_sighand(p)
sighand = p->sighand;
if (!sighand)
return NULL;
lock(sighand);
if (!sh)
WARN_ON_ONCE(timer_queued(tmr));
On weakly ordered architectures it is not guaranteed that
posix_cpu_timer_del() will observe the stores in posix_cpu_timers*_exit()
when p->sighand is observed as NULL, which means the WARN() can be a false
positive.
Solve these issues by:
1) Changing the store in __exit_signal() to smp_store_release().
2) Adding a smp_acquire__after_ctrl_dep() into the !sighand path
of lock_task_sighand().
3) Creating a helper function for looking up the task and locking sighand
which does not return when sighand == NULL. Instead it retries the
task lookup and only if that fails it gives up.
4) Using that helper in the three affected functions.
#1/#2 ensures that the reader side which observes sighand == NULL also
observes all preceeding stores, i.e. the stores in posix_cpu_timers*_exit()
and the ones in unhash_task().
#3 ensures that the above described non-leader exec() situation is handled
gracefully. When the task lookup returns the old leader, but sighand ==
NULL then it retries. In the non-leader exec() case the subsequent task
lookup will observe the new leader due to #1/#2. In normal exit() scenarios
the subsequent lookup fails.
When the task lookup fails, the function also checks whether the timer is
still enqueued and issues a warning if that's the case. Unfortunately there
is nothing which can be done about it, but as the task is already not
longer visible the timer should not be accessed anymore. This check also
requires memory ordering, which is not provided when the first lookup
fails. To achieve that the check is preceeded by a smp_rmb() which pairs
with the smp_wmb() in write_seqlock() in __exit_signal(). That ensures that
the stores in posix_cpu_timers*_exit() are visible.
The history of the non-leader exec() issue goes back to the early days of
posix CPU timers, which stored a pointer to the group leader task in the
timer. That obviously fails when a non-leader exec() switches the leader.
commit e0a70217107e ("posix-cpu-timers: workaround to suppress the problems
with mt exec") added a temporary workaround for that in 2010 which surv
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref
l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If
the connection is torn down while the timer is running or pending,
chan->conn can be freed, leading to a use-after-free when the timer
worker attempts to lock conn->lock:
| BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83
|
| CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full)
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
| Workqueue: events l2cap_chan_timeout
| Call Trace:
| <TASK>
| instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
| </TASK>
|
| Allocated by task 320:
| l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075
| l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452
| hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline]
| hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760
| hci_event_func net/bluetooth/hci_event.c:7796 [inline]
| hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847
| hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
|
| Freed by task 322:
| hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline]
| hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736
| hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405
| hci_dev_do_close net/bluetooth/hci_core.c:502 [inline]
| hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679
| vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690
| __fput+0x369/0x890 fs/file_table.c:510
| task_work_run+0x160/0x1d0 kernel/task_work.c:233
| get_signal+0xf5b/0x1120 kernel/signal.c:2810
| arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337
| __exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
| exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98
| do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100
| entry_SYSCALL_64_after_hwframe+0x77/0x7f
|
| The buggy address belongs to the object at ffff8881298d9400
| which belongs to the cache kmalloc-512 of size 512
| The buggy address is located 336 bytes inside of
| freed 512-byte region [ffff8881298d9400, ffff8881298d9600)
Fix it by having chan->conn hold a reference to l2cap_conn (via
l2cap_conn_get) when the channel is added to the connection, and
releasing it in the channel destructor. This ensures the l2cap_conn
remains alive as long as the channel exists.
A new FLAG_DEL channel flag is introduced to indicate that the ch
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: remove multicast group from hash table on device destruction
When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through
the multicast list and calls ip_ma_put() on each membership, scheduling
them for RCU reclamation. However, they are not unlinked from the device's
multicast hash table (mc_hash).
Since the device remains published in dev->ip_ptr until after
ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash
can still locate and access the multicast group after its refcount is
decremented. If the RCU callback runs and frees the group while a reader is
accessing it, a use-after-free occurs.
Fix this by unlinking the multicast group from mc_hash using
ip_mc_hash_remove() before scheduling it for reclamation.
BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0
Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276
Call Trace:
<IRQ>
dump_stack_lvl+0x67/0x90
print_report+0x175/0x7c0
kasan_report+0x147/0x180
ip_check_mc_rcu+0x149/0x3f0
udp_v4_early_demux+0x36d/0x12d0
ip_rcv_finish_core+0xb8b/0x1390
ip_rcv_finish+0x54/0x120
NF_HOOK+0x213/0x2b0
__netif_receive_skb+0x126/0x340
process_backlog+0x4f2/0xf00
__napi_poll+0x92/0x2c0
net_rx_action+0x583/0xc60
handle_softirqs+0x236/0x7f0
do_softirq+0x57/0x80
</IRQ>
Allocated by task 2239:
kasan_save_track+0x3e/0x80
__kasan_kmalloc+0x72/0x90
____ip_mc_inc_group+0x31a/0xa40
__ip_mc_join_group+0x334/0x3f0
do_ip_setsockopt+0x16fa/0x2010
ip_setsockopt+0x3f/0x90
do_sock_setsockopt+0x1ad/0x300
Freed by task 0:
kasan_save_track+0x3e/0x80
kasan_save_free_info+0x40/0x50
__kasan_slab_free+0x3a/0x60
__rcu_free_sheaf_prepare+0xd4/0x220
rcu_free_sheaf+0x36/0x190
rcu_core+0x8d9/0x12f0
handle_softirqs+0x236/0x7f0 |
| In the Linux kernel, the following vulnerability has been resolved:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize UMP output teardown with event_input
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, skmsg: fix verdict sk_data_ready racing with ktls rx
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
hci_le_create_cis_sync() dereferences conn->conn_timeout after releasing
both rcu_read_lock() and hci_dev_lock(hdev). The conn pointer was
obtained from an RCU-protected iteration over hdev->conn_hash.list and
is not valid once these locks are dropped. A concurrent disconnect can
free the hci_conn between the unlock and the dereference, causing a
use-after-free read.
The cancellation mechanism in hci_conn_del() cannot prevent this because
hci_le_create_cis_pending() queues hci_create_cis_sync with data=NULL:
hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
While hci_conn_del() dequeues with data=conn:
hci_cmd_sync_dequeue(hdev, NULL, conn, NULL);
Since NULL != conn, the lookup in _hci_cmd_sync_lookup_entry() never
matches, and the pending work item is not cancelled.
Fix this by saving conn->conn_timeout into a local variable while the
locks are still held, so the stale conn pointer is never dereferenced
after unlock.
This is the same class of bug as the one fixed by commit 035c25007c9e
("Bluetooth: hci_sync: Fix UAF on le_read_features_complete") which
addressed the identical pattern in a different function.
This vulnerability was identified using 0sec.ai, an open-source
automated security auditing platform (https://github.com/0sec-labs). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Free reuseport cBPF prog after RCU grace period.
Eulgyu Kim reported the splat below with a repro. [0]
The repro sets up a UDP reuseport group with a cBPF prog and
replaces it with a new one while another thread is sending
a UDP packet to the group.
The reuseport prog is freed by sk_reuseport_prog_free().
bpf_prog_put() is called for "e"BPF prog to destruct through
multiple stages while cBPF prog is freed immediately by
bpf_release_orig_filter() and bpf_prog_free().
If a reuseport prog is detached from the setsockopt() path
(reuseport_attach_prog() or reuseport_detach_prog()),
sk_reuseport_prog_free() is called without waiting for RCU
readers to complete, resulting in various bugs.
Let's defer freeing the reuseport cBPF prog after one RCU
grace period.
Note "e"BPF prog is safe as is unless the fast path starts
to touch fields destroyed in bpf_prog_put_deferred() and
__bpf_prog_put_noref().
[0]:
BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
Read of size 4 at addr ffffc9000051e004 by task slowme/10208
CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596
udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495
__udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723
__udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752
__udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6181 [inline]
__netif_receive_skb net/core/dev.c:6294 [inline]
process_backlog+0xaa4/0x1960 net/core/dev.c:6645
__napi_poll+0xae/0x340 net/core/dev.c:7709
napi_poll net/core/dev.c:7772 [inline]
net_rx_action+0x5d7/0xf50 net/core/dev.c:7929
handle_softirqs+0x22b/0x870 kernel/softirq.c:622
do_softirq+0x76/0xd0 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890
neigh_output include/net/neighbour.h:556 [inline]
ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip_output+0x29f/0x450 net/ipv4/ip_output.c:438
ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508
udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195
udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
__sys_sendto+0x554/0x680 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x415a2d
Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d
RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003
RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010
R10: 0000000000000000 R11:
---truncated--- |
