| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Site isolation issue in the Networking component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5. |
| Mitigation bypass in the File Handling component. This vulnerability was fixed in Firefox ESR 153.5 and Thunderbird 153.5. |
| SCM_RIGHTS file descriptor passing did not preserve FD_RESOLVE_BENEATH when a descriptor was transferred. A process could clear the restriction by sending the descriptor to itself over a Unix domain socket.
A process in a jail that has received a directory file descriptor from another jail can use these techniques to escape the jail's filesystem root restriction. |
| When fdescfs(4) was mounted in a jail with the "nodup" option, opening /dev/fd/N returned a descriptor that did not inherit FD_RESOLVE_BENEATH or the Capsicum capability rights of descriptor N.
A process in a jail that has received a directory file descriptor from another jail can use these techniques to escape the jail's filesystem root restriction. |
| renameat(2) did not enforce FD_RESOLVE_BENEATH on its directory arguments. A jailed process could rename a directory relative to a restricted descriptor, then escape the jail root via fchdir(2). This requires the directory to reside on a filesystem that is also reachable from the jail's root.
A process in a jail that has received a directory file descriptor from another jail can use these techniques to escape the jail's filesystem root restriction. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.54.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink
vti6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink
ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: mask server-provided mode to 07777 in modefromsid
When modefromsid is active, parse_dacl() applies the server-provided
sub_auth[2] value from the NFS mode SID to cf_mode without masking to
07777. Apply the correct masking, same as in the read path. |
| Hyland Desktop Host for Windows before 25.1.1 is vulnerable to local privilege escalation. This is caused by a privileged service running from the %PROGRAMDATA%\Hyland\DesktopHost\bin folder with weak permissions. A local user can exploit this to escalate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
KUAP means kernel cannot touch user memory unless it explicitly is
enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning
to userspace just before RFI, kernel should restore the user AMR value
back.
Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare()
as the last architecture step before returning to userspace.
commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
therefore called kuap_user_restore() from that hook. But on PowerPC that
is too early. After irqentry_exit() / syscall_exit_to_user_mode() we
still run platform specific exit routines.
e.g. code snippets showing both exception handling and system call
handling as the callers of function arch_exit_to_user_mode_prepare()
which does kuap_user_restore(). The below path shows that calling
kuap_user_restore() is too early when called from
arch_exit_to_user_mode_prepare().
Exception handling in exceptions-64s.S
=======================================
bl CFUNC(do_page_fault)
..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault)
arch_interrupt_async_enter_prepare(regs);
state = irqentry_enter(regs);
instrumentation_begin();
irq_enter_rcu();
handler(regs);
nap_adjust_return(regs);
irq_exit_rcu();
instrumentation_end();
arch_interrupt_async_exit_prepare(regs);
irqentry_exit(regs, state); <<< too early
irqentry_exit_to_user_mode()
__exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ);
arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early
b interrupt_return_srr
.. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore
prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So
only when that routine is fully finished is when the user KUAP should be
fully restored which interrupt_exit_user_prepare() already takes care of
before returning.
Similarly for system call handling in interrupt_64.S
======================================================
bl CFUNC(system_call_exception)
.Lsyscall_exit:
addi r4,r1,STACK_INT_FRAME_REGS
li r5,0 /* !scv */
bl CFUNC(syscall_exit_prepare)
.. kuap_assert_locked();
syscall_exit_to_user_mode(regs); <<< too early
syscall_exit_to_user_mode_prepare(regs); <<< too early
kuap_user_restore(regs); <<< already calls
syscall_exit_prepare(), which can enable IRQs, replay a pending
interrupt, and only then rfi. Those functions already restore KUAP
immediately before rfi.
Note that if we restore the user AMR too early like in the current code
as shown from the code snippets above, then we get the following warning
when CONFIG_PPC_KUAP_DEBUG is enabled:
WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected)
TRAP: 0700
LR: c00000000000d8d4 CTR: c0000000021fe500
MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000
interrupt_exit_user_prepare+0x1a0/0x1c0
interrupt_return_srr_user+0x8/0x12c |
| Incorrect default permission in Samsung Flow prior to version 4.9.22.4 allows local attackers to launch an arbitrary activity with Samsung Flow privileges on the connected device. |
| Improper input validation in CreditCardRetrieveActivity of Samsung Checkout prior to version 5.1.03.1 allows local attackers to launch an arbitrary activity with Samsung Checkout privileges. |
| obsidian-tc is a governed, agent-ready Model Context Protocol server for Obsidian vaults. Prior to 1.3.1, undefined readPaths and writePaths settings allow all paths, strictReadDefault does not protect direct requests, and the .obsidian, .git, and .trash control directories are excluded only during enumeration. An authenticated caller can directly read sensitive files such as .obsidian/plugins/*/data.json, potentially exposing plugin API keys, Obsidian Sync passwords, and other in-vault data. Version 1.3.1 fixes the vulnerability by denying the control directories by default and enforcing strictReadDefault on direct request paths. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction. |
| Incorrect default permissions in Windows Server Update Service allows an authorized attacker to elevate privileges locally. |
| When curl < 7.84.0 saves cookies, alt-svc and hsts data to local files, it makes the operation atomic by finalizing the operation with a rename from a temporary name to the final target file name.In that rename operation, it might accidentally *widen* the permissions for the target file, leaving the updated file accessible to more users than intended. |
| Vulnerability due to incorrect permissions in TSplus Remote Access shared login scripts. The autostart1.tscr files, located in the shared themes directory, allow users without sufficient privileges to write to them. A local attacker with a valid session on the terminal or remote desktop server could modify these files to execute arbitrary commands within another user’s security context when that user logs in using the same theme or operating mode. Depending on the affected user’s privileges, exploitation could allow lateral movement between users or privilege escalation. |
| sshd in OpenSSH 6.2 through 8.x before 8.8, when certain non-default configurations are used, allows privilege escalation because supplemental groups are not initialized as expected. Helper programs for AuthorizedKeysCommand and AuthorizedPrincipalsCommand may run with privileges associated with group memberships of the sshd process, if the configuration specifies running the command as a different user. |
