| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An external control of system or configuration setting vulnerability has been reported to affect QuRouter. If a local attacker gains an administrator account, they can then exploit the vulnerability to modify data on the system.
We have already fixed the vulnerability in the following version:
QuRouter 2.7.2.113 and later |
| Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in hexpm hex allows a malicious package publisher or a hostile repository server to inject terminal control sequences into the output of Mix tasks.
Hex prints strings supplied by the package repository and the documentation search service straight to the terminal through Hex.Shell.info/1 and Hex.Shell.error/1, neutralizing no control characters. Affected sinks span package metadata and configuration snippets in mix hex.info, search results in mix hex.package search and mix hex.search, owner and organization listings, publish and sponsor URLs, the authenticated username in mix hex.user, policy identities in mix hex.policy, and API error bodies rendered by Hex.Utils.print_error_result/1. A malicious package can embed ANSI escape sequences (cursor movement, line erase, carriage returns, OSC 52 clipboard writes) or Unicode bidirectional overrides in any of those fields, so the bytes reach the terminal unchanged, forging displayed URLs, package descriptions and suggested commands, concealing real output, or writing to the clipboard. No authentication or privileged position is required; only publishing a package.
This issue affects hex: from 0.0.1 before 2.5.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: keep RBUF EEE/PM disabled
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working. |
| Improper access control in Windows Update Stack allows an authorized attacker to perform tampering locally. |
| OpenVPN 2.7_alpha1 through 2.7.7 allows remote authenticated users to impersonate others via a crafted certificate subject field |
| OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. Prior to 2.4.20, the cupsdCreateJob option-string builder in scheduler/job.c maps attacker-controlled destination-uri and pre-dial-string values from a configured fax queue to the phone and faxPrefix options. Unlike ordinary IPP job attributes, these mapped fax values bypass the control-character sanitizer and are copied directly into the filter options argument. A user permitted to submit a job can therefore inject control characters into the downstream option stream. The reporter states that a downstream fax filter passing these values to a shell or modem command could execute code as lp, while the maintainer states that CUPS has no confidentiality or integrity impact because the only known code-executing filter is optional Foomatic and addressed separately, leaving possible disruption of the affected queue. This issue is fixed in version 2.4.20. |
| OpenAI Codex Desktop for Windows and macOS automatically inspected Git metadata and working-tree status when a user opened a workspace. If the workspace contains a repository with preserved attacker-controlled .git/config, the attr.tree setting and a configured clean or process filter can cause Git to run an attacker-controlled program. The program runs outside Codex's command sandbox with the signed-in user's privileges, without a workspace-trust prompt, command approval, or interaction with a model. The attacker can read, modify, or delete files and access credentials available to that user. Exploitation requires Git to be available on PATH and the user to open the attacker-prepared repository with its local Git configuration intact. An ordinary Git clone does not copy the source repository's .git/config and is not sufficient by itself. |
| In Eclipse Ditto versions 3.6.0 to 3.8.13 and 3.9.0 to 3.9.7, the Ditto Explorer UI loads its complete environment configuration, including the Ditto API URI and the OpenID Connect (OIDC) provider settings, from an arbitrary
cross-origin URL supplied in the environmentsURL query parameter. It adopts this configuration without user confirmation and persists it in the browser's localStorage. A crafted link can therefore set an attacker-controlled OIDC
authority with autoSso enabled. The UI then automatically starts a login at the genuine identity provider but exchanges the returned authorization code together with its PKCE code_verifier at an attacker-controlled token
endpoint. This lets the attacker redeem the code for the victim's access and refresh tokens. Alternatively, an attacker-controlled api_uri causes the UI to send the victim's bearer token or Basic credentials to the attacker. Because
the configuration is persisted, later visits to the UI without the crafted link repeat the token theft. In versions 3.9.0 to 3.9.7, the Swagger UI OIDC integration of the Helm chart and the Docker Compose deployment is affected in
the same way, but requires the user to start the login. The issue is fixed in 3.8.14 and 3.9.8. |
| Renovate before 44.60.1 contains an allowlist bypass vulnerability that allows repository users to evade the allowedHeaders restriction by placing hostRules headers inside shared presets. Attackers can supply internal or externally sourced presets with unvalidated hostRules[].headers to inject custom HTTP headers into requests Renovate sends to other hosts. |
| ssh in OpenSSH before 10.1 allows the '\0' character in an ssh:// URI, potentially leading to code execution when a ProxyCommand is used. |
| ssh in OpenSSH before 10.1 allows control characters in usernames that originate from certain possibly untrusted sources, potentially leading to code execution when a ProxyCommand is used. The untrusted sources are the command line and %-sequence expansion of a configuration file. (A configuration file that provides a complete literal username is not categorized as an untrusted source.) |
| n8n before 1.123.83, 2.x before 2.41.4, and 2.42.x before 2.42.1 contains a code execution vulnerability in the Git node Log operation, which fails to strip a repository's local git configuration before invoking an external program. Authenticated members who can point the node, including as an agent tool, at a repository whose local configuration they control can execute programs as the n8n process user. |
| A privilege escalation vulnerability exists in the internal Command-Line Interface (CLI) authorization handling mechanism of Brocade Fabric OS versions before 9.2.2d and 10.0.0 through 10.0.0a1. An authenticated user or local process that can manipulate the process execution environment can bypass Role-Based Access Control (RBAC) validation checks. Successful exploitation allows an attacker to elevate privileges to root |
| MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, the mariadb.service unit used /run/mysqld/wsrep-new-cluster during the next service restart. A database user with FILE privilege and a secure-file-priv configuration permitting writes to /run/mysqld could create that file and inject attacker-controlled environment values into the restarted service. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2. |
| Aegisub is a cross-platform advanced subtitle editor. From 3.2.0 to 3.4.2, Aegisub automatically loads Automation scripts referenced by `Automation Scripts` metadata in `ASS` subtitle projects without asking whether the user trusts the scripts or their authors. An attacker can distribute a crafted `ASS` file together with a referenced malicious Automation script, and opening the `AS` file executes arbitrary code with the privileges of the Aegisub process. From 3.4.0 to 3.4.2, inconsistent handling of embedded `NUL` characters between extension validation and filesystem operations additionally allows a crafted `ASS/Lua` polyglot to reference and execute itself as a single-file variant. The vulnerability is fixed in Aegisub 3.5.0. |
| External control of system or configuration setting in Microsoft PowerToys allows an authorized attacker to elevate privileges locally. |
| External control of system or configuration setting in Windows Setup Files Cleanup allows an authorized attacker to elevate privileges locally. |
| Podman is a tool for managing OCI containers and pods. From 4.4.0 until 5.8.8 and 6.1.3, podman run treats an image carrying the io.podman.annotations.checkpoint.runtime.name annotation as a checkpoint and silently ignores user-supplied container creation restrictions such as --cap-drop=ALL, allowing image-controlled checkpoint state to select weaker sandbox settings and capabilities. Rootless containers are not affected because checkpoint and restore are unavailable in that mode. This issue is fixed in versions 5.8.8 and 6.1.3. |
| FreePBX is an open source IP PBX. Prior to 16.0.47 and 17.0.30, the FreePBX Framework module permits a crafted backup to restore the hidden AUTHTYPE setting with the value none through runRestore() in amp_conf/htdocs/admin/libraries/Builtin/Restore.php. An authenticated user with sufficient backup-restore access or write access to backup files can thereby disable FreePBX authentication during restoration, bypassing the user-interface removal of AUTHTYPE=none. This issue is fixed in versions 16.0.47 and 17.0.30. |
| Improper Neutralization of Null Byte or NUL Character vulnerability in the EventLogAppender of Apache log4net.
A NUL character in logged content ended the Windows Event Log record at that point, so everything the layout rendered after it, including exception text and trailing fields, was silently not stored. A party whose data reaches a log message could hide the rest of that record. Only applications on Windows that use EventLogAppender are affected.
This issue affects Apache log4net: from 1.2.9 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
