| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| phpMyFAQ from 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in GroupController::deleteGroup() that omits privilege-level checks on target groups. Authenticated non-SuperAdmin administrators holding GROUP_DELETE can send a crafted groupId to /admin/api/group/delete to permanently destroy higher-privileged groups and strip members' inherited rights. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Block VFs from clobbering special CGX PKIND state
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND. |
| Insufficient granularity of access control in Windows Server Update Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink
vti_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate vti_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Open-code GGTT MMIO access protection
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
(cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) |
| P4 Search (formerly Helix Search) returns stored credentials in cleartext through its configuration API to users with administrative privileges on the connected P4 Server, allowing privilege escalation.
This affects 2026.4.2 and earlier and is fixed in 2026.4.3. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.11 before 19.2.8, 19.3 before 19.3.5, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an authenticated user with a project-scoped fine-grained Personal Access Token to permanently delete or modify group-level labels, due to incorrect authorization logic on label ownership scope validation. |
| Gitea's web attachment handler skips its cross-repository ownership check for attachments created before 16 January 2026 and checks permissions against the repository named in the request URL instead. An unauthenticated attacker who knows a private attachment's UUID can request it through a public repository's attachment path and retrieve its contents. This can expose issue and pull request attachments or release assets; the random attachment UUID must already be known to the attacker. |
| Insufficient granularity of access control in Windows Mobile Device Management allows an authorized attacker to perform tampering locally. |
| Insufficient granularity of access control in Windows Server Update Service allows an authorized attacker to elevate privileges locally. |
| Insufficient granularity of access control in Windows StateRepository API allows an authorized attacker to elevate privileges locally. |
| A user with query access to an Azure Monitor data source can use its resource proxy to call Azure Resource Manager APIs beyond those Grafana needs, with the data source's Azure identity (unintended proxy). The impact is bounded by the Azure role granted to that identity. |
| Mitigation bypass in the Enterprise Policies component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Check BAR resources before exporting a DMABUF
A DMABUF exports access to BAR resources and, although they are
requested at startup time, we need to ensure they really were reserved
before exporting. Otherwise, it's possible to access unreserved
resources through the export.
Add a check to the DMABUF-creation path. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation
Whiteout objects are used in the upper layer of an OverlayFS to
indicate that the file with this name does not exist in the unified
view, even if it is present in one of the lower layer file systems.
For the userspace implementations of OverlayFS (fuse-overlayfs),
whiteout objects can be created from userspace as well:
* mknod(2) with S_IFCHR and makedev(0, 0)
* renameat2(2) with RENAME_WHITEOUT,
creating the whiteout in the old place of the moved file.
This commit guards whiteout creation in both of these cases with
LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered
character devices and are not bound to a driver.
LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a
whiteout object: creating one is the only S_IFCHR creation that the VFS
exempts from CAP_MKNOD, so it is as unprivileged as creating a regular
file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and
LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that
expose a kernel interface [1].
For the mknod(2) case, introduce a Landlock erratum. The creation of
whiteout objects through mknod(2) was previously guarded using
LANDLOCK_ACCESS_FS_MAKE_CHAR, and it is now guarded using
LANDLOCK_ACCESS_FS_MAKE_REG.
For the renameat2(2) case, fix a bug: Before this commit, renameat2(2)
with RENAME_WHITEOUT would create a directory entry even when all
LANDLOCK_ACCESS_FS_MAKE_* rights were denied.
This does not affect normal renames within layered OverlayFS mounts:
When doing a regular rename() on a mounted fuse-overlayfs, it is the
fuse-overlayfs daemon that exercises renameat2() with RENAME_WHITEOUT,
and only the Landlock domain of that daemon is checked there.
Depends-on: 49c9e09d9610 ("landlock: Fix handling of disconnected directories")
Depends-on: fe72ce6710cb ("landlock: Add errata documentation section")
[mic: Record why LANDLOCK_ACCESS_FS_MAKE_REG is the matching right, and
add link(2) to the user doc] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations. |
| Perses is an open-source dashboard and visualization project for observability data. From 0.43.0 until 0.54.0-rc.0, the datasource creation and unsaved datasource proxy paths authorize the caller on a Datasource or GlobalDatasource scope but do not require read permission for the separately grantable associated project or global Secret before resolving it. A low-privilege user with GlobalDatasource:create or corresponding project datasource creation rights can attach a project or global Secret that the user cannot otherwise read, point the datasource at a service controlled by the user, and cause Perses to send the decrypted secret in plaintext, bypassing project and global scope separation. This issue is fixed in version 0.54.0-rc.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, The stream open handler calls only check_vhost_access; it omits the node/vhost/user connection-limit checks that rabbit_reader performs for AMQP. A developer %% FIXME comment at the cited line explicitly acknowledges the gap. No compensating enforcement exists in connection tracking or elsewhere in rabbitmq_stream. An authenticated tenant can fully bypass operator-configured per-user and per-vhost connection caps by connecting via port 5552 instead of 5672. Preconditions include rabbitmq_stream plugin enabled Authenticated stream-protocol credentials Operator relies on per-user/per-vhost connection limits for tenant isolation. This issue is fixed in versions 4.2.7 and 4.3.1. |
| vm2 through 3.11.6 contains a builtin-module denylist bypass in NodeVM. When the embedder uses the builtin wildcard together with negative entries (e.g. require: { builtin: ['*', '-fs', '-child_process'] }), negative entries are matched by exact module name in lib/builtin.js, so -fs removes only the builtin named fs and does not remove builtin subpaths such as fs/promises. Sandboxed code can therefore call require('fs/promises') or require('node:fs/promises') and reach the promise-based filesystem API despite fs being denied; node: prefix handling is likewise inconsistent (a -node:fs/promises entry does not block require('fs/promises')). Host file creation and writing were confirmed via fsp.writeFile(), and other fs/promises operations (cp, mkdir, rename, rm, rmdir, truncate, read operations, etc.) are also reachable. This issue is fixed in vm2 3.11.7. |
