| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitrary physical memory, a local
privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH
and the cache-enable bits are exposed the same way. The ptrace GPR regset
already refuses any change to SR for exactly this reason.
Restore only the arithmetic flag bits (F, CY, OV) from the signal frame
and take every privileged control bit from the SR the kernel saved on
signal entry.
Verified with qemu-system-or1k -M or1k-sim: before this change an
unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to
physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the
same PoC receives SIGSEGV and physical memory is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(),
but leave needed_headroom and needed_tailroom set to 0.
When the underlying phy_dev (or stacked lower device) requires extra headroom
or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or
veth with rx headroom), upper layers calculating packet headroom and tailroom
fail to reserve sufficient space.
This can result in reallocation overhead, skb headroom underflows, or KASAN
slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header()
prepends header data or when lower devices append tailroom.
Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans
in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: lib: Fix ZBB strnlen reading past count boundary
The ZBB-optimized strnlen loop loads one word ahead before checking the
aligned boundary:
REG_L t1, SZREG(t0) // load next word
addi t0, t0, SZREG // advance
orc.b t1, t1
bgeu t0, t4, 4f // boundary check AFTER load
where t4 = (s + count) & -SZREG. When s is aligned and count is a
multiple of SZREG, t4 equals s + count and the loop loads a full word
starting at exactly s + count. If s + count falls on a page boundary
with the next page unmapped, this faults.
Fix by computing the aligned boundary from the last valid byte
(s + count - 1) instead of s + count. This makes the loop stop at the
word containing the last valid byte rather than potentially loading the
word after it. The count == 0 case is already handled by the beqz
early exit.
Also add a pre-loop guard (bgeu t0, t4) for the case where all valid
bytes fit within the first word. With the adjusted boundary, t4 can
equal t0, and entering the loop with stale register state from the
first-word processing would produce incorrect results.
The final minu clamp ensures the result is still correct when the last
loaded word extends past s + count - 1 within the same aligned word. |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Sampler is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by an Integer Overflow or Wraparound vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| darknet subscripts its layer array with an index taken from a configuration file without checking it against the array's length. The array is allocated in src-lib/darknet_network.cpp as xcalloc(net.n, sizeof(Darknet::Layer)), sized to exactly the number of layer sections the file declares. The shortcut, scale_channels and sam sections supply that index through their from field and the route section through its layers field, and parse_shortcut_section in src-lib/darknet_cfg.cpp reads net.layers[index].outputs with no bounds check, which reads past the allocation. The dispatch loop in create_network then reuses the same index to assign net.layers[l.index].use_bin_output and net.layers[l.index].keep_delta_gpu, writing past the allocation at an offset the file controls, with a fixed one-byte value. Parsing a crafted configuration file is sufficient: the parse runs before any weights file is opened and needs no non-default option, so the result is a reliable crash and a write whose location, though not its value, is chosen by whoever supplied the file. |
| The Grav Email plugin (getgrav/grav-plugin-email) before 4.2.2 renders page-editor-controlled Email action parameters as unsandboxed Twig templates. An authenticated remote user with only api.access and api.pages.write permissions can place a Twig expression in header.form.process.email.body, publish the page, and submit the form to execute an arbitrary operating-system command as the account running PHP. |
| An out-of-bounds read was found in the DHCPv4 packet capture code of wicked. ni_capture_inspect_udp_header() in src/capture.c reports the IP total length as the payload length instead of the length of the remaining UDP payload. Consequently, the DHCP option walker in the DHCPv4 client (wickedd-dhcp4) reads up to ihl + 8 bytes — at most 68 bytes — past the end of the 1500-byte packet receive buffer. An unauthenticated attacker on the same network who sends a crafted DHCP/UDP packet can make the client parse adjacent heap memory as DHCP options, so that heap contents such as allocator metadata or pointer values can be interpreted into lease fields. The over-read is bounded to 68 bytes; no memory write, no attacker control over the adjacent bytes and no remote exfiltration primitive has been demonstrated. This issue affects wicked up to and including version 0.6.80. |
| An integer underflow was found in the DHCPv4 packet capture code of wicked. ni_capture_inspect_udp_header() in src/capture.c does not verify that the IP total length field (ip_len) is at least as large as the IP header length (ihl) before subtracting the header length. An unauthenticated attacker on the same network can thereby trigger an out-of-bounds read past the receive buffer in the wicked DHCPv4 client (wickedd-dhcp4), which can crash the daemon depending on the process memory layout. No information disclosure has been demonstrated. This issue affects wicked up to and including version 0.6.80. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to pass invalid log2 page size when allocating physical pages leading to OOB read and/or write due to improper validation of the said value.
Such crafted log2 page size could lead to 4K pages being treated as higher order pages and allowing read and/or write access to the memory beyond 4K threshold. |
| Heap-based buffer overflow in the multipart form-data parser in `jst_post.c` in RDK-B WebUI `rdkb-2025q4-kirkstone.04.10.26` allows a remote unauthenticated attacker to cause memory corruption and denial of service, and potentially execute arbitrary code, via a crafted multipart/form-data request. |
| A weakness has been identified in primefaces primereact up to 10.9.8. This issue affects the function ObjectUtils.mutateFieldData of the file components/lib/utils/ObjectUtils.js of the component API. This manipulation of the argument Field causes improperly controlled modification of object prototype attributes. The attack is possible to be carried out remotely. Upgrading to version 10.9.9 and 11.0.0 is capable of addressing this issue. Patch name: 61f182e11d9ef52032ff56f420da763a6938236f. It is recommended to upgrade the affected component. |
| Out of bounds read in Tint in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
