| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Return NULL on error in active_instance
Avoid returning &node->base when node is NULL due to OOM
during GFP_ATOMIC allocation.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit 6029bc064f0b1bac184203a50fbaaf070fa18832) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Fix NULL deref in I915_CONTEXT_PARAM_SSEU
Setting context engine slot N into I915_ENGINE_CLASS_INVALID /
I915_ENGINE_CLASS_INVALID_NONE and attempting to apply
I915_CONTEXT_PARAM_SSEU to the same slot N will deref NULL.
Fix that.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
(cherry picked from commit 36eda5b5c2d40da41cc0a5403c26986237cf9e87) |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: add ioremap return check and cleanup
Add a check for the return value of pci_ioremap_bar()
in cx23885_dev_setup().
If ioremap for BAR0 fails, release the already allocated
PCI memory region,
decrement the device count, and return -ENODEV.
This prevents a potential null pointer dereference and
ensures proper cleanup
on memory mapping failure. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper
mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on
bss_desc->bcn_ht_cap being present, but then dereferences a different
pointer, bss_desc->bcn_ht_oper:
if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) &&
bss_desc->bcn_ht_cap &&
ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param))
bcn_ht_cap and bcn_ht_oper are populated independently while parsing the
associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that
advertises an HT Capabilities element but no HT Operation element leaves
bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a
peer while associated to such an AP then dereferences the NULL
bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the
driver NULL-checks it first.
Guard on the pointer that is actually dereferenced.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and
mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus.
mt7615_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on the mt7663 USB and SDIO
buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX
worker. Same defect as the mt7921 and mt7925 patches in this series.
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices"). |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: set have_execfd only once the interpreter is opened
load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O'
(or 'C') flag. This happens well before it opens the interpreter. If
that open fails the flag stays set on the bprm. binfmt_misc is at the
head of the format list so an interpreter open failure that returns
-ENOEXEC lets the search fall through to a later format. This means it
runs the matched binary directly having never staged an interpreter. So
bprm->executable is NULL while have_execfd falsely claims a descriptor
is present.
Consequently, begin_new_exec() dereferences the missing executable:
would_dump(bprm, bprm->executable);
and NULL derefs. Had it not, the hand-off later in the same function
would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL
file with -ENOMEM. Both sites are past the point of no return so the
exec cannot be unwound either way.
This can be reached by unprivileged users as binfmt_misc can be mounted
in user namespaces. So a user can register an 'O' entry whose
interpreter lives on a FUSE mount, have the FUSE server fail the open
with -ENOEXEC and execute a native ELF file that matches the entry.
have_execfd only means anything alongside the executable it describes
which is not set until the interpreter has been opened and staged.
So lets raise it there, next to execfd_creds, which is already set at
that point. An open failure now leaves it clear, so the fallback format
derives credentials from the binary and emits no AT_EXECFD, as it would
for any native exec. The argv rewrite load_misc_binary() performs before
the open is still not undone. This means the binary sees the interpreter
path in argv[0] and its own path in argv[1] but that predates this
change and only became observable once the exec stopped faulting. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: guard missing CRUSH type name lookup
Localized read selection can walk a parent bucket whose name exists in
the CRUSH map while its type has no matching entry in type_names.
get_immediate_parent() then dereferences a NULL type_cn and passes an
invalid pointer into strcmp(), causing a null-ptr-deref.
Skip such malformed parent buckets unless both the bucket name and type
name metadata are present. This keeps malformed hierarchy data from
crashing locality lookup and safely falls back to "not local".
[ idryomov: add WARN_ON_ONCE ] |
| In the Linux kernel, the following vulnerability has been resolved:
net/af_iucv: fix NULL deref in afiucv_hs_callback_syn()
afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC.
If the allocation fails, nsk is NULL.
The connection-refused path is entered when the listen state check
fails, the accept backlog is full, or nsk is NULL. The code
unconditionally calls iucv_sock_kill(nsk) in that path.
iucv_sock_kill() does not accept a NULL socket pointer and immediately
dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL,
calling iucv_sock_kill(nsk) results in a NULL pointer dereference.
Only call iucv_sock_kill() when a child socket was successfully
allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed
attribute table itself instead of calling ip_valid_fib_dump_req(). The
RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is
present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no
RTA_OIF hits a NULL dereference.
RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without
CAP_NET_ADMIN, so an unprivileged user can trigger it.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189)
Call Trace:
mpls_dump_routes (net/mpls/af_mpls.c:2236)
netlink_dump (net/netlink/af_netlink.c:2331)
__netlink_dump_start (net/netlink/af_netlink.c:2446)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7033)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1345)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
__sock_sendmsg (net/socket.c:790)
____sys_sendmsg (net/socket.c:2684)
___sys_sendmsg (net/socket.c:2738)
__sys_sendmsg (net/socket.c:2770)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Skip unset attributes, as ip_valid_fib_dump_req() does. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ndisc: fix NULL deref in accept_untracked_na()
accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev)
and dereferences idev->cnf.accept_untracked_na without a NULL check,
even though its only caller ndisc_recv_na() already fetched and
NULL-checked idev for the same device.
Both reads of dev->ip6_ptr run in the same RCU read-side critical
section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr
between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown()
without the synchronize_net() that orders the unregister path, so the
re-fetch returns NULL and oopses:
BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974)
Read of size 4 at addr 0000000000000364
Call Trace:
<IRQ>
ndisc_recv_na (net/ipv6/ndisc.c:974)
icmpv6_rcv (net/ipv6/icmp.c:1193)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479)
ip6_input_finish (net/ipv6/ip6_input.c:534)
ip6_input (net/ipv6/ip6_input.c:545)
ip6_mc_input (net/ipv6/ip6_input.c:635)
ipv6_rcv (net/ipv6/ip6_input.c:351)
</IRQ>
It is reachable by an unprivileged user via a network namespace.
Pass the caller's already validated idev instead of re-fetching it; the
idev stays alive for the whole RCU critical section, so it is safe even
after dev->ip6_ptr has been cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix maxfield check in DJ short report validation
Commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.
Commit 8b9a097eb2fc ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.
In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:
BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
...
Call Trace:
logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
hid_device_probe+0x329/0x3f0 [hid]
really_probe+0x162/0x570
__device_attach+0x137/0x2c0
bus_probe_device+0x38/0xc0
device_add+0xa56/0xce0
hid_add_device+0x19c/0x280 [hid]
uhid_device_add_worker+0x2c/0xb0 [uhid]
Reject the zero-field report before printing the field report_count. |
| When handling the filename directive in the Content-Disposition header, the filename would be truncated if the filename contained a NULL character. This could have led to reflected file download attacks potentially tricking users to install malware. This vulnerability affects Firefox < 112, Focus for Android < 112, Firefox ESR < 102.10, Firefox for Android < 112, and Thunderbird < 102.10. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.2.0 until 0.144.0, openapi3filter.ValidateRequest can encounter a NULL-pointer-dereference denial of service when an operation declares a content parameter whose application/json media type has no schema. In openapi3filter/req_resp_decoder.go, the default defaultContentParameterDecoder dereferences mt.Schema.Value without checking whether mt.Schema is nil, even though doc.Validate() accepts the document under OpenAPI 3.0.x and 3.1.x. A single unauthenticated request supplying the parameter value can panic request validation, causing an aborted request with log growth in the common synchronous net/http path or a full process crash in integrations without recovery. This issue is fixed in version 0.144.0. |
| HDF5 contains a NULL pointer dereference vulnerability. Processing a crafted HDF5 file containing an attribute with an invalid variable-length datatype type field may cause the application to crash when the attribute is read. |
| A vulnerability was detected in TOTOLINK EX1200L 9.3.5u.6146_B20201023. This affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation results in null pointer dereference. The attack can be launched remotely. The exploit is now public and may be used. |
| A flaw was found in 389 Directory Server. The dereference control plugin does not check for allocation failure before using a BER structure, allowing an unauthenticated remote attacker to crash the LDAP server when the system is under memory pressure. |
| A security vulnerability has been detected in TOTOLINK EX1200L 9.3.5u.6146_B20201023. Affected by this issue is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component Password Configuration Handler. The manipulation leads to null pointer dereference. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
