| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Photoshop Desktop is affected by a Double Free vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix domain reference leak when DPRX read is canceled
tb_tunnel_one_dp() takes a domain reference which is only dropped once
tb_dp_tunnel_active() has run on the work queue. If that work is
cancelled that reference is leaked. Since
commit f5cc545f5969 ("thunderbolt: Wait for tb_domain_release() to
complete when driver is removed") instead of just leaking memory this
now also blocks in the completion wait forever when unbinding the
driver.
This can be triggered whenever a DP tunnel is torn down before the DPRX
read has completed, e.g. by unplugging within the timeout, and then
unbinding the driver.
That reference only exists to keep the domain around while the DPRX work
is scheduled so let the work itself own it: take it in tb_dp_dprx_start()
and drop it in both places that end the work. Get/put are then paired
inside the same file and it doesn't matter anymore if the callback ever
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Make the DP tunnel activation callback mandatory
tb_tunnel_alloc_dp() takes an optional callback which is run from
dprx_work once the DPRX capabilities read has completed. Without that
callback tb_dp_dprx_start() reads the capabilities synchronously and
never queues the work. It however always takes a tunnel reference which
is only dropped by dprx_work itself or by tb_dp_dprx_stop() when
cancel_delayed_work() actually canceled that work. That reference is
thus leaked for every tunnel without a callback.
The only tunnels without one are those from tb_tunnel_discover_dp(),
which are activated again when restoring from hibernation.
Pass the callback to tb_tunnel_discover_dp() as well and drop the
synchronous path such that the DPRX capabilities are always read from
dprx_work. Hibernation restore then also no longer blocks for up to 12
seconds while waiting for that read to complete.
Also fix up the KUnit tests. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Hold a router reference for each allocated HopID
tb_stop() drops the reference to all DP tunnels but does not deactivate
them, thus nothing cancels a dprx_work still in flight (which holds its
own tunnel reference) and the tunnel can outlive tb_switch_remove(). The
HopID releases in tb_path_free() then operate on freed IDAs and trigger
warnings like
ida_free called for id=8 which is not allocated.
This can be triggered by unbinding the driver while a DP tunnel is still
waiting for the DPRX capabilities read to finish. On the Apple NHI
unplugging the cable runs into just that reliably because the read can
never finish right now and because the unplug powers down the entire
USB4 complex and removes the NHI device.
Take a router reference whenever an input or output HopID is allocated
and drop it again after the HopID is released. This keeps the ports and
their HopID IDAs alive for as long as they are used.
The KUnit tests allocate routers without ever registering their devices
so initialize the embedded struct device there as well and drop its
initial reference when the test is finished. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix driver deregistration order
USB serial driver modules register one driver for the USB bus and one or
more drivers for the ports on the USB serial bus.
When unloading a driver module, the USB driver must be deregistered
before the USB serial bus drivers so that I/O is stopped before
unbinding the ports to avoid use-after-free in completion handlers
accessing port data.
Note that the "new_id" attributes must first be removed to prevent new
ids from being added and triggering a probe of the USB driver after it
has been deregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix dynamic id driver deregistration race
Only free the dynamic ids after having deregistered the driver and
removed the "new_id" attribute to avoid leaking any id added by a racing
write to the attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: handle empty FILS association request payload
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix mesh fast xmit path deletion UAF
mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion
flushes the cache and then frees the path with kfree_rcu(), but a
lookup that already holds the path can insert a new cache entry
after the flush. The cache then points at freed memory.
Set MESH_PATH_DELETED before flushing, and skip inserting a cache
entry if the path or MPP path is already deleted. Check this under
the cache walk lock so it is ordered with the flush. Use WRITE_ONCE()
for the deletion flag updates because the cache check reads flags
without taking state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: fix saved termios reset race
Resetting saved termios state on device registration is needed where a
minor number can be reused for an entirely different device and where
the old settings may prevent the port from even being opened (e.g. when
CLOCAL is not set).
Not all TTY drivers guarantee that the minor number is no longer in use
when registering devices however, something which can lead to a
use-after-free when closing a TTY (and saving its termios) races with
re-registration.
Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved
termios state is reset on registration and only set it for drivers that
make sure that the minor number is no longer in use. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: abort break signalling on hangup
The break ioctls can race with hangup and end up calling into a tty
driver for a device that is already gone or powered down.
Drivers must handle this race, but TCSBRK and TCSBRKP should still be
aborted to avoid calling back into the driver after a user-controlled
timeout (possibly even after the tty has been reopened).
Note that drivers should disable any break state on shutdown so just
return on hangup (calling break_ctl() again is racy and will most likely
fail for drivers handling the race). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: tty_port: restore TTY_IO_ERROR on activation failure
Make sure to restore the TTY_IO_ERROR flag if activation fails to
prevent I/O attempts on a port that is gone or powered down.
This specifically avoids issues like kernel panic due to unclocked
accesses or NULL-pointer dereferences when accessing powered down or
deregistered ports when a TTY ioctl races with hangup and open.
Note that the flag is set again in tty_port_close() but not restoring it
on activation failure leaves a window where drivers fail to handle the
ioctl-hangup race. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup
vcc_cleanup() sets port->tty to NULL without holding port->lock, racing
with vcc_event() LDC callbacks that read port->tty under port->lock and
then use tty->port. This can cause a use-after-free when the callback
dereferences tty->port after cleanup has already destroyed and freed it. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: fix use-after-free in cdns3_gadget_exit()
cdns3_gadget_start() arms two works on system_freezable_wq:
pending_status_wq for the deferred ep0 status stage and aligned_buf_wq
for realigned request buffers. Both handlers use the cdns3_device the
works are embedded in, and cdns3_pending_setup_status_handler() also
calls the ep0 request completion.
cdns3_gadget_exit() does not wait for these works. It frees all
endpoints and aligned buffers and drops the last reference to the
gadget device, which frees priv_dev, so a work queued before the exit
can run after the free.
Fix this by waiting for both works after the gadget driver is unbound
and the IRQ is freed, when no new work can be queued, and before the
endpoints and buffers are released.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in tps6598x_connect()
tps6598x_connect() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: clear both ep_in and ep_out for non-ep0 control endpoints
In usb_enable_endpoint(), non-zero control endpoints (where
usb_endpoint_xfer_control(&ep->desc) is true) populate both
dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct
usb_host_endpoint pointer.
However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or
dev->ep_in[epnum] depending on the direction bit of epaddr when
reset_hardware is set, leaving the opposite direction's array slot
pointing to the disabled/freed endpoint.
Clear both dev->ep_out[epnum] and dev->ep_in[epnum] when disabling a
non-ep0 control endpoint with reset_hardware set, and update the
function kerneldoc accordingly.
Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget to
enumerate a USB device with a non-zero control endpoint
(bEndpointAddress 0x01, bmAttributes USB_ENDPOINT_XFER_CONTROL),
verifying that both dev->ep_in[1] and dev->ep_out[1] are cleared when
the interface is disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: fix IRQ storm on invalid event buffer count
When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the
event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check
that event count does not exceed event buffer length") returns IRQ_NONE
without writing back GEVNTCOUNT. Since the DWC3 interrupt is
level-triggered, the uncleared IRQ source keeps the line asserted,
causing a tight IRQ storm that accumulates 99,900 unhandled interrupts
and triggers spurious.c:184 BUG -> kernel panic.
The resulting call stack:
__report_bad_irq+0xac/0xc8
note_interrupt+0x340/0x468
handle_irq_event+0xac/0xc0
handle_fasteoi_irq+0x120/0x228
gic_handle_irq+0x68/0x108
...
kernel BUG at kernel/irq/spurious.c:184
To reproduce, write a bogus value exceeding the event buffer length
directly to the GEVNTCOUNT register:
devmem <DWC3_BASE + 0xc40c> 4 0x1004
Write the bogus count back to GEVNTCOUNT to clear the IRQ source,
consistent with the stale event clearing pattern in
dwc3_event_buffers_setup(), and schedule error recovery to
reinitialize the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: sierra_ms: reject short SWoC info transfers
sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes
from the device via usb_control_msg(), but its callers only treat a
negative return value as failure. A device that answers the
vendor-specific GetSwocInfo request with a short IN transfer is
therefore accepted, leaving the tail of the freshly allocated
(kmalloc(), non-zeroing) swoc_info buffer uninitialized.
truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU
and swocInfo->LinuxVer from that buffer into the world-readable
(0444) "truinst" sysfs attribute. An emulated/malicious USB device
(VID 0x1199, PID 0x0fff) can exploit this to disclose up to 5 bytes
of stale kernel heap memory (kmalloc-64) to unprivileged userspace,
once per sysfs read, indefinitely. On kernels built without
init_on_alloc this leaks recently freed heap contents.
Only accept the transfer when the full structure was received.
sierra_ms_init() already retries failed queries, so well-behaved
devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix leaked fd fixups on TF_UPDATE_TXN supersede
When a TF_UPDATE_TXN transaction supersedes a pending async transaction
in a frozen process, the outdated transaction is freed with kfree()
directly. This skips binder_free_txn_fixups(), leaking all
binder_txn_fd_fixup entries and their fget()'d struct file references.
The leaked file refcounts never reach zero, so the struct file objects
are permanently pinned in memory. They survive process exit and
accumulate across invocations until file-max exhaustion.
Every other transaction cleanup path (binder_free_transaction(),
binder_transaction() error paths, binder_release_work()) correctly
calls binder_free_txn_fixups(). Add the missing call before kfree()
in the t_outdated cleanup block. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix is_failure flag for superseded transaction cleanup
When a TF_UPDATE_TXN transaction supersedes a pending async transaction,
binder_release_entire_buffer() is called with is_failure=false. Since the
superseded transaction was never delivered, binder_apply_fd_fixups() was
never called and no fds were installed in the target process.
With is_failure=false, the BINDER_TYPE_FDA cleanup handler interprets
stale buffer contents as installed fd numbers and passes them to
binder_deferred_fd_close(), closing unrelated file descriptors.
Pass is_failure=true since the transaction was never delivered to the
target, matching the semantics of all other undelivered-transaction
cleanup paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
(cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924) |
