| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vim is a UNIX editor that, prior to version 9.0.2121, has a heap-use-after-free vulnerability. When executing a `:s` command for the very first time and using a sub-replace-special atom inside the substitution part, it is possible that the recursive `:s` call causes free-ing of memory which may later then be accessed by the initial `:s` command. The user must intentionally execute the payload and the whole process is a bit tricky to do since it seems to work only reliably for the very first :s command. It may also cause a crash of Vim. Version 9.0.2121 contains a fix for this issue. |
| Vim is an open source command line text editor. When closing a window, vim may try to access already freed window structure. Exploitation beyond crashing the application has not been shown to be viable. This issue has been addressed in commit `25aabc2b` which has been included in release version 9.0.2106. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Use After Free in GitHub repository vim/vim prior to 9.0.1857. |
| Use After Free in GitHub repository vim/vim prior to 9.0.1840. |
| Vim is an improved version of the good old UNIX editor Vi. Heap-use-after-free in memory allocated in the function `ga_grow_inner` in in the file `src/alloc.c` at line 748, which is freed in the file `src/ex_docmd.c` in the function `do_cmdline` at line 1010 and then used again in `src/cmdhist.c` at line 759. When using the `:history` command, it's possible that the provided argument overflows the accepted value. Causing an Integer Overflow and potentially later an use-after-free. This vulnerability has been patched in version 9.0.2068. |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a heap use-after-free in the meta coder: when memory allocation fails, a single byte is written to a stale pointer. Remote attackers can trigger it by processing specially crafted image files, causing a denial of service. |
| A use-after-free vulnerability was found in FFmpeg's RASC video decoder. The decode_move() function initializes a read pointer into a decompressed buffer, but a subsequent reallocation of that same buffer during move-table processing leaves the pointer dangling. An attacker could exploit this by providing a specially crafted AVI file containing a malicious RASC video stream. When a user opens or plays the file, the decoder reads from freed heap memory, which could lead to a denial of service (crash). |
| libexpat before 2.8.2 does not consider XML_TOK_DATA_CHARS in doCdataSection and thus lacks handler call depth tracking for various calls from within handlers in cases of a policy violation. Thus, a use-after-free can occur. NOTE: this issue exists because of an incomplete fix for CVE-2026-50219. |
| Use After Free in libxml2's xmlParseInternalSubset from GNOME libxml2 version 2.9.11 to 2.11.0 allows a remote attacker to cause a denial-of-service via maliciously crafted XML input with improper entity resolution handling. |
| Cloudflare Quiche was affected by 2 use-after-free vulnerabilities in the connection ID iterator FFI functions.
The “quiche_connection_id_iter_next” and “quiche_conn_retired_scid_next” functions would return a pointer to a “ConnectionId” to the applications via function arguments, but the owned “ConnectionId” would be dropped at the end of those functions' scope.
Only applications using those FFI functions are affected. The FFI API is disabled by default by a build-time feature flag.
Impact
If unpatched, an application calling the affected FFI functions will dereference freed memory. The most likely outcome is undefined behavior leading to a process crash (denial of service). Depending on allocator state, the read may also return adjacent heap contents, resulting in limited information disclosure or incorrect connection identifier handling.
Mitigation
Users are requested to upgrade to quiche 0.29.2 which is the earliest version containing the fix for this issue. |
| libexpat before 2.8.2 lacks handler call depth tracking for calls to XML_ResumeParser from within handlers in cases of a policy violation. Thus, a use-after-free can occur (similar to the CVE-2026-50219 situation). |
| Use after free in Core in Google Chrome on Windows prior to 149.0.7827.115 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
lib: test_hmm: evict device pages on file close to avoid use-after-free
Patch series "Minor hmm_test fixes and cleanups".
Two bugfixes a cleanup for the HMM kernel selftests. These were mostly
reported by Zenghui Yu with special thanks to Lorenzo for analysing and
pointing out the problems.
This patch (of 3):
When dmirror_fops_release() is called it frees the dmirror struct but
doesn't migrate device private pages back to system memory first. This
leaves those pages with a dangling zone_device_data pointer to the freed
dmirror.
If a subsequent fault occurs on those pages (eg. during coredump) the
dmirror_devmem_fault() callback dereferences the stale pointer causing a
kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64,
where a test failure triggered SIGABRT and the resulting coredump walked
the VMAs faulting in the stale device private pages.
Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in
dmirror_fops_release() to migrate all device private pages back to system
memory before freeing the dmirror struct. The function is moved earlier
in the file to avoid a forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: remove station if connection prep fails
If connection preparation fails for MLO connections, then the
interface is completely reset to non-MLD. In this case, we must
not keep the station since it's related to the link of the vif
being removed. Delete an existing station. Any "new_sta" is
already being removed, so that doesn't need changes.
This fixes a use-after-free/double-free in debugfs if that's
enabled, because a vif going from MLD (and to MLD, but that's
not relevant here) recreates its entire debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup()
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix use-after-free on unbind
The SPI subsystem frees the controller and any subsystem allocated
driver data as part of deregistration (unless the allocation is device
managed).
Take another reference before deregistering the controller so that the
driver data is not freed until the driver is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration. |
