| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: fix tunnel and session refcount leak on seq_file release
In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state
(pd->tunnel and pd->session) is kept in seq_file private data to allow
iteration across multiple read() system calls.
However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels
before reading to end-of-file (EOF), any tunnel or session reference stored in
pd->tunnel / pd->session is left un-dropped when seq_file private data is freed.
Fix this by dropping any remaining pd->tunnel and pd->session references in
pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. |
| Server-Side Request Forgery (SSRF) in Avro SerDe schema resolution in Apache Hive before 4.2.1 allows an authenticated remote attacker with CREATE TABLE privilege to cause the Hive server to fetch an attacker-controlled URL when resolving the avro.schema.url table property on an Avro table that is subsequently queried. This can expose cloud instance metadata, internal network services, or local server files to the Hive process identity. Users are recommended to upgrade to version 4.2.1, which fixes this issue.
Attacker access requirements:
* Network access to HiveServer2 / Metastore: required (remote attacker model).
* Valid Hive authentication: required.
* CREATE TABLE (or equivalent) privilege: required, so the attacker can set avro.schema.url in table properties.
* SELECT privilege on the malicious table: not required for the creator, who can typically query their own table; any other user granted SELECT can also trigger the fetch.
* Write access to the table LOCATION: not required; the attack uses the schema URL, not the data path.
* Admin / superuser privileges: not required; an ordinary authenticated user with DDL rights is sufficient.
* External tables enabled: typically required in practice, and enabled by default in most deployments.
Detection guidance:
* Inspect metastore / Hive table metadata for Avro tables whose avro.schema.url uses unexpected schemes such as http, https, file, or ftp, or points at link-local / cloud metadata addresses (for example 169.254.169.254) or other internal hosts.
* Review HiveServer2 and Metastore logs around CREATE/ALTER TABLE and queries against Avro tables for schema-resolution failures or outbound fetches of avro.schema.url.
* Correlate CREATE TABLE / ALTER TABLE activity that sets avro.schema.url with subsequent SELECT activity on the same table, especially when the URL target is unusual for schema distribution.
* On cloud deployments, check instance / VPC flow logs and metadata service access logs for unexpected requests from Hive host identities shortly after Avro DDL or query activity. |
| The device metadata import interface /device/instance/{productId}/property-metadata/import of jetlinks community 2.11 is vulnerable to Server-side request forgery (SSRF). |
| A blind server-side request forgery (SSRF) vulnerability WatchGuard Dimension Database Server Test configuration allows an authenticated privileged attacker to enumerate exposed network services on adjacent network systems. |
| A server-side request forgery (SSRF) vulnerability WatchGuard Dimension Remote Backup Connection Test configuration allows an authenticated privileged attacker to enumerate exposed network services on adjacent network systems. |
| A server-side request forgery (SSRF) vulnerability WatchGuard Dimension Email Server Test configuration allows an authenticated privileged attacker to enumerate exposed network services on adjacent network systems. |
| wallabag 2 through 2.6.14 allows SSRF because a crafted title or content field is mishandled during PDF export. |
| JavaScript Cookie is a JavaScript API for handling cookies, client-side. Prior to version 3.0.7, js-cookie's internal assign() helper copies properties with for...in + plain assignment. When the source object is produced by JSON.parse, the JSON object's "__proto__" member is an own enumerable property, so the for…in enumerates it and the target[key] = source[key] write triggers the Object.prototype.__proto__ setter on the fresh target ({}). The result is a per-instance prototype hijack: Object.prototype itself is untouched, but the merged attributes object now inherits attacker-controlled keys. Because the consuming set() function then enumerates the merged object with another for...in, every key the attacker placed on the polluted prototype lands in the resulting Set-Cookie string as an attribute pair. The attacker can set domain=, secure=, samesite=, expires=, and path= on cookies whose attributes the developer thought were locked down. This issue has been patched in version 3.0.7. |
| Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.16.0, the Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into a full Man-in-the-Middle (MITM) attack — intercepting, reading, and modifying all HTTP traffic including authentication credentials. The HTTP adapter at lib/adapters/http.js:670 reads config.proxy via standard property access, which traverses the prototype chain. Because proxy is not present in Axios defaults, the merged config object has no own proxy property, making it trivially injectable via prototype pollution. Once injected, setProxy() routes all HTTP requests through the attacker's proxy server. This vulnerability is fixed in 1.16.0. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled processing instruction data to be serialized into XML without validating or neutralizing the PI-closing sequence ?>. As a result, an attacker can terminate the processing instruction early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. In @xmldom/xmldom prior to versions 0.9.10 and 0.8.13 and xmldom version 0.6.0 and prior, the package allows attacker-controlled comment content to be serialized into XML without validating or neutralizing comment-breaking sequences. As a result, an attacker can terminate the comment early and inject arbitrary XML nodes into the serialized output. This issue has been patched in versions @xmldom/xmldom versions 0.9.10 and 0.8.13. |
| The proxy middleware in mcp-use's inspector forwards requests to a destination the caller names. mountMcpProxy in libraries/typescript/packages/inspector/src/server/proxy/mcp-proxy.ts read the target from the X-Target-URL header or the __mcp_target parameter and proxied to it without inspecting the host, so loopback, link-local and private addresses were all accepted, as were names that resolve to them, and the validation was not reapplied to a redirect the destination returned. A caller could therefore make the server issue requests to addresses reachable only from the host it runs on and read the responses. The current code calls isSafeProxyTarget, which checks the resolved address against private, loopback and link-local ranges before proxying and bounds the number of redirects followed. |
| A server-side request forgery (SSRF) vulnerability WatchGuard Dimension FTP Server Test configuration allows an authenticated privileged attacker to enumerate exposed network services on adjacent network systems. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disallow multiple FENCE chunks in one submit
amdgpu_cs_pass1() dispatches on chunk_id once per chunk without
rejecting repeated ids. p->uf_bo is a single-slot field, so a
submission carrying two AMDGPU_CHUNK_ID_FENCE chunks runs
amdgpu_cs_p1_user_fence() twice, and the second run overwrites
p->uf_bo with a freshly referenced BO without dropping the reference
taken by the first.
amdgpu_cs_parser_fini() only unrefs the final p->uf_bo, so every FENCE
chunk but the last leaks a BO reference. The leaked BO outlives handle
close and process exit.
Reject duplicate FENCE chunks the same way commit fec5f8e8c6bc
("drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit") did
for p->bo_list.
(cherry picked from commit 665b1fc2a1845206408f9a2c6da67101789edb82) |
| GitLab has remediated a vulnerability in the GitLab AI Gateway component affecting all versions of the AI Gateway from 18.9.0 to 19.0.12, 19.1 to 19.1.7, and 19.2 to 19.2.2 that could have allowed an authenticated user with Duo Agent Platform access to redirect model requests to an externally-controlled endpoint via crafted model metadata, resulting in the disclosure of Google Vertex AI or AWS Bedrock cloud service credentials. |
| Budibase backend-core (@budibase/backend-core, as used by @budibase/server) omits the shared address space range 100.64.0.0/10 from its default SSRF blacklist (DEFAULT_BLACKLIST) used by REST datasource query previews. When the default blacklist is active (i.e., a self-hosted deployment has not defined BLACKLIST_IPS), an authenticated user with the Builder permission can submit a REST datasource query preview request to POST /api/queries/preview targeting a reachable HTTP(S) service in the 100.64.0.0/10 range, causing the server to send a request to that target and return its response through the preview flow. Per the advisory, no released fix was identified at the time of publication; remediation is to add 100.64.0.0/10 to DEFAULT_BLACKLIST. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: pair EH runtime PM get and put
shost->eh_noresume is currently consulted twice in one error handling
iteration: once before scsi_autopm_get_host() and once again before
scsi_autopm_put_host().
That is racy when a PM-triggered error path flips shost->eh_noresume
while the SCSI EH thread is still running.
The problem flow looks like this:
PM path
ufshcd_set_dev_pwr_mode()
shost->eh_noresume = 1
ufshcd_execute_start_stop <-- trigger EH
...
shost->eh_noresume = 0
EH path
scsi_error_handler()
if (!shost->eh_noresume)
scsi_autopm_get_host() <-- skipped
...
if (!shost->eh_noresume)
scsi_autopm_put_host() <-- executed later
In that case one EH iteration can skip autoresume on entry and still
drop a runtime PM reference on exit. That leaves an unmatched runtime PM
put and can trigger a runtime PM usage count underflow.
Fix this by making eh_noresume a regular bool so it can be accessed with
READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use
that snapshot for both runtime PM get and put decisions. |
| AVideo before 24.0 contains a server-side request forgery vulnerability in the isSSRFSafeURL function that fails to extract embedded IPv4 addresses from NAT64, 6to4, and Teredo IPv6 transition address formats. Unauthenticated attackers can bypass SSRF protections via the LiveLinks proxy endpoint to reach internal services and cloud metadata endpoints by encoding private IPv4 targets in transition address formats. |
| A weakness has been identified in primefaces primereact up to 10.9.8. This issue affects the function ObjectUtils.mutateFieldData of the file components/lib/utils/ObjectUtils.js of the component API. This manipulation of the argument Field causes improperly controlled modification of object prototype attributes. The attack is possible to be carried out remotely. Upgrading to version 10.9.9 and 11.0.0 is capable of addressing this issue. Patch name: 61f182e11d9ef52032ff56f420da763a6938236f. It is recommended to upgrade the affected component. |
| NLTK before 3.10.0 (affected versions <= 3.9.4) contains a server-side request forgery (SSRF) vulnerability in the validate_network_url() function in nltk/pathsec.py. The _resolve_hostname() helper catches OSError and ValueError during socket.getaddrinfo() and returns an empty list; when DNS resolution fails, the validation loop executes no IP checks and the function fails open, allowing urlopen() to proceed without validation. An attacker who can trigger DNS resolution failures or use DNS rebinding can bypass SSRF protections and reach restricted network resources, including cloud metadata endpoints (e.g., 169.254.169.254). |
