| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use consistent hard_header_len in non-ring send paths
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here. |
| Out of bounds write in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/qeth: validate user buffer length in SNMP and ARP query ioctls
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from
kzalloc(), which the existing NULL check does not catch.
Reject buffers smaller than udata_offset before allocating, so the
callback subtraction can no longer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix off-by-one in rtrefcount btree root level validation
xfs_rtrefcountbt_compute_maxlevels() sets
mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1;
where the trailing "+ 1" already accounts for the inode-root level, so the
deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must
satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels).
The two on-disk validation paths, xfs_rtrefcountbt_verify() and
xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a
crafted rtreflink (metadir + realtime + reflink) image whose
/rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on
mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1,
exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is
sized for exactly bc_maxlevels entries, the first btree op on such a cursor
indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is
reached by the first rtrefcount cursor built after mount, via log/CoW
recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an
FS_IOC_GETFSMAP over the realtime device.
Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form
already used by the sibling data-device refcount/rmap verifiers and the
in-memory rtrmap verifier.
BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
Write of size 2 at addr ffff888018391658 by task exploit/144
xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101)
xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308)
xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113)
xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085)
xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551)
xfs_mountfs (fs/xfs/xfs_mount.c:1158)
xfs_fs_fill_super (fs/xfs/xfs_super.c:1940)
get_tree_bdev_flags (fs/super.c:1634)
vfs_get_tree (fs/super.c:1694)
path_mount (fs/namespace.c:4161)
__x64_sys_mount (fs/namespace.c:4367)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216
The buggy address is located 8 bytes to the right of
allocated 216-byte region [ffff888018391578, ffff888018391650)
Kernel panic - not syncing: Fatal exception |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A heap out-of-bounds write exists in the Photo CD (PCD) decoder of GraphicsMagick. In DecodeImage() (coders/pcd.c), the Huffman delta loop advances its output pointer with q++ after every decoded delta and never checks it against the end of the heap-allocated luma/chroma plane buffers. The pointer is repositioned only when a sync marker introduces a new plane/row; between sync markers the run length is bounded solely by the input.
A crafted PCD file that positions the pointer near the end of a plane and then supplies a long run of deltas with no intervening sync therefore walks the pointer past the end of the allocation and writes through it. Processing an untrusted PCD file — for example with gm convert or gm identify, or through any application linked against libGraphicsMagick — can corrupt heap memory beyond the buffers. |
| OriginLab OriginPro OPJ File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab OriginPro. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OPJ files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29332. |
| Kenwood DNR1007XR tchdr_bytestream_read Out-Of-Bounds Write Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Kenwood DNR1007XR devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the tchdr_bytestream_read function. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-28980. |
| Out of bounds write in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds write in ANGLE in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In onTransact of IDrmManagerService.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| An out-of-bounds (OOB) memory write flaw was found in the Linux kernel’s watch_queue event notification subsystem. This flaw can overwrite parts of the kernel state, potentially allowing a local user to gain privileged access or cause a denial of service on the system. |
| The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp_j.c contains a stack buffer overflow in parse_getconfig_msg(). When handling a GetConfiguration request from the central system, the handler copied the attacker-controlled JSON "key" string into the caller's fixed 50-byte stack buffer (skey[CISTR50], declared in subsys/net/lib/ocpp/ocpp.c) using an unbounded strcpy(). The parsed key value points directly into the receive buffer, so its length is bounded only by the message size (CONFIG_OCPP_RECV_BUFFER_SIZE, default 2048).
The GetConfiguration message is delivered over the WebSocket connection that the charge point opens to its configured central system. The reader thread ocpp_wsreader() reads the message into ui->recv_buf and dispatches it to parse_getconfig_msg() via the PDU function table. An attacker who controls the central system endpoint, or a man-in-the-middle on an unencrypted connection, can send a GetConfiguration request whose "key" field exceeds 50 bytes and overflow the reader thread's stack with attacker-chosen bytes.
The consequence is a remotely triggerable stack smash on the OCPP reader thread: at minimum a denial of service, and plausibly remote code execution depending on build-time hardening such as stack canaries and MPU configuration. The fix replaces the strcpy() with a bounded strncpy(key, payload.key[0], CISTR50 - 1) followed by explicit NUL termination, matching the bounded copies already used by the sibling handlers. |
| The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE.
That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read.
The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution.
The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, exrmultiview can write past a heap allocation when it combines two attacker-supplied, individually valid scanline EXR files whose union dataWindow is not aligned to one view's channel subsampling. The utility allocates sampled channel storage using a truncated union_width / xSampling, then reads the sampled input through a Slice based on the misaligned union window, producing a heap out-of-bounds write. The trigger is normal public-tool processing, such as exrmultiview left A.exr right B.exr out.exr with crafted but valid inputs, so this is not solely an API or caller-precondition issue. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause kernel memory corruption due to insufficient validation. A crafted filesystem image can trigger an out-of-bounds kernel-stack write during directory reads, causing a system crash or potentially enabling privilege escalation. |
| GNU coreutils unexpand is vulnerable to a heap-based buffer overflow due to an integer overflow during buffer allocation when processing large tab stop (-t) values. The multiplication used to calculate the allocation size can wrap around, resulting in an undersized buffer.
When processing crafted input, subsequent writes exceed the allocated memory, leading to an out‑of‑bounds heap write.
When running GNU coreutils unexpand with attacker-provided large tab stop (-t) arguments, this behavior leads to a crash and potentially achieve a heap write primitive depending on memory layout.
This issue has been fixed in the commit b60a159fdc5bfcf9988d3a4cb6f53abe8ad5d35d |
| In binutils 2.46.1 and prior versions, a victim who opens a crafted PE file using binutils could execute arbitrary code unknowningly via a stack buffer overflow out of bounds write. |
