| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Validate size in snd_sof_update_control
In snd_sof_update_control(), firmware-provided cdata->num_elems is
checked against local_cdata->data->size but never against the actual
allocation size. If local_cdata->data->size was previously set to an
inconsistent value, the memcpy could write past the allocated buffer.
Add a bounds check to ensure num_elems fits within the available space
in the ipc_control_data allocation before copying. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a buffer overflow vulnerability in the quicksetup.cgi interface. A remote attacker can write overly long strings to the test4, ssid2, and username fields and execute arbitrary commands by crafting a specific payload, or cause the device to crash. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1. Processing maliciously crafted web content may lead to an unexpected process crash. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1, watchOS 26.1. Processing maliciously crafted web content may lead to memory corruption. |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS may allow an unauthenticated attacker on the same local network segment to execute arbitrary code.
This vulnerability affects Fireware OS 11.0 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2. |
| A security flaw has been discovered in Tenda G0 up to 20260625. Impacted is the function setPortMapping of the file /goform/module of the component httpd web management interface. Performing a manipulation of the argument portMappingServer/porMappingtInternal/portMappingExternal results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix MCIA register buffer overflow on 32 dword reads
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and modify authentication metadata due to a buffer overflow. |
| The device's PROFINET service is affected by a buffer overflow vulnerability that exists in the default configuration. An unauthenticated remote attacker could exploit this vulnerability to reboot the device or execute arbitrary code. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX
adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and
passes it to i2c_smbus_read_block_data() to retrieve the 4-byte
BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour
caller buffer sizes -- it memcpy()s data.block[0] bytes from the
SMBus transaction (where data.block[0] is the length byte returned by
the slave device, up to I2C_SMBUS_BLOCK_MAX = 32):
memcpy(values, &data.block[1], data.block[0]);
If the device returns any block length above 5, the call overflows
the caller's 5-byte stack buffer before the post-call
if (ret != 4)
return -EIO;
check has a chance to reject the response.
Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room
for any well-formed SMBus block response, matching the convention used
by the other i2c_smbus_read_block_data() callers in this driver. |
| A missing bounds check when parsing stored procedure parameter metadata in the MongoDB BI Connector ODBC Driver can result in an out-of-bounds write in the client application process. Triggering this issue requires control over the server the driver connects to, or the ability to respond in its place, in order to return malformed metadata. The resulting memory corruption may cause the client application to terminate abnormally or, under certain conditions, execute unintended code. |
| A buffer copy without checking size of input ('classic buffer overflow') vulnerability in Fortinet FortiClientWindows 7.4.0 through 7.4.3, FortiClientWindows 7.2.0 through 7.2.11 may allow an unauthenticated attacker in a position to alter or craft DNS responses to the targeted host to execute arbitrary code via malicious packets. |
| When expanding paths that begin with a tilde (~) followed by a username, the internal parse_tilde function extracts the username to determine the user's home directory. The implementation allocates memory for this username directly on the stack using the strndupa macro. Because the size of this allocation was determined by the length of the user-supplied input without any bounds checks, passing an excessively long username e.g. thousands of characters, forces the thread to exhaust its stack space. Thus if an application passes untrusted, attacker-controlled input to the wordexp function, an attacker can trigger a stack clash. |
| A vulnerability was identified in Open5GS up to 2.7.1. This issue affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Diameter Rx Handler. The manipulation of the argument num_of_media_component/num_of_sub leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 2.7.2 is capable of addressing this issue. The identifier of the patch is 87b4e4535c77ded627cdb6f4e4e2e3ea761f40b7. It is recommended to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks
Change the krb5 crypto library to provide facilities to precheck the length
of the message about to be decrypted or verified.
Fix AF_RXRPC to make use of this to validate DATA packets secured with
RxGK. |
| Vim is an open source, command line text editor. Prior to 9.2.0842, the socket server backend in src/socketserver.c accepts unbounded client connections in socketserver_accept(), causing descriptors to overflow fd_set structures in src/channel.c and fixed-size struct pollfd arrays in src/os_unix.c, which allows a local process that can connect to the server socket to corrupt stack memory or terminate the Vim server. This issue is fixed in version 9.2.0842. |
| A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a malicious HTTP request. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could disclose data fragments or cause the device to reload, resulting in a denial of service (DoS) condition. |
| A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device.
This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device. |
