| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Postgres MCP Pro 0.3.0 contains a restricted-mode bypass vulnerability where function-name validation is not applied to RangeFunction nodes in FROM clauses. Attackers can execute file-reading functions like pg_read_file through FROM-clause syntax to read arbitrary files despite restricted-mode protections. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix shrinker_info teardown race with expansion
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section. |
| Subscriber Insecure Direct Object References (IDOR) in WC Ukraine Shipping <= 1.22.3 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Quick Event Manager <= 9.17 versions. |
| Improper neutralization of special elements used in an OS command (CWE-78) in the blueprint resynthesis framework in Amazon Web Services codecatalyst-blueprints before 0.3.156 might allow a user with permission to commit to a repository in the project to execute arbitrary commands in the blueprint resynthesis environment via shell metacharacters in the owner field of a [local] merge strategy entry in a crafted .ownership-file.
Version 0.3.156 removes shell interpretation of the owner field, running the command directly rather than through a shell, and rejects values outside an allowlisted command form. This eliminates shell metacharacter command injection. To remediate this issue, users should upgrade to version 0.3.156 or later.
No action is required for use of the Amazon CodeCatalyst service. Resynthesis runs in an isolated per-project environment with scoped credentials, and the service applies server-side validation there that rejects [local] merge strategy commands outside a restricted allowlisted form, including for blueprint versions published before 0.3.156. |
| rubyzip versions before 3.4.0 contain a path traversal vulnerability in Zip::Entry#extract that fails to properly validate extraction paths using prefix comparison without trailing separators. Attackers can craft archive entries with names like ../upload_backup/owned.sh to write files outside the intended extraction directory into sibling paths sharing the destination prefix. |
| toml-node is a TOML parser for Node.js and the browser. Prior to 4.2.0, toml.parse() uses a Peggy 5.1.0 generated recursive-descent parser in lib/parser.js whose peg$parsevalue, peg$parsearray, and peg$parseinline_table_entry functions recurse through nested arrays and inline tables without a depth limit. A remote unauthenticated application parsing an attacker-controlled TOML document containing a few thousand nested arrays or inline tables can exhaust the Node.js call stack, raise an unexpected RangeError rather than the parser's SyntaxError, and terminate an unprotected request worker or process. The corresponding grammar source is src/toml.pegjs, where the generated parser must be bounded. This issue is fixed in version 4.2.0. |
| MOOS essential-moos through version 10.0.1 contains an unauthenticated UDP packet injection vulnerability in pMOOSBridge when configured with UDPListen. Attackers can send crafted UDP packets to the configured port to inject arbitrary variables into the local MOOS community with spoofed source and community identifiers. |
| MOOS essential-moos through 10.0.1 contains a buffer overflow vulnerability in CMOOSUDPLink::ReadPktFromArray() that allows remote attackers to corrupt heap memory by sending UDP datagrams with negative declared lengths. Attackers can send crafted UDP packets to the configured UDPListen port to trigger an oversized memcpy operation that writes past the destination buffer, causing heap corruption and denial of service. |
| MOOS core-moos through 10.4.0 fails to validate that serialized string lengths are non-negative in CMOOSMsg::operator>>. Unauthenticated attackers can send a crafted message with a negative length value to the MOOSDB port, causing an unhandled exception that terminates the database process. |
| MOOS core-moos through 10.4.0 contains a denial of service vulnerability in MOOSCommServer::ListenLoop() where the accept thread performs a blocking receive without timeout during the wire-protocol handshake. An attacker can open a TCP connection to the MOOSDB port and send no data, causing the accept thread to block indefinitely while holding the socket-list lock, preventing all subsequent client connections. |
| MOOS-IvP versions through 24.8.1 contain a quadratic processing vulnerability in uFldNodeComms where each new node identity creates a ledger entry and triggers all-pairs distribution work. Attackers can supply unbounded distinct node names in reports to drive the shoreside broker into quadratic processing, delaying or preventing distribution of legitimate node reports. |
| MOOS-IvP uFldShoreBroker through 24.8.1 fails to limit the number of claimed communities stored in parallel vectors within ShoreBroker::handleMailNodePing(). A single publisher can supply unbounded distinct community names to grow retained state and per-pass work without limit, causing memory exhaustion and performance degradation. |
| MOOS core-moos through 10.4.0 contains a remote process termination vulnerability in the SuicidalSleeper component that uses a hard-coded passphrase for multicast command authorization. Any multicast-reachable peer can enumerate MOOS processes and send termination commands to trigger process shutdown by exploiting the default multicast group and port with the known passphrase. |
| Plaintext storage of a password vulnerability in Menulux Software Inc. Menulux Portal allows Retrieve Embedded Sensitive Data.
This issue affects Menulux Portal: before 20260903211448. |
| Observable response discrepancy vulnerability in Menulux Software Inc. Menulux Portal allows Account Footprinting.
This issue affects Menulux Portal: before 20260903211448. |
| Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in TAC Information Services Internal and External Trade Inc. GOLDENHORN ONEIT allows Blind SQL Injection.
This issue affects GOLDENHORN ONEIT: before Göbeklitepe. |
