| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: fix BAR resource leak on PF number failure
If cn23xx_get_pf_num() fails, the function returns without
unmapping either BAR. Unmap both BARs before returning from
the error path.
Found by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()
If the allocation of fp[i].tpa_info fails, the error path will not free
the struct bnx2x_fastpath allocated earlier, as it is not linked to the
bp structure yet. Fix that by linking it immediately after allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix memory leak in ieee80211_register_hw()
If kmemdup() fails while copying supported band structures, the error
path jumps to fail_rate. This skips rate_control_deinitialize() and
leaks the initialized local->rate_ctrl.
Fix this by adding a fail_band label that shares the rate-control cleanup
path before falling through to the remaining teardown.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still present in
v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
suitable mac80211 device/driver combination to test with, no runtime
testing was able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix matcher leak on resize target setup failure
hws_bwc_matcher_move() allocates a replacement matcher before setting it
as the resize target. If mlx5hws_matcher_resize_set_target() fails, the
replacement matcher is not attached anywhere and is leaked.
Fix the leak by destroying the replacement matcher before returning from
the resize-target failure path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
mlx5 HWS-capable device to test with, no runtime testing was able to be
performed. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix cas_ctl leak on spi_async failure
ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC)
and relies entirely on the SPI completion callback
ca8210_spi_transfer_complete() to free it.
The spi_async() API only invokes the completion callback on successful
submission. On failure it returns a negative error code without ever
queuing the callback, which leaves cas_ctl and its embedded spi_message
and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is
inside the completion callback, so there is no other reclamation path.
ca8210_spi_transfer() is called from ca8210_spi_exchange(), the
interrupt handler ca8210_interrupt_handler(), and from the retry path
inside the completion callback itself. The exchange and interrupt
handler paths loop on -EBUSY, so under sustained SPI bus contention
every retry iteration leaks a fresh cas_ctl (~600 bytes per
occurrence).
Fix it by freeing cas_ctl on the spi_async() error path. While here,
correct the misleading error string: the function calls spi_async(),
not spi_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Free BPID bitmap on setup failure
nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses
a plain kcalloc(). If any of the following devm_kcalloc() allocations for
the BPID mapping arrays fails, the function returns without freeing the
bitmap. Free the BPID bitmap before returning from those error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: destroy DMA pool on CLDMA late init failure
t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before
initializing the TX and RX rings. If any ring initialization
fails, the error path frees the already initialized rings but
leaves the DMA pool allocated.
Destroy md_ctrl->gpd_dmapool on the late-init failure path
to avoid leaking the DMA pool. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsiback_device_action() obtains a command tag in
scsiback_get_pend_req() and submits a task-management request with
target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and
scsiback jumps to the err: label, which sends a response but frees
nothing, leaking the tag.
Impact: a pvSCSI guest can leak the command tags of a LUN's session,
stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests
whenever target_submit_tmr() fails.
transport_generic_free_cmd() cannot be used here. By the time
target_submit_tmr() returns an error it has already run
__target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its
target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via
core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the
pointer dangling. Letting the command release run target_free_cmd_mem()
would then double-free se_tmr_req.
Use the same helper, which returns just the tag, on this path too. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path
returns -ENOSPC without releasing the reference obtained via
kref_get_unless_zero() earlier in the function. All other error paths
correctly drop the reference. This causes a permanent reference leak on the
io_to_abort object.
Additionally, the abort_in_progress flag is left set to true on this path,
which means future abort attempts for the same I/O will immediately return
-EINPROGRESS even though the abort was never submitted, effectively
blocking recovery.
Fix this by adding the missing kref_put() call and reset abort_in_progress
to false, matching the cleanup done in the efct_hw_wq_write() failure path
below. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: unregister blocking notifier on init failure
sparx5_register_notifier_blocks() registers the switchdev blocking
notifier before allocating the ordered workqueue. If the workqueue
allocation fails, the error path unregisters the switchdev and netdevice
notifiers, but leaves the blocking notifier registered.
Add a separate error label for the workqueue allocation failure path and
unregister the switchdev blocking notifier there. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
If phys_disk->in_reset is set, the function returns directly without
undoing the resources acquired for the command. Add the missing error
cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping
the SCSI command, and dropping the outstanding IOACCEL command count
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Release reserved memory on cleanup
The MT8192 AFE probe calls of_reserved_mem_device_init() and falls
back to preallocated buffers when no reserved memory region is
available. When the reserved memory assignment succeeds, however, the
driver never releases it.
Register a devm cleanup action after a successful reserved-memory
assignment so the assignment is released on probe failure and driver
unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix nf_connlabels leak on two error paths
tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when
TCA_CT_LABELS is present, but two later error sites use a bare return
instead of "goto err", skipping the err: nf_connlabels_put() cleanup.
They also precede the "p->put_labels = put_labels" assignment, so the
tcf_ct_params_free() fallback does not release the count either. Each
failed RTM_NEWACTION on these paths leaks one nf_connlabels reference:
net->ct.labels_used is incremented and never released. The action is
reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged
user namespace on default-userns kernels.
Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace
(e.g. via user namespaces) leaks one nf_connlabels reference per failed
RTM_NEWACTION on the two error paths; net->ct.labels_used is never
released.
The err: label is safe to reach from both sites: p->tmpl is still NULL
there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so
no inline release is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix metabuf leak in inode xattr initialization
commit bb88e8da0025 ("erofs: use meta buffers for xattr operations")
converted xattr operations to use on-stack erofs_buf instances.
erofs_init_inode_xattrs() uses such a metabuf while reading the inline
xattr header and shared xattr id array.
Some error paths after erofs_read_metabuf() leave through out_unlock
without dropping the metabuf, so the folio reference can leak.
Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a
no-op if no folio has been acquired, and this keeps all paths after
taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvneta: re-enable percpu interrupt on resume
On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu
IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls
disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules
NAPI poll, which calls enable_percpu_irq() on completion to unmask.
If suspend occurs while NAPI poll is pending (between
disable_percpu_irq in the ISR and enable_percpu_irq in poll
completion), the interrupt is never re-enabled:
1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule()
=> MPIC masked, percpu_enabled cpumask bit cleared
2. NAPI poll does not complete before suspend proceeds
(on PREEMPT_RT this is highly likely since softirqs run in
ksoftirqd which gets frozen; on non-RT it can happen when
softirq processing is deferred to ksoftirqd)
3. mvneta_stop_dev => napi_disable(): cancels the pending poll
without executing the completion path
4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC
(already masked, but records IRQS_SUSPENDED)
5. Resume: mpic_resume checks irq_percpu_is_enabled() => false
(bit was cleared in step 1) => skips unmask
6. mvneta_start_dev only restores device-level INTR_NEW_MASK,
does not touch the MPIC per-CPU mask
Result: MPIC per-CPU interrupt stays masked permanently. The NIC
generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never
receives them, causing complete loss of network connectivity.
Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path
to unconditionally unmask the MPIC per-CPU interrupt regardless of
pre-suspend state. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending and barrier reference leaks on discard failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before calling raid10_handle_discard(). Several failure
paths in raid10_handle_discard() complete the bio and return without
releasing the corresponding reference, causing md_write_end() to be
skipped.
Call md_write_end() before returning from these failure paths to keep
writes_pending accounting balanced.
Additionally, discard split allocation failures can occur after
wait_barrier() succeeds. Those paths return without calling
allow_barrier(), leaking the associated barrier reference.
Release the barrier before returning from those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
