| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clamp route advmss to TCP_MIN_MSS
tcp_select_initial_window() assumes that callers never pass an MSS
smaller than 1, but route-derived advmss values can violate that
assumption.
A too-small explicit RTAX_ADVMSS is one way to get there, but it is not
the only one. The same divide-by-zero can also be reached through the
"default advmss" path when RTAX_ADVMSS is left at 0 and the effective
advmss is later driven down by route MTU and min_adv_mss.
Introduce a tcp_dst_advmss() helper that clamps route advmss to
TCP_MIN_MSS before TCP consumes it, and use it in the TCP paths that
derive advmss from dst metrics. This keeps the effective MSS from
dropping to zero before tcp_select_initial_window() rounds the receive
window. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: drop ESP-in-TCP packets with no ingress device
ESP-in-TCP receives records through the TCP strparser. handle_esp()
restores skb->dev from the saved skb_iif before passing the packet into
the XFRM input path.
Queued TCP data can be processed after the original ingress device has
been removed, for example during veth or net namespace teardown. In that
case dev_get_by_index_rcu() returns NULL. The XFRM IPv4 and IPv6 input
paths both expect skb->dev to be valid while building the route lookup,
so queued ESP-in-TCP data can dereference a NULL device.
Drop the packet if the saved ingress device can no longer be resolved.
Such a packet can no longer be routed through the normal XFRM receive
path, and this preserves the existing behaviour for packets whose ingress
device still exists. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: avoid lock inversion in nat keepalive work
nat_keepalive_work() walks the state table while xfrm_state_walk()
holds net->xfrm.xfrm_state_lock. Its callback then acquires x->lock,
which conflicts with the delete path taking the same locks in reverse
order via xfrm_state_delete() and __xfrm_state_delete(). This creates
an AB-BA deadlock that is reported by lockdep when a NAT keepalive
worker races with SA deletion.
Fix this by splitting the keepalive walk into two phases. First,
collect the candidate states while the walk holds xfrm_state_lock and
take a reference on each state. Then, after the walk completes, process
each collected state and acquire x->lock without nesting it under
xfrm_state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: ah6: validate routing header segments_left
AH6 rearranges routing-header addresses before computing or verifying the
ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than
the number of addresses described by the routing header's hdrlen field.
That assumption does not hold for raw IPv6 HDRINCL packets. A packet with
hdrlen equal to 2 describes one address, but can carry an arbitrary
segments_left value. With segments_left equal to 255, the function moves
its address pointer 4,064 bytes backwards and passes a 4,064-byte length to
memmove(), resulting in an out-of-bounds access.
Validate the invariant locally before modifying the routing header or
performing any address-pointer arithmetic, and propagate malformed-header
errors to the existing AH6 input and output error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix xfrm_state_construct() auth-trunc leak
attach_auth_trunc() can allocate x->aalg while leaving
x->props.aalgo at zero when the selected auth algorithm has no
sadb_alg_id. One real case is cmac(aes).
xfrm_state_construct() then treats !x->props.aalgo as "no auth
algorithm attached yet" and calls attach_auth(). That overwrites
x->aalg and loses the first allocation. Any later failure or teardown
only frees the replacement pointer.
Check whether x->aalg is already attached instead of inferring that
state from x->props.aalgo. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: fix use-after-free of a master VLAN's multicast context
br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under
br->multicast_lock before stopping a VLAN's multicast context. That is
the teardown handshake: lockless readers gate on the flag through
br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so
once it is cleared under the lock no reader can arm the context again.
For a master VLAN the handshake never runs. __vlan_del() clears
BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so
br_multicast_toggle_one_vlan(masterv, false) returns early on
!br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is
never taken. br_vlan_put_master() then drains the context in
br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a
reader still inside rcu_read_lock() sees the context as enabled and
re-arms it. The port and port-VLAN branch of the function has no
br_vlan_is_brentry() test and flips the flag under br->multicast_lock,
so it is not affected.
The reader is the bridge transmit path. For a master VLAN
br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with
pmctx = NULL, so IGMP sent to the bridge device re-arms the context's
timers after br_multicast_ctx_deinit() has already stopped them.
BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0
Write of size 8 at addr ffff88810ac39918 by task brmc/601
__mod_timer+0x51a/0xc50
br_multicast_host_join+0x25b/0x390
__br_multicast_add_group+0x468/0x530
br_ip4_multicast_add_group+0x1a0/0x260
br_multicast_rcv+0x2cda/0x61e0
br_dev_xmit+0x6c4/0x1540
Allocated by task 610:
br_vlan_add+0x111/0xb40
br_vlan_info+0x370/0x3e0
Freed by task 0:
kfree+0x1a7/0x4f0
rcu_core+0x7dc/0x10a0
Only test br_vlan_is_brentry() when enabling, like the
br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then
always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before
br_multicast_ctx_deinit() drains the context. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: defer vmalloc TX_RING free until skbs finish
AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb
page references preserve page-backed ring blocks after pg_vec is freed,
but they do not preserve a vmalloc mapping.
tpacket_destruct_skb() currently drops the pending reference before
writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the
decrement after those stores. The smp_wmb() in __packet_set_status()
orders the frame stores before the decrement.
Also recheck pending TX frames under pg_vec_lock before non-closing
ring replacement, so a racing send cannot add a pending skb between
the initial check and the ring swap.
Ring allocation can produce a mixture of page-backed and vmalloc-backed
blocks. Allocate deferred-work storage during TX ring setup when the
first vmalloc-backed block is encountered, and keep its pointer in the
pg_vec allocation header. If allocation fails, return -ENOMEM from ring
setup. On socket close, a non-NULL pointer identifies a vmalloc-backed
vector without a scan. If TX skbs remain, defer the whole vector to
system_long_wq.
After pg_vec is detached, a late destructor can skip the pending
decrement. Use socket write-memory accounting as the deferred lifetime
gate instead: an skb remains charged through its final sock_wfree(),
after all ring-frame accesses. The delayed work retains a socket
reference and reschedules itself until no TX skbs remain.
Move pending_refcnt release to packet_sock_destruct() so late skb
destructors and deferred cleanup can safely use it after
packet_release(). Page-backed teardown remains synchronous, and no lock
is added to the TX completion hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: seg6: clear IPv4 control block on IPIP decapsulation
End.DX4 and End.DT4 decapsulate an IPv4 packet through
decap_and_validate() and send it directly to IPv4 routing. The inner
packet therefore bypasses ip_rcv_core(), which normally clears IPCB
before IPv4 interprets skb->cb.
The skb instead retains IP6CB data from the outer packet. IP6CB and
IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps
IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and
ts.
The sender can make the stale optlen byte nonzero with a valid outer
extension-header chain. The reproducers put an eight-byte Destination
Options header immediately after the 40-byte IPv6 header and before the
Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled
Destination Options offset in both lastopt and nhoff, setting them to
40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees
optlen = 40 and rr = 40.
Both tcp_v4_save_options() and __ip_options_echo() skip option copying
when optlen is zero. Here optlen is 40, so the TCP SYN path allocates
room for 40 bytes of option data and calls __ip_options_echo(). The
stale rr value makes that function read inner packet byte 41 as the
Record Route option length. The reproducers set that sender-controlled
byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte
option-data area.
Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5
kernel both produced:
BUG: KASAN: slab-out-of-bounds in __ip_options_echo()
Write of size 255
The relevant End.DX4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dx4_finish
input_action_end_dx4
The relevant End.DT4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dt4
tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so
it does not appear as a separate frame.
When decap_and_validate() handles IPPROTO_IPIP, save the ingress
interface from IP6CB, clear IPCB, and restore the saved value. Doing
this in the common decapsulation path covers End.DX4, End.DT4, and
End.DT46's IPv4 arm.
Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after
l3mdev processing, which can replace skb_iif with the L3 master;
IP6CB iif still records the receiving interface set at IPv6 ingress. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject unrepresentable multicast TVLV offsets
The network and transport header fields in struct sk_buff are 16-bit
offsets from skb->head, and U16_MAX is reserved as the unset transport
header value. batadv_tvlv_call_handler() sets both fields from a received
multicast TVLV without checking whether the TVLV end is representable.
If the end offset exceeds the field's range, skb_set_transport_header()
truncates it so that the transport header precedes the network header.
The negative difference is then returned by skb_network_header_len() as
a large u32. batadv_mcast_forw_packet() consequently accepts an oversized
multicast tracker and accesses memory beyond the skb data.
Add skb_set_transport_header_careful(), an offset-aware counterpart to
skb_reset_transport_header_careful(), which validates the final
head-relative offset before assigning it. Use the new helper in
batadv_tvlv_call_handler() and reject unrepresentable TVLVs before
setting the network header. |
| ** UNSUPPORTED WHEN ASSIGNED ** Deserialization of Untrusted Data vulnerability in Apache Lucy.
This issue affects Apache Lucy: all versions.
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
Lucy is now maintained outside of the ASF at https://github.com/lucysearch . 0.8.0 is no longer affected by this issue, because the offending feature has been removed there.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: keep the last remote linked during FDB flush
A non-nexthop FDB entry is expected to have at least one remote while it
remains reachable through the FDB hash table. A filtered bulk flush
violates this invariant when every remote matches: It unlinks the last
remote in vxlan_fdb_dst_destroy() and only afterwards tells vxlan_flush()
to destroy the parent FDB entry.
An RCU reader can find the parent during this interval.
first_remote_rcu() then applies list_entry_rcu() to the empty list head,
producing an invalid remote pointer that the receive learning path can
read from and write to.
When a matching remote is the sole remaining remote, leave it linked and
ask the caller to destroy the entire FDB entry. vxlan_fdb_destroy() keeps
the remote attached while sending the deletion notification and removing
the parent from the lookup structures. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: don't queue packet path object notifications
All file:line references below are against v7.2-rc4 (ac5b0e5651b1). The
trace was captured on 7.2.0-rc6-kasan72rc6 (075b74841bd0), where the same
lines apply.
nft_obj_notify() is exported and reached from the packet path. Its only
in-tree caller is nft_quota_obj_eval() (net/netfilter/nft_quota.c:68),
which notifies with GFP_ATOMIC while evaluating a rule for a transiting
packet, holding no mutex.
Since commit 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple
notifications into one skbuff") that notification is no longer sent
immediately. __nft_obj_notify() queues it onto nft_net->notify_list via
nft_notify_enqueue() (net/netfilter/nf_tables_api.c:1211), which is a bare
list_add_tail(). notify_list has no lock of its own
(include/net/netfilter/nf_tables.h:1951), it is serialised by commit_mutex:
the six other enqueue sites all run inside a netlink transaction, and the
drain in nft_commit_notify() (net/netfilter/nf_tables_api.c:10746) does
list_del() + kfree_skb() from nf_tables_commit() with commit_mutex held.
Sending packets through a chain that references a depleted quota object
therefore races an unlocked list_add_tail() against list_del() +
kfree_skb() on another CPU. The WRITE_ONCE(prev->next, new) in __list_add()
then stores through an sk_buff that has already been freed:
BUG: KASAN: slab-use-after-free in __nft_obj_notify+0x2c5/0x2d0
Write of size 8 at addr ff110001047183c0 by task poc/76
CPU: 0 UID: 1000 PID: 76 Comm: poc Tainted: G W 7.2.0-rc6-kasan72rc6 #4
Call Trace:
<IRQ>
__nft_obj_notify (include/linux/list.h:164 include/linux/list.h:191
net/netfilter/nf_tables_api.c:1211
net/netfilter/nf_tables_api.c:8743)
nft_quota_obj_eval (net/netfilter/nft_quota.c:68)
nft_do_chain_inet
nf_hook_slow
__ip_local_out
ip_push_pending_frames
udp_send_skb
udp_sendmsg
__x64_sys_sendto
Allocated by task 77:
__alloc_skb (net/core/skbuff.c:704)
__nft_obj_notify (include/net/netlink.h:1055
net/netfilter/nf_tables_api.c:8731)
nft_quota_obj_eval (net/netfilter/nft_quota.c:68)
nft_do_chain
Freed by task 79:
nf_tables_commit (include/linux/skbuff.h:1332
net/netfilter/nf_tables_api.c:10759
net/netfilter/nf_tables_api.c:11185)
nfnetlink_rcv_batch (net/netfilter/nfnetlink.c:574)
netlink_unicast
netlink_sendmsg
The buggy address belongs to the cache skbuff_head_cache of size 232
Queueing from the packet path is wrong even leaving the race aside:
notify_list is only drained by nft_commit_notify() from nf_tables_commit()
(:11185), so a notification enqueued outside a transaction is not sent
until some later netlink batch commits, if one ever does.
The gfp argument that nft_obj_notify() still takes is a leftover of the
pre-67cc570edaa0 behaviour, where this path called nfnetlink_send()
directly. Restore that: split the message construction out into
nft_obj_notify_alloc() and let each caller decide what to do with the skb.
nft_obj_notify(), the exported one reached from the packet path, sends it
straight away; nf_tables_obj_notify(), which runs under commit_mutex, keeps
queueing it, so transaction notifications are still coalesced. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - bound the akcipher result length
virtio_crypto_dataq_akcipher_callback() sets the result length from the
device-reported response length without bounding it to the destination
buffer, which was allocated for the original request length.
sg_copy_from_buffer() then reads that many bytes from the destination
buffer; a backend reporting a larger length over-reads adjacent kernel
heap into the caller's scatterlist (an out-of-bounds read).
Clamp the reported length to the originally requested destination length.
A conforming device reports no more than that, so valid results are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qcom-rng - Remove crypto_rng interface
qcom-rng.c exposes the same hardware through two completely separate
interfaces, crypto_rng and hwrng. However, the implementation of this
is buggy because it permits generation operations from these interfaces
to run concurrently with each other, accessing the same registers. That
is, qcom_rng_generate() synchronizes with itself but not with
qcom_hwrng_read(). This results in potential repetition of output from
the RNG, output of non-random values, etc.
Fortunately, there's actually no point in hardware RNG drivers
implementing the crypto_rng interface. It's not actually used by
anything besides the "rng" algorithm type of AF_ALG, which in turn is
not actually used in practice. Other crypto_rng hardware drivers are
likewise being phased out, leaving just the hwrng support.
Thus, remove it to simplify the code and avoid conflict (and confusion)
with the hwrng interface which is the one that actually matters. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ss - Remove crypto_rng interface
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix CCM AAD buffer underallocation
The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen()
can be smaller than the length later programmed into the DMA
scatterlist.
The allocation size is currently calculated as:
ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN
while the DMA length is set to:
ALIGN(assoclen + adata_header_len, 16)
Since ALIGN() does not distribute over addition, the allocation
can be smaller than the DMA length. For example, when
assoclen = 32 and adata_header_len = 2:
allocation = ALIGN(32, 16) + 6 = 38
DMA length = ALIGN(32 + 2, 16) = 48
As a result, the QCE hardware can read beyond the allocated
buffer while computing the CBC-MAC over the associated data.
The extra bytes are folded into the authentication tag,
resulting in an incorrect tag and causing CCM self-test
failures such as:
alg: aead: ccm-aes-qce encryption test failed (wrong result)
on test vector 8
Fix the allocation by adding the maximum possible AAD header
length before alignment:
ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16)
This guarantees that the allocated buffer is large enough
for the fully padded AAD data for all supported header sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - fix source scatterlist length access
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: Add lock to usb_wakeup_notification()
Add a spin lock to usb_wakeup notification to prevent a race condition
with dereferencing freed memory. This could be hit by the xHCI driver as
it calls this function from an IRQ and could race with the
hub_disconnect() function, which properly grabs this lock to protect the
state of the device. |
