| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arp: do not assume dev_hard_header() does not change skb->head
arp_create() is the only dev_hard_header() caller
making assumption about skb->head being unchanged.
A recent commit broke this assumption.
Initialize @arp pointer after dev_hard_header() call. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: complete pending data exchange on device close
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies 4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: common: st_sensors: Fix use of uninitialize device structs
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1] |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: don't ignore IO flags
If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.
Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.
Fix those problems by keep IO flags from master bio.
Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") |
| In the Linux kernel, the following vulnerability has been resolved:
x86/fred: Correct speculative safety in fred_extint()
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata: cancel pending work after clearing deferred_qc
Syzbot reported a WARN_ON() in ata_scsi_deferred_qc_work(), caused by
ap->ops->qc_defer() returning non-zero before issuing the deferred qc.
ata_scsi_schedule_deferred_qc() is called during each command completion.
This function will check if there is a deferred QC, and if
ap->ops->qc_defer() returns zero, meaning that it is possible to queue the
deferred qc at this time (without being deferred), then it will queue the
work which will issue the deferred qc.
Once the work get to run, which can potentially be a very long time after
the work was scheduled, there is a WARN_ON() if ap->ops->qc_defer() returns
non-zero.
While we hold the ap->lock both when assigning and clearing deferred_qc,
and the work itself holds the ap->lock, the code currently does not cancel
the work after clearing the deferred qc.
This means that the following scenario can happen:
1) One or several NCQ commands are queued.
2) A non-NCQ command is queued, gets stored in ap->deferred_qc.
3) Last NCQ command gets completed, work is queued to issue the deferred
qc.
4) Timeout or error happens, ap->deferred_qc is cleared. The queued work is
currently NOT canceled.
5) Port is reset.
6) One or several NCQ commands are queued.
7) A non-NCQ command is queued, gets stored in ap->deferred_qc.
8) Work is finally run. Yet at this time, there is still NCQ commands in
flight.
The work in 8) really belongs to the non-NCQ command in 2), not to the
non-NCQ command in 7). The reason why the work is executed when it is not
supposed to, is because it was never canceled when ap->deferred_qc was
cleared in 4). Thus, ensure that we always cancel the work after clearing
ap->deferred_qc.
Another potential fix would have been to let ata_scsi_deferred_qc_work() do
nothing if ap->ops->qc_defer() returns non-zero. However, canceling the
work when clearing ap->deferred_qc seems slightly more logical, as we hold
the ap->lock when clearing ap->deferred_qc, so we know that the work cannot
be holding the lock. (The function could be waiting for the lock, but that
is okay since it will do nothing if ap->deferred_qc is not set.) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix error handling in slot reset
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
(cherry picked from commit bb71362182e59caa227e4192da5a612b09349696) |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix admin queue leak on controller reset
When nvme_alloc_admin_tag_set() is called during a controller reset,
a previous admin queue may still exist. Release it properly before
allocating a new one to avoid orphaning the old queue.
This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix
admin request_queue lifetime"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211()
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe()
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Fix kernel stack leak in ionic_create_cq()
struct ionic_cq_resp resp {
__u32 cqid[2]; // offset 0 - PARTIALLY SET (see below)
__u8 udma_mask; // offset 8 - SET (resp.udma_mask = vcq->udma_mask)
__u8 rsvd[7]; // offset 9 - NEVER SET <- LEAK
};
rsvd[7]: 7 bytes of stack memory leaked unconditionally.
cqid[2]: The loop at line 1256 iterates over udma_idx but skips indices
where !(vcq->udma_mask & BIT(udma_idx)). The array has 2 entries but
udma_count could be 1, meaning cqid[1] might never be written via
ionic_create_cq_common(). If udma_mask only has bit 0 set, cqid[1] (4
bytes) is also leaked. So potentially 11 bytes leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/client: Do not destroy NULL modes
'modes' in drm_client_modeset_probe may fail to kcalloc. If this
occurs, we jump to 'out', calling modes_destroy on it, which
dereferences it. This may result in a NULL pointer dereference in the
error case. Prevent that. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix side-effect bug in match_char() macro usage
The match_char() macro evaluates its character parameter multiple
times when traversing differential encoding chains. When invoked
with *str++, the string pointer advances on each iteration of the
inner do-while loop, causing the DFA to check different characters
at each iteration and therefore skip input characters.
This results in out-of-bounds reads when the pointer advances past
the input buffer boundary.
[ 94.984676] ==================================================================
[ 94.985301] BUG: KASAN: slab-out-of-bounds in aa_dfa_match+0x5ae/0x760
[ 94.985655] Read of size 1 at addr ffff888100342000 by task file/976
[ 94.986319] CPU: 7 UID: 1000 PID: 976 Comm: file Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy)
[ 94.986322] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 94.986329] Call Trace:
[ 94.986341] <TASK>
[ 94.986347] dump_stack_lvl+0x5e/0x80
[ 94.986374] print_report+0xc8/0x270
[ 94.986384] ? aa_dfa_match+0x5ae/0x760
[ 94.986388] kasan_report+0x118/0x150
[ 94.986401] ? aa_dfa_match+0x5ae/0x760
[ 94.986405] aa_dfa_match+0x5ae/0x760
[ 94.986408] __aa_path_perm+0x131/0x400
[ 94.986418] aa_path_perm+0x219/0x2f0
[ 94.986424] apparmor_file_open+0x345/0x570
[ 94.986431] security_file_open+0x5c/0x140
[ 94.986442] do_dentry_open+0x2f6/0x1120
[ 94.986450] vfs_open+0x38/0x2b0
[ 94.986453] ? may_open+0x1e2/0x2b0
[ 94.986466] path_openat+0x231b/0x2b30
[ 94.986469] ? __x64_sys_openat+0xf8/0x130
[ 94.986477] do_file_open+0x19d/0x360
[ 94.986487] do_sys_openat2+0x98/0x100
[ 94.986491] __x64_sys_openat+0xf8/0x130
[ 94.986499] do_syscall_64+0x8e/0x660
[ 94.986515] ? count_memcg_events+0x15f/0x3c0
[ 94.986526] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986540] ? handle_mm_fault+0x1639/0x1ef0
[ 94.986551] ? vma_start_read+0xf0/0x320
[ 94.986558] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986561] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986563] ? fpregs_assert_state_consistent+0x50/0xe0
[ 94.986572] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986574] ? arch_exit_to_user_mode_prepare+0x9/0xb0
[ 94.986587] ? srso_alias_return_thunk+0x5/0xfbef5
[ 94.986588] ? irqentry_exit+0x3c/0x590
[ 94.986595] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 94.986597] RIP: 0033:0x7fda4a79c3ea
Fix by extracting the character value before invoking match_char,
ensuring single evaluation per outer loop. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix: limit the number of levels of policy namespaces
Currently the number of policy namespaces is not bounded relying on
the user namespace limit. However policy namespaces aren't strictly
tied to user namespaces and it is possible to create them and nest
them arbitrarily deep which can be used to exhaust system resource.
Hard cap policy namespaces to the same depth as user namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: replace recursive profile removal with iterative approach
The profile removal code uses recursion when removing nested profiles,
which can lead to kernel stack exhaustion and system crashes.
Reproducer:
$ pf='a'; for ((i=0; i<1024; i++)); do
echo -e "profile $pf { \n }" | apparmor_parser -K -a;
pf="$pf//x";
done
$ echo -n a > /sys/kernel/security/apparmor/.remove
Replace the recursive __aa_profile_list_release() approach with an
iterative approach in __remove_profile(). The function repeatedly
finds and removes leaf profiles until the entire subtree is removed,
maintaining the same removal semantic without recursion. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix memory leak in verify_header
The function sets `*ns = NULL` on every call, leaking the namespace
string allocated in previous iterations when multiple profiles are
unpacked. This also breaks namespace consistency checking since *ns
is always NULL when the comparison is made.
Remove the incorrect assignment.
The caller (aa_unpack) initializes *ns to NULL once before the loop,
which is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: Fix race condition in peer_mep deletion
When a peer MEP is being deleted, cancel_delayed_work_sync() is called
on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in
softirq context under rcu_read_lock (without RTNL) and can re-schedule
ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync()
returning and kfree_rcu() being called.
The following is a simple race scenario:
cpu0 cpu1
mep_delete_implementation()
cancel_delayed_work_sync(ccm_rx_dwork);
br_cfm_frame_rx()
// peer_mep still in hlist
if (peer_mep->ccm_defect)
ccm_rx_timer_start()
queue_delayed_work(ccm_rx_dwork)
hlist_del_rcu(&peer_mep->head);
kfree_rcu(peer_mep, rcu);
ccm_rx_work_expired()
// on freed peer_mep
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync() in both peer MEP deletion paths, so
that subsequent queue_delayed_work() calls from br_cfm_frame_rx()
are silently rejected.
The cc_peer_disable() helper retains cancel_delayed_work_sync()
because it is also used for the CC enable/disable toggle path where
the work must remain re-schedulable. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reviwed-by: Sean Anderson <sean.anderson@linux.dev> |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix locking for bcm_op runtime updates
Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly. |
