| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix recursive locking in RPC handle list access
Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
Function kvm_io_bus_read() is called in function send_ipi_data(), buffer
size of parameter *val should be at least 8 bytes. Since some emulation
functions like loongarch_ipi_readl() and kvm_eiointc_read() will write
the buffer *val with 8 bytes signed extension regardless parameter len.
Otherwise there will be buffer overflow issue when CONFIG_STACKPROTECTOR
is enabled. The bug report is shown as follows:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: send_ipi_data+0x194/0x1a0 [kvm]
CPU: 11 UID: 107 PID: 2692 Comm: CPU 0/KVM Not tainted 6.17.0-rc1+ #102 PREEMPT(full)
Stack : 9000000005901568 0000000000000000 9000000003af371c 900000013c68c000
900000013c68f850 900000013c68f858 0000000000000000 900000013c68f998
900000013c68f990 900000013c68f990 900000013c68f6c0 fffffffffffdb058
fffffffffffdb0e0 900000013c68f858 911e1d4d39cf0ec2 9000000105657a00
0000000000000001 fffffffffffffffe 0000000000000578 282049464555206e
6f73676e6f6f4c20 0000000000000001 00000000086b4000 0000000000000000
0000000000000000 0000000000000000 9000000005709968 90000000058f9000
900000013c68fa68 900000013c68fab4 90000000029279f0 900000010153f940
900000010001f360 0000000000000000 9000000003af3734 000000004390000c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d
...
Call Trace:
[<9000000003af3734>] show_stack+0x5c/0x180
[<9000000003aed168>] dump_stack_lvl+0x6c/0x9c
[<9000000003ad0ab0>] vpanic+0x108/0x2c4
[<9000000003ad0ca8>] panic+0x3c/0x40
[<9000000004eb0a1c>] __stack_chk_fail+0x14/0x18
[<ffff8000023473f8>] send_ipi_data+0x190/0x1a0 [kvm]
[<ffff8000023313e4>] __kvm_io_bus_write+0xa4/0xe8 [kvm]
[<ffff80000233147c>] kvm_io_bus_write+0x54/0x90 [kvm]
[<ffff80000233f9f8>] kvm_emu_iocsr+0x180/0x310 [kvm]
[<ffff80000233fe08>] kvm_handle_gspr+0x280/0x478 [kvm]
[<ffff8000023443e8>] kvm_handle_exit+0xc0/0x130 [kvm] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: Fix semi-unbounded recursion
Ensure that epoll instances can never form a graph deeper than
EP_MAX_NESTS+1 links.
Currently, ep_loop_check_proc() ensures that the graph is loop-free and
does some recursion depth checks, but those recursion depth checks don't
limit the depth of the resulting tree for two reasons:
- They don't look upwards in the tree.
- If there are multiple downwards paths of different lengths, only one of
the paths is actually considered for the depth check since commit
28d82dc1c4ed ("epoll: limit paths").
Essentially, the current recursion depth check in ep_loop_check_proc() just
serves to prevent it from recursing too deeply while checking for loops.
A more thorough check is done in reverse_path_check() after the new graph
edge has already been created; this checks, among other things, that no
paths going upwards from any non-epoll file with a length of more than 5
edges exist. However, this check does not apply to non-epoll files.
As a result, it is possible to recurse to a depth of at least roughly 500,
tested on v6.15. (I am unsure if deeper recursion is possible; and this may
have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion
problem").)
To fix it:
1. In ep_loop_check_proc(), note the subtree depth of each visited node,
and use subtree depths for the total depth calculation even when a subtree
has already been visited.
2. Add ep_get_upwards_depth_proc() for similarly determining the maximum
depth of an upwards walk.
3. In ep_loop_check(), use these values to limit the total path length
between epoll nodes to EP_MAX_NESTS edges. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash
Currently, we encounter the following kernel call trace when a firmware
crash occurs. This happens because the host sends WMI commands to the
firmware while it is in recovery, causing the commands to fail and
resulting in the kernel call trace.
Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the
host driver receives the firmware crash notification from MHI. This
prevents sending WMI commands to the firmware during recovery.
Call Trace:
<TASK>
dump_stack_lvl+0x75/0xc0
register_lock_class+0x6be/0x7a0
? __lock_acquire+0x644/0x19a0
__lock_acquire+0x95/0x19a0
lock_acquire+0x265/0x310
? ath12k_ce_send+0xa2/0x210 [ath12k]
? find_held_lock+0x34/0xa0
? ath12k_ce_send+0x56/0x210 [ath12k]
_raw_spin_lock_bh+0x33/0x70
? ath12k_ce_send+0xa2/0x210 [ath12k]
ath12k_ce_send+0xa2/0x210 [ath12k]
ath12k_htc_send+0x178/0x390 [ath12k]
ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k]
ath12k_wmi_cmd_send+0x62/0x190 [ath12k]
ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1
ath12k_mac_op_get_survey+0x2be/0x310 [ath12k]
ieee80211_dump_survey+0x99/0x240 [mac80211]
nl80211_dump_survey+0xe7/0x470 [cfg80211]
? kmalloc_reserve+0x59/0xf0
genl_dumpit+0x24/0x70
netlink_dump+0x177/0x360
__netlink_dump_start+0x206/0x280
genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0
? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0
? genl_op_lock.part.12+0x10/0x10
? genl_dumpit+0x70/0x70
genl_rcv_msg+0x1d0/0x290
? nl80211_del_station+0x330/0x330 [cfg80211]
? genl_get_cmd_both+0x50/0x50
netlink_rcv_skb+0x4f/0x100
genl_rcv+0x1f/0x30
netlink_unicast+0x1b6/0x260
netlink_sendmsg+0x31a/0x450
__sock_sendmsg+0xa8/0xb0
____sys_sendmsg+0x1e4/0x260
___sys_sendmsg+0x89/0xe0
? local_clock_noinstr+0xb/0xc0
? rcu_is_watching+0xd/0x40
? kfree+0x1de/0x370
? __sys_sendmsg+0x7a/0xc0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix node corruption in ar->arvifs list
In current WLAN recovery code flow, ath12k_core_halt() only reinitializes
the "arvifs" list head. This will cause the list node immediately following
the list head to become an invalid list node. Because the prev of that node
still points to the list head "arvifs", but the next of the list head
"arvifs" no longer points to that list node.
When a WLAN recovery occurs during the execution of a vif removal, and it
happens before the spin_lock_bh(&ar->data_lock) in
ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned
situation, thereby triggering a kernel panic.
The fix is to remove and reinitialize all vif list nodes from the list head
"arvifs" during WLAN halt. The reinitialization is to make the list nodes
valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute
normally.
Call trace:
__list_del_entry_valid_or_report+0xd4/0x100 (P)
ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k]
ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k]
cfg80211_wiphy_work+0xfc/0x100
process_one_work+0x164/0x2d0
worker_thread+0x254/0x380
kthread+0xfc/0x100
ret_from_fork+0x10/0x20
The change is mostly copied from the ath11k patch:
https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: do not update checksum in bnxt_xdp_build_skb()
The bnxt_rx_pkt() updates ip_summed value at the end if checksum offload
is enabled.
When the XDP-MB program is attached and it returns XDP_PASS, the
bnxt_xdp_build_skb() is called to update skb_shared_info.
The main purpose of bnxt_xdp_build_skb() is to update skb_shared_info,
but it updates ip_summed value too if checksum offload is enabled.
This is actually duplicate work.
When the bnxt_rx_pkt() updates ip_summed value, it checks if ip_summed
is CHECKSUM_NONE or not.
It means that ip_summed should be CHECKSUM_NONE at this moment.
But ip_summed may already be updated to CHECKSUM_UNNECESSARY in the
XDP-MB-PASS path.
So the by skb_checksum_none_assert() WARNS about it.
This is duplicate work and updating ip_summed in the
bnxt_xdp_build_skb() is not needed.
Splat looks like:
WARNING: CPU: 3 PID: 5782 at ./include/linux/skbuff.h:5155 bnxt_rx_pkt+0x479b/0x7610 [bnxt_en]
Modules linked in: bnxt_re bnxt_en rdma_ucm rdma_cm iw_cm ib_cm ib_uverbs veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_]
CPU: 3 UID: 0 PID: 5782 Comm: socat Tainted: G W 6.14.0-rc4+ #27
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bnxt_rx_pkt+0x479b/0x7610 [bnxt_en]
Code: 54 24 0c 4c 89 f1 4c 89 ff c1 ea 1f ff d3 0f 1f 00 49 89 c6 48 85 c0 0f 84 4c e5 ff ff 48 89 c7 e8 ca 3d a0 c8 e9 8f f4 ff ff <0f> 0b f
RSP: 0018:ffff88881ba09928 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000c7590303 RCX: 0000000000000000
RDX: 1ffff1104e7d1610 RSI: 0000000000000001 RDI: ffff8881c91300b8
RBP: ffff88881ba09b28 R08: ffff888273e8b0d0 R09: ffff888273e8b070
R10: ffff888273e8b010 R11: ffff888278b0f000 R12: ffff888273e8b080
R13: ffff8881c9130e00 R14: ffff8881505d3800 R15: ffff888273e8b000
FS: 00007f5a2e7be080(0000) GS:ffff88881ba00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff2e708ff8 CR3: 000000013e3b0000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
? __warn+0xcd/0x2f0
? bnxt_rx_pkt+0x479b/0x7610
? report_bug+0x326/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x14/0x50
? asm_exc_invalid_op+0x16/0x20
? bnxt_rx_pkt+0x479b/0x7610
? bnxt_rx_pkt+0x3e41/0x7610
? __pfx_bnxt_rx_pkt+0x10/0x10
? napi_complete_done+0x2cf/0x7d0
__bnxt_poll_work+0x4e8/0x1220
? __pfx___bnxt_poll_work+0x10/0x10
? __pfx_mark_lock.part.0+0x10/0x10
bnxt_poll_p5+0x36a/0xfa0
? __pfx_bnxt_poll_p5+0x10/0x10
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x899/0xd00
...
Following ping.py patch adds xdp-mb-pass case. so ping.py is going
to be able to reproduce this issue. |
| cJSON through 1.7.19 is vulnerable to uncontrolled recursion leading to stack exhaustion when an untrusted RFC 6902 JSON Patch is applied via cJSONUtils_ApplyPatches() or cJSONUtils_ApplyPatchesCaseSensitive(). A patch containing add and copy operations grafts duplicated subtrees to amplify document depth beyond the parser's nesting limit: cJSON_Delete() recurses with no depth bound, and the cJSON_Duplicate() guard CJSON_CIRCULAR_LIMIT is set to 10000, ten times the parser's 1000-level nesting limit and high enough to overflow a default thread stack. An attacker who can supply the patch document can crash the process, resulting in denial of service. |
| The Apache Traffic Server ESI plugin can recurse without bound and fetch attacker-controlled URLs.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.9, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is affected by a denial of service vulnerability when the restConnector-2.0 feature is enabled. |
| When the module renders a Svg file that contains a <pattern> element, it might end up rendering it recursively leading to stack overflow DoS |
| A flaw has been found in ggml-org llama.cpp e15efe0. This vulnerability affects the function transform of the file common/json-schema-to-grammar.cpp of the component JSON-Schema-to-GBNF Conversion. This manipulation causes uncontrolled recursion. The attack may be initiated remotely. The pull request to fix this issue awaits acceptance. |
| Pivotick contains an uncontrolled-recursion vulnerability when processing caller-supplied graph and node data. The affected graph algorithms recursively traversed graph edges, while the JSON viewer recursively processed each level of a node’s data structure. A specially crafted graph containing an excessively long path, deeply nested properties, or circular object references could therefore exhaust the JavaScript call stack when Pivotick calculates a layout or displays a node in the inspection modal.
Successful exploitation may cause an uncaught exception, freeze the affected page, or crash the browser tab, resulting in a client-side denial of service. No confidentiality or integrity impact has been identified.
The patch replaces the recursive graph traversals with iterative stack-based implementations and limits the reachability calculation to 1,000,000 edge traversals. It also limits JSON rendering to 64 levels and detects circular references before descending further into an object. |
| Vvveb before 1.0.8.3 contains an uncontrolled recursion vulnerability in the admin controller dispatch cycle where Base::init() repeatedly invokes permission() on error handlers, causing infinite recursion until PHP memory limits are exhausted. Attackers can send sustained requests to forbidden admin URLs from a low-privilege account to exhaust PHP memory on all workers and cause denial of service to legitimate traffic. |
| SurrealDB versions before 1.1.0 fail to enforce recursion depth limits when parsing nested SurrealQL statements including IF, RELATE, and attribute access idioms. Authorized attackers can submit queries with excessive nesting depth to cause stack overflow and crash the server. |
| SurrealDB before 3.1.0 fails to enforce the configured recursion depth limit in the value and JSON parser when processing nested braces, brackets, or parentheses. Unauthenticated attackers can send deeply nested JSON payloads to the WebSocket /rpc endpoint to exhaust server memory and crash the process. |
| SurrealDB before 3.1.0 fails to enforce recursion depth limits in the type/kind parser when processing nested type annotations. Authenticated attackers can send queries with deeply nested type annotations to exhaust server memory and crash the process. |
| SurrealDB versions before 3.1.5 contain a denial of service vulnerability where authenticated users can crash the server with queries containing long chains of operators. Attackers can submit queries with tens of thousands of chained operators that create unbounded expression trees, causing stack overflow during query processing and aborting the entire process. |
| In NLnet Labs Unbound 1.16.2 up to and including 1.25.1, a similar vulnerability as with CVE-2026-40622 in the 'ghost domain names' family of attacks was found in Unbound that could extend the ghost domain window by up to one cached TTL configured value for A/AAAA glue records. Similar to other 'ghost domain names' attacks, an adversary needs to control a (ghost) zone and be able to query a vulnerable Unbound. A single client A/AAAA query can cause Unbound to overwrite the cached expired parent-side glue rrset and essentially extend the ghost domain window by up to one cached TTL configured value ('cache-max-ttl'). In configurations where 'harden-referral-path: yes' is used (non-default configuration), no client query is required since Unbound implicitly performs that query. This is a variant of CVE-2026-40622 which only addressed the NS query. |
| The Erlang/OTP ssl application does not detect cycles when reconstructing an incomplete peer certificate chain during a TLS or DTLS handshake. In ssl_certificate:handle_incomplete_chain/5, the received chain is passed to ssl_certificate:build_certificate_chain/5, which walks issuer relationships via ssl_certificate:do_certificate_chain/7 with no cycle detection and no depth limit. When the peer supplies two mutually cross-signed certificates in unordered form (A issues B, B issues A), the issuer lookup alternates between the two certificates and the pair of functions recurses indefinitely, growing the call stack and chain accumulator without bound.
An unauthenticated remote attacker can send a crafted certificate chain in a TLS or DTLS Certificate handshake message to exhaust available memory and crash the BEAM node. Only a TCP connection and a partial handshake are required; no authentication or completed handshake is needed, and both TLS/DTLS servers and clients are affected when processing peer certificate messages.
This issue affects OTP from OTP 23.2 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to ssl from 10.2 before 11.7.4, 11.6.0.4 and 11.2.12.11. |
