| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: fix buffer over-read in btintel_hw_error()
The "Exception info %s" print uses skb->data + 1, but the 12-byte
payload is not guaranteed to be NUL-terminated and can be read past
its end.
Bound the print with "%.*s" and skb->len - 1. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Serialize fragmented ISO packet queueing
The fragmented path in hci_queue_iso() calls __skb_queue_tail() without
holding conn->data_q.lock. The socket lock serializes senders, but the
transmit worker can concurrently remove packets from this queue using
skb_dequeue().
After an insertion saves the old tail pointer, hci_sched_iso() can dequeue
that packet and pass it to the driver. The driver can free the packet
before the insertion resumes and writes to the old tail's next pointer,
causing a use-after-free. Concurrent updates can also corrupt the queue.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10
Call Trace:
hci_send_iso+0xc7d/0xe10
iso_sock_sendmsg+0x710/0x900
__sys_sendto+0x34a/0x3a0
Allocated by task 86:
__alloc_skb+0xdd/0x820
alloc_skb_with_frags+0x7e/0x770
sock_alloc_send_pskb+0x67a/0x820
bt_skb_sendmsg.constprop.0+0xc0/0x6c0
iso_sock_sendmsg+0x44e/0x900
Freed by task 90:
kmem_cache_free+0xcb/0x3d0
vhci_read+0x33f/0x4d0
vfs_read+0x177/0xa20
Hold the queue lock across the entire fragment batch, as hci_queue_acl()
does, to serialize insertion against dequeue while preserving fragment
ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Lock parent access during enhanced SCO setup
Bluetooth: hci_conn: Lock parent access during enhanced SCO setup
hci_enhanced_setup_sync() runs on the request workqueue without the
hci_dev_lock held by its caller when setup was queued. Its CVSD
capability check and find_next_esco_param() dereference conn->parent
while the receive workqueue can unlink and release that parent.
The following interleaving can cause a use-after-free:
hci_enhanced_setup_sync() hci_disconn_complete_evt()
load conn->parent
hci_dev_lock()
hci_conn_del(ACL parent)
unlink SCO child
drop link's parent reference
clear child->parent
release ACL parent
bt_link_release()
kfree(parent)
hci_dev_unlock()
read parent->features[0][3]
The reference held for the queued SCO child does not keep its ACL parent
alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the
SCO setup context lifetime") protects the child stored in the queued
context, but leaves these parent accesses unprotected.
With a 40 ms diagnostic delay after loading conn->parent, an instrumented
kernel based on fd179f8a05be, which already contains 42de40abe25d,
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0
Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93
Call Trace:
hci_enhanced_setup_sync+0xda5/0xdf0
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x6b4/0x10e0
Allocated by task 92:
__hci_conn_add+0x304/0x1df0
hci_connect_acl+0x349/0x3e0
hci_connect_sco+0x3b/0x9a0
sco_sock_connect+0x475/0xca0
Freed by task 94:
kfree+0x121/0x3c0
bt_link_release+0x79/0xa0
device_release+0xc8/0x240
kobject_put+0x14d/0x280
hci_conn_del+0x524/0xe30
hci_disconn_complete_evt+0x403/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
The accessed address is 71 bytes into the freed ACL parent, at its
features[0][3] byte; the queued SCO child is a different object. The
diagnostic preserves the loaded parent across the delay, matching the
unmodified compiled capability check, and does not change the parent
references or teardown path.
Hold hci_dev_lock() across the codec switch, including every call to
find_next_esco_param(), and release it on all selection errors. Keep
configure_datapath_sync() outside the critical section because it waits
for HCI events. Preserve parameter selection and existing return values. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered without the `individualPermsChecker` middleware that enforces the visibility of the target user. An authenticated user could therefore read the followers, following list, starred and watched repositories and public SSH and GPG keys of a user with limited or private visibility, whom they could not otherwise see. The issue was fixed in 1.27.3 and 28.0.0 and disclosed with 28.2.0. |
| Deleting a label compared the ID of the repository in the request against the organization ID of organization labels, and the two ID sequences overlap. A user with write access to the issues of a repository could therefore delete the labels of an organization that has the same numeric ID as that repository. Labels are now deleted only within their own repository or organization. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: aw96103: validate firmware data length
The firmware parser reads a length from the binary header and then uses
it to walk six-byte register/value entries. A truncated firmware image
can make the parser read beyond the copied firmware buffer. A value
smaller than the four-byte count field also underflows, producing a very
large length.
Read the little-endian field with get_unaligned_le32(), as previously
proposed by David Lechner. Validate the header size, reject an
underflowed length, ensure the resulting payload is contained in the
firmware image, and require it to contain whole register/value entries. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16136: fix unprotected debugfs reads
The serial_number file operations are open coded and never call
debugfs_file_get(), which debugfs_create_file_unsafe() requires.
debugfs_remove_recursive() therefore does not wait for a read in
progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
adf4377_clk_register() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter is uninitialized, and
thus may cause a crash.
Similarly, adf4377_clk_register() fills in only parent_data.fw_name,
leaving other members of the clk_parent_data structure uninitialized.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind
The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix use-after-free on unbind
ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with
devm_krealloc() at runtime, so its devres entry sits after all
probe-time entries of the driver. devm resources are released in
reverse allocation order, which means unbind frees samples_buf before
iio_device_unregister() disables the buffers and detaches the trigger
pollfunc. The data ready IRQ is still enabled at that point, so
ad_sd_trigger_handler() can still run and memcpy() incoming samples
into the freed samples_buf.
Fix this by preallocating the buffer in
devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and
the IRQ are set up, so it is freed only after iio_device_unregister()
has drained the trigger handler via free_irq(). Size it for the worst
case of all sequencer slots being active; ad_sd_validate_scan_mask()
already caps the number of active channels at num_slots.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Prevent memory leak and fix state
The driver allocates memory for samples at buffer enable path. If regmap
operation fails in the kx022a_fifo_enable() at the buffer enable path, the
allocated memory is never freed. Furthermore, the state information and
previous hardware configuration(s) aren't undone, potentially leaving
WMI interrupts and buffers enabled, or driver state flags wrong.
Free the memory and revert the hardware configuration and state flags on
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: drain and invalidate before server-side copy/clone
cifs_file_copychunk_range() and the clone (FICLONE) path of
cifs_remap_file_range() do not serialise the destination page cache
against the server-side copy the way the other server-side range
operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range()
and smb3_insert_range()) do.
cifs_file_copychunk_range() invalidates the destination range with
filemap_invalidate_inode(), which takes and drops the mapping's
invalidate_lock internally, so the lock is no longer held when the
copychunk ioctl is issued. It also never drains in-flight netfs I/O on
the target. The clone path never takes the invalidate_lock at all (only
i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not
drain outstanding I/O.
As a result an asynchronous destination writeback can complete after the
server-side copy/clone has run and reinstate stale data over the region
just written by the server, corrupting the file. This is the same class
of corruption as commit d7d2adcd022b ("smb/client: flush dirty data
before punching a hole") and has been seen randomly in generic/363
against Windows Server.
Fix both paths to follow the established ordering: hold the target
mapping's invalidate_lock across the flush and invalidation of the
destination and the server ioctl, and call netfs_wait_for_outstanding_io()
on the target to drain in-flight writes before the ioctl is issued. Only
the target inode's invalidate_lock is required, as the source is merely
flushed and not invalidated; i_rwsem (already held via
lock_two_nondirectories()) is acquired before the invalidate_lock,
matching the VFS lock ordering. Since filemap_invalidate_inode() takes
that same lock internally, replace it with its own unmap/flush/invalidate
steps instead of calling it, and return early on a zero-length copy to
avoid a range underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush dirty data before zeroing a range
smb3_zero_range() emulates FALLOC_FL_ZERO_RANGE by invalidating the
page cache over the target range with truncate_pagecache_range() and
then issuing FSCTL_SET_ZERO_DATA to the server.
Dirty data was only flushed conditionally, when the range reached or
extended EOF. For a purely interior zero range that does not reach
EOF, no flush happened, so a dirty folio overlapping the range could
be written back to the server after the FSCTL and refill the range
that was just zeroed with stale data.
Fix this by unconditionally flushing and waiting for dirty data in the
range before invalidating the page cache and issuing
FSCTL_SET_ZERO_DATA, exactly as was done for smb3_punch_hole() in
commit d7d2adcd022b ("smb/client: flush dirty data before punching a
hole"); the two paths are structurally identical here.
This is observed as generic/363 randomly reading stale data where a
zeroed range is expected against Windows Server. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: flush and commit data before querying allocated ranges
The mode 0 / FALLOC_FL_KEEP_SIZE fallocate emulation for small interior
ranges in smb3_simple_fallocate_range() issues
FSCTL_QUERY_ALLOCATED_RANGES and zero-fills any sub-range the server
reports as an unallocated hole, to force block allocation without
changing file contents.
This is unsafe against Windows servers. Per the Win32 documentation,
FSCTL_QUERY_ALLOCATED_RANGES only reports ranges that *may* contain
nonzero data and is explicitly not coherent with recently written data:
"a call to FSCTL_QUERY_ALLOCATED_RANGES [after writing to a network
file] would not necessarily return a correct list of allocated
regions. To ensure coherency [...] flush the data to the file"
fsx (generic/363) reproduces the resulting corruption against Windows
Server 2022: a range is written, an uncached read returns the data, yet
the next FSCTL_QUERY_ALLOCATED_RANGES on that range reports it as a whole
hole, so the emulation overwrites live data with zeroes. A network trace
confirmed the WRITE, the READ returning data and the query returning an
empty range list within microseconds. Samba does not exhibit this; its
query is coherent with the written data.
Write back the dirty pages, drain any outstanding I/O and issue an SMB2
FLUSH to force the server to commit the data before querying the
allocated ranges, so the query reflects the data actually present.
With this, generic/363 passes against both Windows Server 2022 and Samba
over 100000 fsx operations. |
