| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mt7530: fix NULL dereference on unbind of MT7531 and MT7621
The core and io supplies are only requested for ID_MT7530: both the
devm_regulator_get() in probe and the regulator_enable() in
mt7530_setup() are guarded by the switch id, but mt7530_remove()
disables them unconditionally. On an MT7621 or an MT7531 both pointers
are still NULL from devm_kzalloc(), so rmmod or a sysfs unbind calls
regulator_disable() on NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: block: Fix zones_cond out-of-bounds write on zone report
blk_revalidate_disk_zones() sizes the zones_cond array from the disk
capacity and zone size, but the index used by blk_revalidate_zone_cond()
comes from the device-driven report_zones() walk and is never checked
against the array size. A device reporting more zones than fit the array
makes blk_zone_set_cond() write out of bounds.
One way to reach this is a zone count exceeding 32 bits: both
blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are
unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 +
1024 zones of one 512-byte logical block) gets its zone count truncated to
a small value, undersizing the array while the report walk keeps counting
upward.
Check the index against the array size before storing the zone condition,
and refuse to revalidate when the zone count does not fit 32 bits. |
| In the Linux kernel, the following vulnerability has been resolved:
squashfs: Add dictionary size range check to prevent shift-out-of-bounds
When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size
is 0) is mounted, and performs shift operations using dictionarysize, the
shift exponent is -1, causing a shift-out-of-bounds.
Detail as below:
squashfs_comp_opts(msblk, buffer, length)
squashfs_xz_comp_opts()
if (comp_opts)
n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1
if (opts->dict_size != (1 << n) && opts->dict_size !=
(1 << n) + (1 << (n + 1))) <----shift-out-of-bounds
Fix it by adding a dictionary size range check before the shift operation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure
pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features
when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE,
which is left set. Later vCPUs on that VM then skip the SVE setup and
register with a NULL sve_state, which the guest's first FP access hands
to sve_load_state().
Return the error without touching vcpu_features. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve()
pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided
sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl()
and the WARN_ON() there, which is fatal at EL2. The existing
!sve_state_size test rejects such a length, but only after the macro has
run.
Check sve_vl_valid() before deriving the state size. A valid length
cannot yield a zero size, so the !sve_state_size test goes with it. |
| The Management Console fails to properly validate input related to the configuration of JDBC user stores. This weakness allows an attacker to supply specially crafted input that can lead to the execution of arbitrary code on the affected server.
Successful exploitation of this vulnerability enables an attacker to execute arbitrary code on the server with the privileges of the WSO2 product. This could lead to a full compromise of the system. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix immediate JMP JEQ/JNE on MIPS32
An addu instruction was emitted instead of addiu, causing the immediate
value 1 to be interpreted as register $at. This made the comparison
result invalid when the immediate operand was negative. Note that $at
is mapped to BPF_REG_AX, which is used for constant blinding.
Fix the instruction to use the immediate form.
Found with test_bpf on MIPS32r1 emulated by QEMU. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: stop Tx NAPI before disabling the queues
bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend()
both disable the Tx queues first and stop Tx NAPI several steps later. A
completion in flight calls netif_tx_wake_queue() in between, and nothing
stops the queue again, so a transmit can reach the rings after they have
been freed.
Close is safe because dev_deactivate_many() stops the qdisc first.
bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both
paths.
KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend
freezes user space before the callback runs:
BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258
Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14
bcmgenet_xmit+0x17f8/0x2258
dev_hard_start_xmit+0x13c/0x588
sch_direct_xmit+0x108/0x340
__dev_queue_xmit+0x1190/0x3848 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid()
frame->ccid.datalen is read directly from the USB response frame
and used, unchecked, as an index into frame->data[]. A malicious or
malfunctioning device can set this field to an arbitrary value,
causing the driver to read far outside the received buffer.
Bound ccid.datalen against the maximum possible ACR122 frame size
before using it. This replaces the existing datalen == 0 check,
since datalen < 2 already covers that case and additionally
rejects datalen == 1, which would still underflow the
"datalen - 2" offset used below. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ISO15693 inventory length
The ISO15693 inventory helper removes a two-byte prefix without checking
that it exists, then accepts a one-byte remainder before reading data[1] as
the DSFID.
Require the prefix and at least two remaining bytes before copying the UID
data and reading the DSFID. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix race condition in accept_queue lifecycle
In nfc_llcp_socket_release(), sockets and listener accept queues are
walked under the local sockets rwlock and bh_lock_sock(). However,
bh_lock_sock() does not synchronise against process-context lock_sock()
held by nfc_llcp_accept_dequeue() during accept(). Because
socket_release() does not check sock_owned_by_user(), both paths can
concurrently unlink and release the same child socket, resulting in
use-after-free or a NULL pointer dereference of child->parent in
nfc_llcp_accept_unlink().
Fix this synchronisation race by having nfc_llcp_socket_release() use
process-context lock_sock() instead of bh_lock_sock():
1. Pop sockets from the local sockets list under the write lock using
nfc_llcp_sock_list_pop() so lock_sock() can be acquired without
holding the rwlock.
2. Because lock_sock() can sleep, defer the final release of the
nfc_llcp_local structure to a workqueue (release_work). This avoids
a sleeping-in-atomic bug when the last local reference is dropped
from softirq context. Additionally, hold a single device reference
on local from registration until final destruction.
3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent
resurrecting a local object whose teardown has been scheduled.
4. In llcp_sock_accept(), verify that the listener socket state is still
LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if
the listener is closed concurrently.
5. When unlinking unaccepted child sockets during listener release,
unlink them from local->sockets, call sock_orphan(), and drop their
initial sk_alloc creation reference via sock_put().
6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with
a NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nfcmrvl: validate helper command length before pull
The firmware download receive path removes the NCI data header and
reads the helper command before validating the remaining packet length.
A short frame can therefore reach the data access before the malformed
packet is rejected.
Validate the complete helper command length before stripping the NCI
data header. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Avoid rounding zero ring sizes
roundup_pow_of_two() is undefined for zero. ethtool permits a zero ring
size to reach the driver, where the minimum-size check should reject it.
Leave zero unchanged while rounding nonzero ring sizes. The minimum-size
check then rejects zero deterministically without changing the established
behavior for other values. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject pkt arguments in mutating subprogs
The verifier tracks changes in how PTR_TO_PACKET registers'
bounds are modified across subprog boundaries. PTR_TO_PACKET
registers are actually passed as PTR_TO_MEM, which is assumed
valid for the entire call. This is not the case with packet memory,
where a pskb_* call may invalidate its memory region.
Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that
may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET
because we would also need to somehow pass the PTR_TO_PACKET_META
or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing
the pointer in the subprog as PTR_TO_MEM, only permit it if the
subprog is guaranteed not to mutate the packet. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bounds check for skb-backed dynptrs
The skb_pointer_if_linear() function checks whether a
memory region of length len starting at offset off into
the skb is in the linear area, and returns a pointer to
the region if so. The check currently subtracts between
skb_headlen and offset of the check, and since skb_headlen
is unsigned the subtraction can underflow. This causes the
bounds check to spuriously pass and generate an arbitrary
pointer of the form *(skb->data + off).
The only user of this helper is currently skb-backed BPF
dynptr code. Returning the wrong pointer leads to the
dynptr erroneously being backed with invalid memory.
Ensure the subtraction cannot underflow, and fail the check if
it would. Use u64 arithmetic to also prevent overflow when
calculating (skb_headlen(skb) - off) since off is unsigned. |
| In the Linux kernel, the following vulnerability has been resolved:
net: spacemit: clear TX descriptor on fragment mapping failure
emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for
every slot beyond old_head as soon as that slot's memset()'d local
copy is committed with "*tx_desc_addr = tx_desc", i.e. before the
buffers for that slot have necessarily all been mapped successfully.
If emac_tx_map_frag() then fails on a later fragment, the err_free_skb
path calls emac_free_tx_buf() to unmap and drop the skb, but leaves
the already-written descriptor memory untouched, and tx_ring->head is
never advanced past old_head (the "tx_ring->head = head" store is
skipped by the goto).
So a slot between old_head and the rolled-back head can be left with
TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that
emac_free_tx_buf() just tore down, while software considers that slot
free again. The next successful emac_tx_mem_map() call only rebuilds
old_head itself; if the DMA engine auto-advances into the following
descriptor once it finishes old_head's packet, it will fetch that
stale, already-unmapped address.
emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing
the descriptor as a pair when reclaiming completed descriptors; do
the same in the mapping failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_info_copy()
When debug_register_static() fails, it clears areas, active_pages and
active_entries but leaves the area bounds unchanged. Copying such an
area, either by opening its view file or via debug_dump(), makes
debug_info_copy() dereference the NULL pointers.
Skip the copy loop when the source has no areas. |
| Use after free in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally. |
| Double free in Windows Wired AutoConfig Service allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range hw_next_to_clean (seen as 0xffff) while
the PCIe link/MAC is resetting. An out-of-range value can never be
reached and the loop below would spin forever. Treat it as "nothing
new to clean" instead. |
