| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When parsing a multipart form (either explicitly with Request.ParseMultipartForm or implicitly with Request.FormValue, Request.PostFormValue, or Request.FormFile), limits on the total size of the parsed form were not applied to the memory consumed while reading a single form line. This permits a maliciously crafted input containing very long lines to cause allocation of arbitrarily large amounts of memory, potentially leading to memory exhaustion. With fix, the ParseMultipartForm function now correctly limits the maximum size of form lines. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| quic-go is an implementation of the QUIC protocol in Go. Prior to version 0.42.0, an attacker can cause its peer to run out of memory sending a large number of `NEW_CONNECTION_ID` frames that retire old connection IDs. The receiver is supposed to respond to each retirement frame with a `RETIRE_CONNECTION_ID` frame. The attacker can prevent the receiver from sending out (the vast majority of) these `RETIRE_CONNECTION_ID` frames by collapsing the peers congestion window (by selectively acknowledging received packets) and by manipulating the peer's RTT estimate. Version 0.42.0 contains a patch for the issue. No known workarounds are available. |
| A security vulnerability in HPE IceWall Agent products could be exploited remotely to cause a denial of service. |
| Having a large number of address headers (From, To, Cc, Bcc, etc.) becomes excessively CPU intensive. With 100k header lines CPU usage is already 12 seconds, and in a production environment we observed 500k header lines taking 18 minutes to parse. Since this can be triggered by external actors sending emails to a victim, this is a security issue. An external attacker can send specially crafted messages that consume target system resources and cause outage. One can implement restrictions on address headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| Very large headers can cause resource exhaustion when parsing message. The message-parser normally reads reasonably sized chunks of the message. However, when it feeds them to message-header-parser, it starts building up "full_value" buffer out of the smaller chunks. The full_value buffer has no size limit, so large headers can cause large memory usage. It doesn't matter whether it's a single long header line, or a single header split into multiple lines. This bug exists in all Dovecot versions. Incoming mails typically have some size limits set by MTA, so even largest possible header size may still fit into Dovecot's vsz_limit. So attackers probably can't DoS a victim user this way. A user could APPEND larger mails though, allowing them to DoS themselves (although maybe cause some memory issues for the backend in general). One can implement restrictions on headers on MTA component preceding Dovecot. No publicly available exploits are known. |
| IBM Db2 Big SQL on Cloud Pak for Data versions 7.6 (on CP4D 4.8), 7.7 (on CP4D 5.0), and 7.8 (on CP4D 5.1) do not properly limit the allocation of system resources. An authenticated user with internal knowledge of the environment could exploit this weakness to cause a denial of service. |
| A Allocation of Resources Without Limits or Throttling vulnerability in sslh allows attackers to easily exhaust the file descriptors in sslh and deny legitimate users service.This issue affects sslh before 2.2.4. |
| An unauthenticated remote attacker can cause a DoS in the controller due to uncontrolled resource consumption. |
| Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface) framework/toolkit, designed for building async web services in Python. In versions 0.47.1 and below, when parsing a multi-part form with large files (greater than the default max spool size) starlette will block the main thread to roll the file over to disk. This blocks the event thread which means the application can't accept new connections. The UploadFile code has a minor bug where instead of just checking for self._in_memory, the logic should also check if the additional bytes will cause a rollover. The vulnerability is fixed in version 0.47.2. |
| A buffer-management vulnerability in OPC Foundation OPCFoundation.NetStandard.Opc.Ua.Core before 1.05.374.54 could allow remote attackers to exhaust memory resources. It is triggered when the system receives an excessive number of messages from a remote source. This could potentially lead to a denial of service (DoS) condition, disrupting the normal operation of the system. |
| An allocation of resources without limits or throttling vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to prevent other systems, applications, or processes from accessing the same type of resource.
We have already fixed the vulnerability in the following version:
File Station 5 5.5.6.4847 and later |
| An allocation-size-too-big bug in the component /imagebuf.cpp of OpenImageIO v3.1.0.0dev may cause a Denial of Service (DoS) when the program to requests to allocate too much space. |
| Botan is a C++ cryptography library. X.509 certificates can identify elliptic curves using either an object identifier or using explicit encoding of the parameters. Prior to versions 3.3.0 and 2.19.4, an attacker could present an ECDSA X.509 certificate using explicit encoding where the parameters are very large. The proof of concept used a 16Kbit prime for this purpose. When parsing, the parameter is checked to be prime, causing excessive computation. This was patched in 2.19.4 and 3.3.0 to allow the prime parameter of the elliptic curve to be at most 521 bits. No known workarounds are available. Note that support for explicit encoding of elliptic curve parameters is deprecated in Botan. |
| Minder is a software supply chain security platform. Prior to version 0.0.49, the Minder REST ingester is vulnerable to a denial of service attack via an attacker-controlled REST endpoint that can crash the Minder server. The REST ingester allows users to interact with REST endpoints to fetch data for rule evaluation. When fetching data with the REST ingester, Minder sends a request to an endpoint and will use the data from the body of the response as the data to evaluate against a certain rule. If the response is sufficiently large, it can drain memory on the machine and crash the Minder server. The attacker can control the remote REST endpoints that Minder sends requests to, and they can configure the remote REST endpoints to return responses with large bodies. They would then instruct Minder to send a request to their configured endpoint that would return the large response which would crash the Minder server. Version 0.0.49 fixes this issue. |
| Minder by Stacklok is an open source software supply chain security platform. Minder prior to version 0.0.51 is vulnerable to a denial-of-service (DoS) attack which could allow an attacker to crash the Minder server and deny other users access to it. The root cause of the vulnerability is that Minders sigstore verifier reads an untrusted response entirely into memory without enforcing a limit on the response body. An attacker can exploit this by making Minder make a request to an attacker-controlled endpoint which returns a response with a large body which will crash the Minder server. Specifically, the point of failure is where Minder parses the response from the GitHub attestations endpoint in `getAttestationReply`. Here, Minder makes a request to the `orgs/$owner/attestations/$checksumref` GitHub endpoint (line 285) and then parses the response into the `AttestationReply` (line 295). The way Minder parses the response on line 295 makes it prone to DoS if the response is large enough. Essentially, the response needs to be larger than the machine has available memory. Version 0.0.51 contains a patch for this issue.
The content that is hosted at the `orgs/$owner/attestations/$checksumref` GitHub attestation endpoint is controlled by users including unauthenticated users to Minders threat model. However, a user will need to configure their own Minder settings to cause Minder to make Minder send a request to fetch the attestations. The user would need to know of a package whose attestations were configured in such a way that they would return a large response when fetching them. As such, the steps needed to carry out this attack would look as such:
1. The attacker adds a package to ghcr.io with attestations that can be fetched via the `orgs/$owner/attestations/$checksumref` GitHub endpoint.
2. The attacker registers on Minder and makes Minder fetch the attestations.
3. Minder fetches attestations and crashes thereby being denied of service. |
| Allocation of Resources Without Limits or Throttling vulnerability in Legion of the Bouncy Castle Inc. BC Java bcprov on All (API modules), Legion of the Bouncy Castle Inc. BC-FJA bc-fips on All allows Excessive Allocation. This vulnerability is associated with program files https://github.com/bcgit/bc-java/blob/main/core/src/main/java/org/bouncycastle/asn1/ASN1ObjectIdenti... https://github.com/bcgit/bc-java/blob/main/core/src/main/java/org/bouncycastle/asn1/ASN1ObjectIdentifier.Java .
This issue affects BC Java: from 1.0 through 1.77; BC-FJA: from 1.0.0 through 1.0.2.5, from 2.0.0 through 2.0.1. |
| bep/imagemeta is a Go library for reading EXIF, IPTC and XMP image meta data from JPEG, TIFF, PNG, and WebP files. The buffer created for parsing metadata for PNG and WebP images was only bounded by their input data type, which could lead to potentially large memory allocation, and unreasonably high for image metadata. Before v0.11.0, If you didn't trust the input images, this could be abused to construct denial-of-service attacks. v0.11.0 added a 10 MB upper limit. |
| Insufficiently specific bounds checking on authorization header could lead to denial of service in the Temporal server on all platforms due to excessive memory allocation.This issue affects all platforms and versions of OSS Server prior to 1.26.3, 1.27.3, and 1.28.1 (i.e., fixed in 1.26.3, 1.27.3, and 1.28.1 and later). Temporal Cloud services are not impacted. |
| GraphQL Java (aka graphql-java) before 21.5 does not properly consider ExecutableNormalizedFields (ENFs) as part of preventing denial of service via introspection queries. 20.9 and 19.11 are also fixed versions. |
