| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ### Summary
When `qs.parse` is called with `comma: true` and `throwOnLimitExceeded: true`, a comma-separated value under a bracket-push key (`a[]=1,2,3,4`) is split into an array without being compared against `arrayLimit`, while the same value under a flat key (`a=1,2,3,4`), an indexed key (`a[0]=`), a nested key (`a[b]=`), or a dotted key (`a.b=` with `allowDots`) throws the documented `RangeError`. A single parameter such as `a[]=1,2,2,...` therefore produces an inner array of arbitrary length even though the caller opted into the hard limit. This is the `[]=` key form that the fix for CVE-2026-2391 (qs 6.14.2) did not cover.
### Details
In `lib/parse.js`, a comma-separated value under a `[]=` key is split and then wrapped as a single nested element (`val = [val]`, so that each `a[]=x,y` group counts as one element of the outer array). The `arrayLimit` check that 6.14.2 added for comma values runs after that wrap, so for `[]=` parts it only ever saw the wrapper of length 1. 6.15.3 added a pre-split comma count so that an oversized value throws before it is allocated, but gated it on an `isFlatArrayValue` flag that `parseValues` set to `false` for any part containing `[]=`, and did not pass it for object-valued input, so the gap remained.
#### PoC
```js
var qs = require('qs');
var options = { comma: true, arrayLimit: 3, throwOnLimitExceeded: true };
qs.parse('a=1,2,3,4', options); // RangeError: Array limit exceeded. Only 3 elements allowed in an array.
qs.parse('a[]=1,2,3,4', options); // { a: [ [ '1', '2', '3', '4' ] ] } (no throw)
qs.parse('a[]=' + '1,'.repeat(1000000) + '1', { comma: true, arrayLimit: 20, throwOnLimitExceeded: true });
// no throw; a 1,000,001-element inner array is allocated
```
#### Fix
`lib/parse.js`, applied in 8859c37 on `main` and released as v6.16.0: the `isFlatArrayValue` gate is removed, so every comma-split value is counted against `arrayLimit` before splitting regardless of key form. An in-limit group under `a[]=` still counts as one element of the outer array, and the default (`throwOnLimitExceeded: false`) path is unchanged.
### Affected versions
`>=6.14.2 <6.16.0`, fixed in v6.16.0.
v6.14.2 introduced `arrayLimit` enforcement for comma values (the fix for CVE-2026-2391) but only for values not under a `[]=` key, and every release from v6.14.2 through v6.15.3 has the same gap. v6.14.0 and v6.14.1, where `throwOnLimitExceeded` exists but does not apply to any comma form, are covered by CVE-2026-2391 rather than this record. Earlier lines (6.7.x through 6.13.x) have `comma` but no `throwOnLimitExceeded`, so there is no hard cap on any comma path to bypass; releases before 6.7.0 have no `comma` option.
### Impact
An unauthenticated attacker who can reach an application that parses untrusted query strings or urlencoded bodies with both `comma: true` and `throwOnLimitExceeded: true` (both non-default) can bypass the configured limit with a single `a[]=` parameter and force the parser to allocate an array proportional to the request size. The cost is strictly linear in the attacker-supplied bytes (about 0.1 microseconds and 6 to 7 retained bytes per input byte; the same out-of-memory threshold as the documented default `throwOnLimitExceeded: false` path), so a transport-layer request or body size limit bounds it completely (and node's default maximum HTTP header size of 16 KB already bounds the request line, so multi-megabyte payloads need a body parser). The impact is that an opt-in hard limit fails open on one key spelling, not unbounded allocation from a small input. |
| An issue in the RechargePut function of free5gc v4.0.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_admin lets any client that can reach the admin LiveView exhaust the BEAM atom table and crash the entire node.
Two LiveView event handlers interned atoms from unvalidated client input: AshAdmin.PageLive's set_actor built modules from the resource/domain payload with Module.concat/1, and AshAdmin.Components.Resource.Show's calculate converted every submitted form key with String.to_atom/1. Atoms are never garbage collected and the table is capped, so flooding either event with random names mints a new atom per request until the VM aborts, taking down every application on the node. The fix resolves the submitted resource/domain against the known shown resources and maps calculation keys to declared arguments, so no client-supplied string is interned.
This issue affects ash_admin: from 0.1.0 before 1.3.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_graphql allows an unauthenticated client to bypass the configured GraphQL query-complexity limit and force an unbounded database read.
AshGraphql.Graphql.Resolver.query_complexity/3 multiplies child complexity by the requested page size only when the argument map contains :limit (offset pagination). Relay connections and keyset pagination use first and last, which never match that clause and fall through to the catch-all that returns child_complexity + 1. A nested relay query such as posts(first: 500) { edges { node { comments(first: 500) { ... } } } } therefore scores as trivially cheap while materializing the full fan-out, passing an Absinthe max_complexity cap that rejects the equivalent limit-based query. The fix adds first and last clauses clamped to the action's page size.
This issue affects ash_graphql: from 0.16.23 before 1.11.0. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.8 before 19.1.7, 19.2 before 19.2.5, and 19.3 before 19.3.1 that, under certain conditions, could have allowed an authenticated user to cause a denial of service affecting background job processing, due to missing object count limits. |
| rclone is a command-line program to sync files and directories to and from different cloud storage providers. Prior to 1.75.0, the shared HTTP CONNECT helper in lib/proxy/http.go parses proxy CONNECT responses with http.ReadResponse over an unrestricted buffered reader, allowing a malicious or compromised configured proxy, or an active on-path actor controlling a plaintext HTTP proxy hop, to send oversized headers that grow memory until the rclone process fails. The affected helper is used by FTP and SFTP proxy connections, and SFTP reaches the parser before SSH server authentication, so target host key validation does not constrain a malicious proxy. This issue is fixed in 1.75.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: strictly check for maximum number of actions
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups. |
| spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations by sending many baggage: header lines, even when each individual value is within the 8192-byte per-value parse limit. This vulnerability is fixed in 1.41.0. |
| Multiple unbounded alloca() calls in the PulseAudio protocol server. |
| amqp091-go is a Go AMQP 0.9.1 client. Before version 1.13.0, a compromised or malicious AMQP broker can force the client to allocate resources for and process content body frames that exceed the negotiated frame_max limit. This can lead to unexpected memory consumption or application-layer denial of service (DoS), bypassing the protocol's built-in framing constraints. Version 1.13.0 contains a fix. No known workarounds are available. |
| RustDesk versions before 1.4.7 contain an uncontrolled speculative memory allocation vulnerability in BytesCodec. Before authentication, the decoder trusts the payload length encoded in a four-byte frame header and reserves that amount before receiving the payload. A crafted header can request up to 1,073,741,823 bytes of capacity, allowing unauthenticated attackers to use concurrent TCP connections to cause memory exhaustion and denial of service. The fix caps header-triggered speculative preallocation at 256 KiB. |
| vLLM up to and including 0.17.0 allows remote attackers to cause a Denial of Service via memory exhaustion. The AsyncMediaIO.fetch_audio and AsyncMediaIO.fetch_image functions in multimodal/inputs.py fetch user-supplied media URLs using aiohttp and call r.read() without enforcing a maximum response size, allowing an attacker to exhaust server memory by providing a URL to an arbitrarily large file. |
| An issue in the JsonSanitizer.sanitize() component of OWASP json-sanitizer v1.2.3 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| CodeChecker's massStoreRun processing path performs one-shot decompression of attacker-controlled, Base64-encoded zlib data without enforcing a maximum decompressed size.
An authenticated user with permission to store analysis runs can submit a highly compressed payload that expands to a significantly larger byte sequence. Because the entire decompressed output is materialized in memory before being written to a temporary file, a sufficiently large payload may exhaust process or host memory and consume substantial disk space, resulting in denial of service. |
| In Bouncy Castle for Java before 1.85, CRMF/CMP password-MAC honours unbounded iteration count. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bcpkix-fips 1.0.12 (1.0.X series), 2.0.12 (2.0.X series) and 2.1.12 (2.1.X series). |
| In Bouncy Castle for Java before 1.85, OpenPGP Argon2 S2K honours attacker-chosen memory and passes. This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bcpg-fips 1.0.13 (1.0.X series), 2.0.13 (2.0.X series) and 2.1.13 (2.1.X series). |
| An unauthenticated remote peer can crash any NIOWebSocket-based server (including Vapor and Hummingbird) with a single 11-byte frame sent after a completed WebSocket handshake, dropping all active connections until the process restarts. This vulnerability is addressed in swift-nio version 2.101.0. |
| Unauthenticated Denial of Service Attack in Smush Image Compression and Optimization <= 4.2.0 versions. |
| In Bouncy Castle for Java before 1.85, PKCS#12 MAC and bag-decryption KDF iteration-count bound (DoS). This issue also affects Bouncy Castle for Java LTS before 2.73.12, and Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 1.0.2.7 (1.0.X series), 2.0.2 (2.0.X series) and 2.1.3 (2.1.X series). |
